Modeling of the Extraction of Lanthanide Nitrates from Aqueous Solutions Over a Wide Range of Activities by CMPO

2004 ◽  
Vol 22 (5) ◽  
pp. 791-811 ◽  
Author(s):  
S. Belair ◽  
C. Lamouroux ◽  
M. Tabarant ◽  
A. Labet ◽  
C. Mariet ◽  
...  
2019 ◽  
Vol 4 (1) ◽  
pp. 231-235 ◽  
Author(s):  
Fengying Guan ◽  
Jun Zhang ◽  
Heming Tang ◽  
Liping Chen ◽  
Xinjian Feng

Gaseous reactants play a key role in a wide range of biocatalytic reactions, however reaction kinetics are generally limited by the slow mass transport of gases (typically oxygen) in or through aqueous solutions. Herein we address this limitation by developing a triphase reaction system.


2020 ◽  
Author(s):  
Ana Roza ◽  
Amalia Jiménez ◽  
Lurdes Fernández-Díaz

<p>Interface-coupled dissolution-precipitation (ICDP) reactions lead to the pseudomorphic replacement of minerals in a wide range of geological settings, exerting a significant impact in geochemical cycles (Putnis 2002). ICDP reactions play a major role in the diagenetic evolution of sedimentary rocks, specially of limestones and evaporites. Recent experimental works have studied ICDP reactions that lead to the formation of CaCO<sub>3</sub> pseudomorphs after anhydrite (CaSO<sub>4</sub>), upon interaction of the latter phase with carbonated aqueous solutions. These pseudomorphs are highly porous polycrystalline aggregates that mainly consist of calcite (Roncal-Herrero et al. 2018; Altree-Williams et al. 2017). The formation of a large volume of interconnected microporosity that balances the molar volume loss associated to the anhydrite-calcite transformation as well as the specific arrangement of this microporosity, influenced by the existence of epitactic relationships between anhydrite and calcite, facilitate the progress of the ICDP reaction.</p><p>Here, we study the ICDP reaction that leads to the formation of hydroxyapatite (Ca<sub>5</sub>(PO<sub>4</sub>)<sub>3</sub>(OH)) pseudomorphs after the interaction of anhydrite with phosphate-bearing aqueous solutions at temperatures 90 to180ºC during times that range from one hour to five weeks. The X-ray diffraction Rietveld analysis of the transformed samples indicates that the kinetics of the pseudomorphic transformation of anhydrite into hydroxyapatite strongly depends on temperature.  Thus, while at 180ºC a 100% transformation yield is attained in few hours, it takes five weeks of interaction at 90ºC. Scanning Electron Microscopy imagining of transformed samples shows the very good preservation of both, the original external shape and microtopographic features of anhydrite crystals. On cross-cut sections of partially replaced by hydroxyapatite anhydrite crystals we observe that the transformation advances from the surface inwards, with sharp separating the by replaced layer from the unreacted anhydrite core. Furthermore, this replaced layer is structured into a compact ~ 50 µm thick outer rim, which consists of coalescent small (~ 5 µm) hydroxyapatite crystals, and a progressively thickening inner region formed by hydroxyapatite columnar crystals in a stockade-like arrangement. This latter region is highly porous. We interpret these results taking into consideration the differences in solubility and molar volume between anhydrite and hydroxyapatite as well as the similarities/differences between the crystal structures of these phases. By comparing the characteristics of different ICDP reactions that involve anhydrite in sedimentary basins we derive implications about the diagenetic evolution of calcium sulphate evaporites. </p><p> </p><p>Altree-Williams, Alexander, et al. (2017). <em>ACS Earth and Space Chemistry</em> 1.2, 89-100.</p><p>Roncal-Herrero, Teresa, et al. (2017): <em>American Mineralogist</em> 102.6, 1270-1278.</p><p>Putnis A: (2002): <em>Mineralogical Magazine</em> 66.5, 689-708.</p><p> </p><p> </p>


2008 ◽  
Vol 73 (2) ◽  
pp. 197-209 ◽  
Author(s):  
Danica Bajuk-Bogdanovic ◽  
Ivanka Holclajtner-Antunovic ◽  
Marija Todorovic ◽  
Ubavka Mioc ◽  
Joanna Zakrzewska

The behaviour of two heteropolyacids (HPAs) with quite different stability in aqueous solutions was systematically investigated by UV, IR and NMR spectroscopy and potentiometric titration. It was shown that the Keggin structure of 12-tungstosilicic acid (H4SiW12O40, WSiA) anion was sustained over a wide range of pH from 1.0 to 7.0, while the same anion type of 12-molybdophosphoric acid (H3PMo12O40, MoPA) was present only at pH 1.0. This means that under physiological conditions WSiA is dominantly present in the form of a Kegginanion, whereas the structure of MoPA is completely decomposed to molybdate and phosphate. The obtained results are of special importance for bio-medical and catalytic applications of these compounds and for a better understanding of the mechanism of their action.


