Efficacy of Detergent-Based Cleaning Methods Against Coronavirus MHV-A59 on Porous and Non-Porous Surfaces

2021 ◽  
pp. 1-13
Author(s):  
Rachael L. Hardison ◽  
Sarah W. Nelson ◽  
Daniela Barriga ◽  
Jessica M. Ghere ◽  
Gabrielle A. Fenton ◽  
...  
Keyword(s):  
Porous Surfaces ◽  
Cleaning Methods

TEM characterization of silicon epitaxial layer grown on Si-TaS2, eutectic composites

1991 ◽  
Vol 49 ◽  
pp. 802-803
Author(s):  
C.M. Sung ◽  
M. Levinson ◽  
M. Tabasky ◽  
K. Ostreicher ◽  
B.M. Ditchek
Keyword(s):  
Substrate Surface ◽  
Bulk Sample ◽  
Surface Cleaning ◽  
Native Oxide ◽  
Czochralski Growth ◽  
Ion Milling ◽  
Cross Sectional ◽  
Cleaning Methods ◽  
Field Emission Cathodes

Directionally solidified Si/TaSi2 eutectic composites for the development of electronic devices (e.g. photodiodes and field-emission cathodes) were made using a Czochralski growth technique. High quality epitaxial growth of silicon on the eutectic composite substrates requires a clean silicon substrate surface prior to the growth process. Hence a preepitaxial surface cleaning step is highly desirable. The purpose of this paper is to investigate the effect of surface cleaning methods on the epilayer/substrate interface and the characterization of silicon epilayers grown on Si/TaSi2 substrates by TEM.Wafers were cut normal to the <111> growth axis of the silicon matrix from an approximately 1 cm diameter Si/TaSi2 composite boule. Four pre-treatments were employed to remove native oxide and other contaminants: 1) No treatment, 2) HF only; 3) HC1 only; and 4) both HF and HCl. The cross-sectional specimens for TEM study were prepared by cutting the bulk sample into sheets perpendicular to the TaSi2 fiber axes. The material was then prepared in the usual manner to produce samples having a thickness of 10μm. The final step was ion milling in Ar+ until breakthrough occurred. The TEM samples were then analyzed at 120 keV using the Philips EM400T.

Photocatalytic activity of TiO2 synthesized by anodization and anodic spark deposition

MRS Advances ◽  
2020 ◽  
Vol 5 (61) ◽  
pp. 3141-3152
Author(s):  
Alma C. Chávez-Mejía ◽  
Génesis Villegas-Suárez ◽  
Paloma I. Zaragoza-Sánchez ◽  
Rafael Magaña-López ◽  
Julio C. Morales-Mejía ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Surface Characteristics ◽  
Amorphous Solids ◽  
X Ray Diffraction ◽  
X Ray ◽  
Catalytic Activities ◽  
Anodic Spark Oxidation ◽  
Porous Surfaces ◽  
Scanning Electron

AbstractSeveral photocatalysts, based on titanium dioxide, were synthesized by spark anodization techniques and anodic spark oxidation. Photocatalytic activity was determined by methylene blue oxidation and the catalytic activities of the catalysts were evaluated after 70 hours of reaction. Scanning Electron Microscopy and X Ray Diffraction analysis were used to characterize the catalysts. The photocatalyst prepared with a solution of sulfuric acid and 100 V presented the best performance in terms of oxidation of the dye (62%). The electric potential during the synthesis (10 V, low potential; 100 V, high potential) affected the surface characteristics: under low potential, catalyst presented smooth and homogeneous surfaces with spots (high TiO2 concentration) of amorphous solids; under low potential, catalyst presented porous surfaces with crystalline solids homogeneously distributed.

Tropolone-Based Treatments for Visualising Latent Fingermarks on Porous Surfaces

2019 ◽  
Author(s):  
Clara M. Agapie ◽  
Melissa Sampson ◽  
William Gee
Keyword(s):  
Amino Acids ◽  
Uv Radiation ◽  
Membered Ring ◽  
Diazonium Salts ◽  
Chemical Detection ◽  
Latent Fingerprints ◽  
Porous Surfaces

The work describes a new chemical means of visualising latent fingerprints (fingermarks) using tropolone. Tropolone reacts with amino acids within the fingermark residue to form adducts that absorb UV radiation. These adducts provide useful contrast on highly-fluorescent prous surfaces will illuminated with UV radiation. The conjugated seven-membered ring of the tropolone adduct can be reacted further diazonium salts, which is demonstrated here with formation of two dyes. The methodology is extremely rapid, occurring in minutes with mild heating, and can be applied before ninhydrin in a chemical detection sequence. <br>

Effect of Different Cleaning and Sterilization Methods on the Surface Morphology of Mini-implants

2017 ◽  
Vol 68 (9) ◽  
pp. 1974-1977
Author(s):  
Silvia Izabella Pop ◽  
Dana Cristina Bratu ◽  
Violeta Valentina Merie ◽  
Mariana Pacurar ◽  
Catalin Petru Simon ◽  
...  
Keyword(s):  
Surface Morphology ◽  
Surface Topography ◽  
Distilled Water ◽  
Mini Implants ◽  
Cleaning Methods ◽  
Sem Analyses

The objective of this study was to analyse morphological and surface topography variations of two types of mini-implants after using different chemical and physical cleaning methods and autoclaved sterilization. One hundred mini-implants from two different manufacturers were used in this study. The mini-implants from each manufacturer were divided in five groups, each consisting of ten samples: G0 new, unused, G1 ultrasonically cleaned, G2 chemically cleaned, G3 sandblasted, G4 cleaned with distilled water. SEM analyses of the mini-implants were performed. Only procedures used in samples from group G2 and G3 removed the tissue remains from the mini-implants surface.

The Hard Sell

2017 ◽  
Author(s):  
Peter Scott
Keyword(s):  
Price Competition ◽  
New Economy ◽  
The United States ◽  
Vacuum Cleaner ◽  
Firm Level ◽  
Direct Sales ◽  
Cost Distribution ◽  
Household Cleaning ◽  
Time Savings ◽  
Cleaning Methods

The vacuum cleaner was an archetypal new economy product of the early twentieth century. It offered both major time savings and qualitative advantages over previous household cleaning methods—the brush, broom, and manual carpet sweeper—and was sold in a novel way (by household demonstration). The direct sales techniques pioneered by vacuum manufacturers in the United States were to have a profound impact on the way vacuums were sold in Britain, and globally. Yet by 1939 their household diffusion was relatively slow compared to refrigerators or washing machines. This chapter explores why the industry evolved a structure based on high prices, high cost distribution methods (door-to-door sales), and a strong emphasis on non-price competition, based on differentiation through features. It also shows how door-to-door selling eventually came to constitute both a key firm-level competitive advantage and a substantial industry-level constraint on product diffusion.

Sign in / Sign up

Export Citation Format

Share Document