A computational analysis on convective heat transfer for impinging slot nanojets onto a moving hot body

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Hakan Coşanay ◽  
Hakan F. Oztop ◽  
Fatih Selimefendigil
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Unsteady Flow ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Computational Analysis ◽  
Impinging Jets ◽  
Content Type ◽  
Moving Body ◽  
Flow Effects

Purpose The purpose of this study is to perform computational analysis on the steady flow and heat transfer due to a slot nanojet impingement onto a heated moving body. The object is moving at constant speed and nanoparticle is included in the heat transfer fluid. The unsteady flow effects and interactions of multiple impinging jets are also considered. Design/methodology/approach The finite volume method was used as the solver in the numerical simulation. The movement of the hot body in the channel is also considered. Influence of various pertinent parameters such as Reynolds number, jet to target surface spacing and solid nanoparticle volume fraction on the convective heat transfer characteristics are numerically studied in the transient regime. Findings It is found that the flow field and heat transfer becomes very complicated due to the interaction of multiple impinging jets with the movement of the hot body in the channel. Higher heat transfer rates are achieved with higher values of Reynolds number while the inclusion of nanoparticles resulted in a small impact on flow friction. The middle jet was found to play an important role in the heat transfer behavior while jet and moving body temperatures become equal after t = 80. Originality/value Even though some studies exist for the application of jet impingement heat transfer for a moving plate, the configuration with a solid moving hot body on a moving belt under the impacts of unsteady flow effects and interactions of multiple impinging jets have never been considered. The results of the present study will be helpful in the design and optimization of various systems related to convective drying of products, metal processing industry, thermal management in electronic cooling and many other systems.

Role of magnetic field on forced convection of nanofluid in a branching channel

2019 ◽  
Vol 30 (4) ◽  
pp. 1755-1772 ◽  
Author(s):  
Fatih Selimefendigil ◽  
Hakan F. Öztop ◽  
Ali J. Chamkha
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Reynolds Number ◽  
Convective Heat Transfer ◽  
Forced Convection ◽  
Convective Heat ◽  
Transfer Rate ◽  
Base Fluid ◽  
Hartmann Number ◽  
Content Type

Purpose Numerical study of nanofluid forced convection within a branching channel was performed under the influence of a uniform magnetic field. The purpose of this study is to enhance the heat transfer performance of the separated flow at the branching channel with the use of magnetic field and nanofluid. The use of magnetic field and enhancement in both the thermal conductivity and electrical conductivity with the inclusion of the nanoparticles provides favorable thermophysical properties of the nanofluid when it used as a heat transfer fluid in a branching channel. The results of this study may be used to control the thermal performance in a branching channel and further optimization studies in the presence of magnetic field. Design/methodology/approach Galerkin weighted residual finite element method was used for the simulations. The numerical simulation results are performed by changing the inclination angle of the lower branching channel (between 0° and 90°), thermophysical properties of the fluid via inclusion of nanoparticles (between 0 and 0.04), Reynolds number (between 100 and 400) and magnetic field strength (Hartmann number changes between 0 and 15). Findings It was observed that the recirculation zones and reattachment length of the upper and lower branching channels are affected by the variation of those parameters. Reattachment lengths increase with the augmentation of the Reynolds number and deterioration of the Hartmann number. Average Nusselt number becomes higher for higher values of Hartmann number and solid particle volume fraction. Inclusion of the nanoparticle to the base fluid is very effective for the configuration with higher values of Hartmann number. An optimum value of the inclination angle of the lower branching channel is observed, beyond which heat transfer rate is significantly reduced due to the establishment of a large vortex in the upper branching channel and restriction of the fluid motion. Originality/value In this study, forced convection of nanofluid flow in a branching channel under the effect of magnetic field was numerically studied. Magnetic field effects with nanoparticle inclusion to the base fluid on the convective heat transfer was analyzed for various inclination angles of the lower branching channel. Flow separation at the junction of the channels and thus convective heat transfer rate are influenced by the variation of these parameters. There are many studies related to application of the magnetic field with nanofluids, and a few of them are related to configurations with separated flows. To the best of the authors’ knowledge, there exist no studies for the application of nanofluids and magnetic field for the convective heat transfer in a branching channel. This topic is of importance as there are many engineering applications of the branching channels.

Effect of the grid geometry on the convective heat transfer of impinging jets

2017 ◽  
Vol 104 ◽  
pp. 39-50 ◽  
Author(s):  
Gioacchino Cafiero ◽  
Giusy Castrillo ◽  
Carlo Salvatore Greco ◽  
Tommaso Astarita
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Impinging Jets

scholarly journals Research on convective heat transfer characteristics of Fe3O4magnetic nanofluids under vertical magnetic field

2021 ◽  
pp. 151-151
Author(s):  
Ruihao Zhang ◽  
Sixian Wang ◽  
Shan Qing ◽  
Zhumei Luo ◽  
Zhang Xiaohui
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Reynolds Number ◽  
Field Strength ◽  
Convective Heat Transfer ◽  
Magnetic Field Strength ◽  
Convective Heat ◽  
Heat Transfer Characteristics ◽  
Magnetic Nanofluids ◽  
The Magnetic Field

This paper focuses on the convective heat transfer characteristics of Fe3O4 /Water magnetic nanofluids under laminar and turbulent conditions. After verifying the accuracy of the experimental apparatus, the effects of magnetic field strength, concentration, Reynolds number and temperature on the convective heat transfer coefficient have been studied. The convective heat transfer characteristics of nanofluids under laminar and turbulent flow conditions were studied in depth, and the influence of each factor on the heat transfer coefficient was analyzed by orthogonal experimental design method. Under the laminar flow conditions, the convective heat transfer of magnetic nanofluids performed best when the Reynolds number was 2000, the magnetic field strength was 600, the temperature was 30? and the concentration was 2%. And the convective heat transfer coefficient (h) increased by 3.96% than the distilled water in the same conditions. In turbulent state, the convective heat transfer of magnetic nanofluids performed the best when the Re was 6000, the magnetic field strength was 600, the temperature was 40? and the concentration was 2%. The h increased by 11.31% than the distilled water in the same Reynolds number and the magnetic field strength conditions.