1988 ◽  
Vol 66 (5) ◽  
pp. 1153-1158 ◽  
Author(s):  
Peter Smith ◽  
Jill Suzanne Robertson

Using rapid-mixing, continuous-flow TiCl3-based techniques and also by means of static-sample studies involving the thermal decomposition of symmetric aliphatic azo compounds, we have characterized by electron paramagnetic resonance 22 spin adducts of 3,5-dibromo-4-nitrosobenzenesulphonate, 1, in aqueous solution at 25 °C. These spin adducts, all nitroxides, exhibit a moderately wide range of a-nitrogen and β-CH proton splitting constants, which we discuss in terms of steric and electronic effects. In connection with these studies, blank experiments showed that aqueous solutions of 1 gave no radicals when exposed to light and heat. In addition, we have studied by electron paramagnetic resonance at 25 °C static samples of aqueous solutions of 1 both by itself and in the presence of each of several acrylic and methacrylic monomers and in both the presence and absence of light. These solutions yielded radicals, namely, nitroxides, only when containing methacrylic monomers, the presence of light having no effect. These observations support the "ene" addition/oxidation mechanism of nitroxide formation.


1949 ◽  
Vol 27b (4) ◽  
pp. 318-331 ◽  
Author(s):  
K. W. Young ◽  
A. J. Allmand

The photodecompositions of aqueous solutions of chlorine, hypochlorous acid, and sodium hypochlorite have been studied under a variety of conditions involving a wide range of pH, with particular attention paid to the quantum efficiency and to the proportions of the products. Reaction schemes are suggested to account for the results.


2015 ◽  
Vol 5 (4) ◽  
pp. 610-618 ◽  
Author(s):  
Qian Liu ◽  
Lujie Zhang ◽  
Pan Hu ◽  
Ruihua Huang

In this work, activated carbon (AC) coated by chitosan was synthesized and characterized by Fourier transform infrared spectrophotometer and scanning electron microscope (SEM) techniques. The removal of aniline from aqueous solutions by AC coated by chitosan was investigated. The factors affecting the adsorption of aniline onto AC coated by chitosan, including the ratio of AC to chitosan, adsorbent dosage, pH value of solution, initial aniline concentration, and contact time were evaluated. These results showed that the optimum operating conditions were: the ratio of AC to chitosan = 0.5, adsorbent dosage = 0.2 g, and the adsorption of aniline from aqueous solutions had better removal in the concentration range of 20–50 mg/L. This adsorbent allowed high removal toward aniline in a wide range of pH. The equilibrium time was 100 minutes. The Freundlich model exhibited better correlation of the equilibrium adsorption data. The pseudo-second-order kinetic equation could better describe the kinetic behavior of aniline adsorption.


2013 ◽  
Vol 13 (1) ◽  
pp. 90-98 ◽  

The removal of dyes from colored effluents, particularly from textile industries, is one of the major environmental concerns these days. Current methods for removing dyes from wastewaters are costly and cannot effectively be used to treat wide range of such wastewaters. This work describes the use of grounded rice hull as adsorbent material. Aqueous solutions of various methylene blue dye concentrations (5-25 mg l-1) were shaken with certain amount of adsorbents to determine the adsorption capacity. Both treated and untreated rice hulls were used for methylene blue adsorption. The effects of adsorbents dose, initial pH, initial dye concentration and contact time on dye removal have been studied. Maximum dye was sequestered from the solution within 60-90 min after the beginning of every experiment. The adsorption capacity increased from 72 to 94 % with increasing the pH from 3 to 10. Pretreatment of rice hulls with citric acid did not reveal any beneficial effect. Rice hulls were more effective compared to commercial used adsorbents used. The results showed that ground rice hulls can be considered as potential adsorbents for methylene blue removal from dilute aqueous solutions.


Sign in / Sign up

Export Citation Format

Share Document