Writing poetically through the moving body: finding rhythm, presence and resonance

New Writing ◽  
2021 ◽  
pp. 1-10
Author(s):  
Joanne Yoo
Keyword(s):  
Author(s):  
Susanne Ravn

AbstractThis paper sets out from the hypothesis that the embodied competences and expertise which characterise dance and sports activities have the potential to constructively challenge and inform phenomenological thinking. While pathological cases present experiences connected to tangible bodily deviations, the specialised movement practices of dancers and athletes present experiences which put our everyday experiences of being a moving body into perspective in a slightly different sense. These specialised experiences present factual variations of how moving, sensing and interacting can be like for us as body-subjects. To use of these sources inevitably demands that qualitative research methodologies – especially short-term ethnographical fieldwork – form part of the research strategy and qualify the way the researcher involves a second-person perspective when interviewing dancers and athletes about their experiences. In the subsequent phases analysing the data generated, I argue that researchers first strive to achieve internal consistency of empirical themes identified in the case of movement practices in question thus keeping to a contextualised and lived perspective, also denoted as an emic perspective. In subsequent phases phenomenological insights are then actively engaged in the exploration and discussion of the possible transcendental structures making the described subjective experiences possible. The specialised and context-defined experiences of ‘what a moving body can be like’ are accordingly involved as factual variations to constructively add to and potentially challenge phenomenological descriptions. Lastly, I exemplify how actual research strategies have been enacted in a variety of projects involving professional dancers’, golfers’ and sports dancers’ practices and experiences, respectively.


Nature ◽  
1967 ◽  
Vol 215 (5106) ◽  
pp. 1160-1161 ◽  
Author(s):  
J. L. REDDING
Keyword(s):  

1981 ◽  
Vol 103 (4) ◽  
pp. 718-724 ◽  
Author(s):  
J. M. McCarthy ◽  
B. Roth

This paper develops the differential properties of ruled surfaces in a form which is applicable to spatial kinematics. Derivations are presented for the three curvature parameters which define the local shape of a ruled surface. Related parameters are also developed which allow a physical representation of this shape as generated by a cylindric-cylindric crank. These curvature parameters are then used to define all the lines in the moving body which instantaneously generate speciality shaped trajectories. Such lines may be used in the synthesis of spatial motions in the same way that the points on the inflection circle and cubic of stationary curvature are used to synthesize planar motion. As an example of this application several special sets of lines are defined: the locus of all lines which for a general spatial motion instantaneously generate helicoids to the second order and the locus of lines generating right hyperboloids to the third order.


2011 ◽  
Vol 689 ◽  
pp. 32-74 ◽  
Author(s):  
C.-K. Kang ◽  
H. Aono ◽  
C. E. S. Cesnik ◽  
W. Shyy

AbstractEffects of chordwise, spanwise, and isotropic flexibility on the force generation and propulsive efficiency of flapping wings are elucidated. For a moving body immersed in viscous fluid, different types of forces, as a function of the Reynolds number, reduced frequency (k), and Strouhal number (St), acting on the moving body are identified based on a scaling argument. In particular, at the Reynolds number regime of $O(1{0}^{3} \ensuremath{-} 1{0}^{4} )$ and the reduced frequency of $O(1)$, the added mass force, related to the acceleration of the wing, is important. Based on the order of magnitude and energy balance arguments, a relationship between the propulsive force and the maximum relative wing-tip deformation parameter ($\gamma $) is established. The parameter depends on the density ratio, St, k, natural and flapping frequency ratio, and flapping amplitude. The lift generation, and the propulsive efficiency can be deduced by the same scaling procedures. It seems that the maximum propulsive force is obtained when flapping near the resonance, whereas the optimal propulsive efficiency is reached when flapping at about half of the natural frequency; both are supported by the reported studies. The established scaling relationships can offer direct guidance for micro air vehicle design and performance analysis.


2011 ◽  
Vol 201-203 ◽  
pp. 632-636 ◽  
Author(s):  
Jie Fei Xie ◽  
Xin Hua Li ◽  
Hong Zhang

This paper mainly introduces a novel linear air conditioner compressor which is driven by the linear oscillatory motor with two divided moving body, of which the Cylinder-piston assembly presents symmetrical distribution along the axial direction. The compressor dynamics equations were built and solved numerically with the fourth order Runge-Kutta method. in the meantime, this paper emphatically analyzes the influence of those factors, such as the intake pressure, the exhaust pressure, the suction gas superheat, the cooling degree, on the compressor performance at varied operating conditions. These works shows that improving the suction gas pressure and reducing the exhuast pressure can help to increase the refrigeration capacity and energy efficiency ratio of the air conditioner compressor. Those analysis results provide theory foundation for design,development, and engineering application of this linear air-conditioner compressor.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Hakan Coşanay ◽  
Hakan F. Oztop ◽  
Fatih Selimefendigil

Purpose The purpose of this study is to perform computational analysis on the steady flow and heat transfer due to a slot nanojet impingement onto a heated moving body. The object is moving at constant speed and nanoparticle is included in the heat transfer fluid. The unsteady flow effects and interactions of multiple impinging jets are also considered. Design/methodology/approach The finite volume method was used as the solver in the numerical simulation. The movement of the hot body in the channel is also considered. Influence of various pertinent parameters such as Reynolds number, jet to target surface spacing and solid nanoparticle volume fraction on the convective heat transfer characteristics are numerically studied in the transient regime. Findings It is found that the flow field and heat transfer becomes very complicated due to the interaction of multiple impinging jets with the movement of the hot body in the channel. Higher heat transfer rates are achieved with higher values of Reynolds number while the inclusion of nanoparticles resulted in a small impact on flow friction. The middle jet was found to play an important role in the heat transfer behavior while jet and moving body temperatures become equal after t = 80. Originality/value Even though some studies exist for the application of jet impingement heat transfer for a moving plate, the configuration with a solid moving hot body on a moving belt under the impacts of unsteady flow effects and interactions of multiple impinging jets have never been considered. The results of the present study will be helpful in the design and optimization of various systems related to convective drying of products, metal processing industry, thermal management in electronic cooling and many other systems.


Author(s):  
Parisa Hosseini Tehrani ◽  
Sajad Pirmohammad

There is a growing interest in the use of thin-wall structures as a means of absorbing the kinetic energy of a moving body. Multi-layered thin-wall structures are more efficient and lighter than thick-wall structures, and show better crashworthiness characteristics. In this task, several concentric aluminum thin wall tubes as energy absorber under axial and oblique loading are studied and optimum combination of these tubes is presented. The weight of the tubes is optimized while crashworthiness of tubes is not compromised. The commercial finite element program LS-DYNA that offers non-linear dynamic simulation capabilities was used in this study.


2010 ◽  
Vol 50 (4) ◽  
pp. 787-798 ◽  
Author(s):  
Young Jin Jeon ◽  
Hyung Jin Sung
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document