Computational analysis of convective heat transfer properties of turbulent slot jet impingement

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Anuj Kumar Shukla ◽  
Anupam Dewan
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
High Efficiency ◽  
Stokes Equations ◽  
Turbulence Models ◽  
Jet Impingement ◽  
Complex Flow ◽  
Content Type

Purpose Convective heat transfer features of a turbulent slot jet impingement are comprehensively studied using two different computational approaches, namely, URANS (unsteady Reynolds-averaged Navier–Stokes equations) and SAS (scale-adaptive simulation). Turbulent slot jet impingement heat transfer is used where a considerable heat transfer enhancement is required, and computationally, it is a quite challenging flow configuration. Design/methodology/approach Customized OpenFOAM 4.1, an open-access computational fluid dynamics (CFD) code, is used for SAS (SST-SAS k-ω) and URANS (standard k-ε and SST k-ω) computations. A low-Re version of the standard k-ε model is used, and other models are formulated for good wall-refined calculations. Three turbulence models are formulated in OpenFOAM 4.1 with second-order accurate discretization schemes. Findings It is observed that the profiles of the streamwise turbulence are under-predicted at all the streamwise locations by SST k-ω and SST SAS k-ω models, but follow similar trends as in the reported results. The standard k-ε model shows improvements in the predictions of the streamwise turbulence and mean streamwise velocity profiles in the zone of outer wall jet. Computed profiles of Nusselt number by SST k-ω and SST-SAS k-ω models are nearly identical and match well with the reported experimental results. However, the standard k-ε model does not provide a reasonable profile or quantification of the local Nusselt number. Originality/value Hybrid turbulence model is suitable for efficient CFD computations for the complex flow problems. This paper deals with a detailed comparison of the SAS model with URANS and LES for the first time in the literature. A thorough assessment of the computations is performed against the results reported using experimental and large eddy simulations techniques followed by a detailed discussion on flow physics. The present results are beneficial for scientists working with hybrid turbulence models and in industries working with high-efficiency cooling/heating system computations.

Development and validation of an incompressible Navier-Stokes solver including convective heat transfer

2015 ◽  
Vol 25 (4) ◽  
pp. 861-886 ◽  
Author(s):  
Konstantinos Stokos ◽  
Socrates Vrahliotis ◽  
Theodora Pappou ◽  
Sokrates Tsangaris
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Laminar Flows ◽  
Navier Stokes ◽  
Content Type ◽  
Strongly Coupled ◽  
Loosely Coupled ◽  
Wide Range ◽  
Coupled Solution

Purpose – The purpose of this paper is to present a numerical method for the simulation of steady and unsteady incompressible laminar flows, including convective heat transfer. Design/methodology/approach – A node centered, finite volume discretization technique is applied on hybrid meshes. The developed solver, is based on the artificial compressibility approach. Findings – A sufficient number of representative test cases have been examined for the validation of this numerical solver. A wide range of the various dimensionless parameters were applied for different working fluids, in order to estimate the general applicability of our solver. The obtained results agree well with those published by other researchers. The strongly coupled solution of the governing equations showed superiority compared to the loosely coupled solution as inviscid effects increase. Practical implications – Convective heat transfer is dominant in a wide variety of practical engineering problems, such as cooling of electronic chips, design of heat exchangers and fire simulation and suspension in tunnels. Originality/value – A comparison between the strongly coupled solution and the loosely coupled solution of the Navier-Stokes and energy equations is presented. A robust upwind scheme based on Roe’s approximate Riemann solver is proposed.

An Experimental Study of Convective Heat Transfer in Radially Rotating Rectangular Ducts

1991 ◽  
Vol 113 (3) ◽  
pp. 604-611 ◽  
Author(s):  
C. Y. Soong ◽  
S. T. Lin ◽  
G. J. Hwang
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Reynolds Number ◽  
Aspect Ratio ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Rotational Speed ◽  
Main Flow ◽  
Buoyancy Flow ◽  
Aspect Ratios

The paper presents an experimental study of convective heat transfer in radially rotating isothermal rectangular ducts with various height and width aspect ratios. The convective heat transfer is affected by secondary flows resulting from Coriolis force and the buoyancy flow, which is in turn due to the centrifugal force in the duct. The growth and strength of the secondary flow depend on the rotational Reynolds number; the effect of the buoyancy flow is characterized by the rotational Rayleigh number. The aspect ratio of the duct may affect the secondary flow and the buoyancy flow, and therefore is also a critical parameter in the heat transfer mechanism. In the present work the effects of the main flow, the rotational speed, and the aspect ratio γ on heat transfer are subjects of major interest. Ducts of aspect ratios γ=5, 2, 1, 0.5, and 0.2 at rotational speed up to 3000 rpm are studied. The main flow Reynolds number ranges from 700 to 20,000 to cover the laminar, transitional, and turbulent flow regimes in the duct flow. Test data and discussion are presented.

Sign in / Sign up

Export Citation Format

Share Document