scholarly journals Direct visualization of the microtubule lattice seam both in vitro and in vivo.

1994 ◽  
Vol 127 (6) ◽  
pp. 1965-1971 ◽  
Author(s):  
M Kikkawa ◽  
T Ishikawa ◽  
T Nakata ◽  
T Wakabayashi ◽  
N Hirokawa
Keyword(s):  
Electron Microscopy ◽  
Lattice Structure ◽  
X Ray Diffraction ◽  
Beta Tubulin ◽  
Structural Investigations ◽  
Cytoplasmic Microtubules ◽  
Type Lattice ◽  
Closed Lattice

Microtubules are constructed from alpha- and beta-tubulin heterodimers that are arranged into protofilaments. Most commonly there are 13 or 14 protofilaments. A series of structural investigations using both electron microscopy and x-ray diffraction have indicated that there are two potential lattices (A and B) in which the tubulin subunits can be arranged. Electron microscopy has shown that kinesin heads, which bind only to beta-tubulin, follow a helical path with a 12-nm pitch in which subunits repeat every 8-nm axially, implying a primarily B-type lattice. However, these helical symmetry parameters are not consistent with a closed lattice and imply that there must be a discontinuity or "seam" along the microtubule. We have used quick-freeze deep-etch electron microscopy to obtain the first direct evidence for the presence of this seam in microtubules formed either in vivo or in vitro. In addition to a conventional single seam, we have also rarely found microtubules in which there is more than one seam. Overall our data indicates that microtubules have a predominantly B lattice, but that A lattice bonds between tubulin subunits are found at the seam. The cytoplasmic microtubules in mouse nerve cells also have predominantly B lattice structure and A lattice bonds at the seam. These observations have important implications for the interaction of microtubules with MAPs and with motor proteins, and for example, suggest that kinesin motors may follow a single protofilament track.

scholarly journals In vivo coassembly of a divergent beta-tubulin subunit (c beta 6) into microtubules of different function.

1987 ◽  
Vol 105 (5) ◽  
pp. 2179-2190 ◽  
Author(s):  
H C Joshi ◽  
T J Yen ◽  
D W Cleveland
Keyword(s):  
Random Copolymers ◽  
Resolution Limit ◽  
Beta Tubulin ◽  
Tubulin Isotypes ◽  
Tubulin Isotype ◽  
Tubulin Subunit ◽  
Cytoplasmic Microtubules ◽  
Chicken Erythrocytes

alpha- and beta-Tubulin are encoded in vertebrate genomes by a family of approximately 6-7 functional genes whose polypeptide products differ in amino acid sequence. In the chicken, one beta-tubulin isotype (c beta 6) has previously been found to be expressed only in thrombocytes and erythroid cells, where it is assembled into a circumferential ring of marginal band microtubules. In light of its unique in vivo utilization and its divergent assembly properties in vitro, we used DNA transfection to test whether this isotype could be assembled in vivo into microtubules of divergent functions. Using an antibody specific to c beta 6, we have found that upon transfection this polypeptide is freely coassembled into an extensive array of interphase cytoplasmic microtubules and into astral and pole-to-chromosome or pole-to-pole microtubules during mitosis. Further, examination of developing chicken erythrocytes reveals that both beta-tubulins that are expressed in these cells (c beta 6 and c beta 3) are found as co-polymers of the two isoforms. These results, in conjunction with efforts that have localized various other beta-tubulin isotypes, demonstrate that to the resolution limit afforded by light microscopy in vivo microtubules in vertebrates are random copolymers of available isotypes. Although these findings are consistent with functional interchangeability of beta-tubulin isotypes, we have also found that in vivo microtubules enriched in c beta 3 polypeptides are more sensitive to cold depolymerization than those enriched in c beta 6. This differential quantitative utilization of the two endogenous isotypes documents that some in vivo functional differences between isotypes do exist.

scholarly journals Assessment of SnFe2O4 Nanoparticles for Potential Application in Theranostics: Synthesis, Characterization, In Vitro, and In Vivo Toxicity

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 825
Author(s):  
Saman Sargazi ◽  
Mohammad Reza Hajinezhad ◽  
Abbas Rahdar ◽  
Muhammad Nadeem Zafar ◽  
Aneesa Awan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
A549 Cells ◽  
In Vitro Cytotoxicity ◽  
Hek293 Cells ◽  
Hydrothermal Route ◽  
X Ray ◽  
Tin Chloride ◽  
Bet Analysis

In this research, tin ferrite (SnFe2O4) NPs were synthesized via hydrothermal route using ferric chloride and tin chloride as precursors and were then characterized in terms of morphology and structure using Fourier-transform infrared spectroscopy (FTIR), Ultraviolet–visible spectroscopy (UV-Vis), X-ray power diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), and Brunauer–Emmett–Teller (BET) method. The obtained UV-Vis spectra was used to measure band gap energy of as-prepared SnFe2O4 NPs. XRD confirmed the spinel structure of NPs, while SEM and TEM analyses disclosed the size of NPs in the range of 15–50 nm and revealed the spherical shape of NPs. Moreover, energy dispersive X-ray spectroscopy (EDS) and BET analysis was carried out to estimate elemental composition and specific surface area, respectively. In vitro cytotoxicity of the synthesized NPs were studied on normal (HUVEC, HEK293) and cancerous (A549) human cell lines. HUVEC cells were resistant to SnFe2O4 NPs; while a significant decrease in the viability of HEK293 cells was observed when treated with higher concentrations of SnFe2O4 NPs. Furthermore, SnFe2O4 NPs induced dramatic cytotoxicity against A549 cells. For in vivo study, rats received SnFe2O4 NPs at dosages of 0, 0.1, 1, and 10 mg/kg. The 10 mg/kg dose increased serum blood urea nitrogen and creatinine compared to the controls (P < 0.05). The pathology showed necrosis in the liver, heart, and lungs, and the greatest damages were related to the kidneys. Overall, the in vivo and in vitro experiments showed that SnFe2O4 NPs at high doses had toxic effects on lung, liver and kidney cells without inducing toxicity to HUVECs. Further studies are warranted to fully elucidate the side effects of SnFe2O4 NPs for their application in theranostics.

scholarly journals Cemp1-p3 Peptide Promotes the Transformation of Octacalcium Phosphate into Hydroxyapatite Crystals

Crystals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1131
Author(s):  
Maricela Santana ◽  
Gonzalo Montoya ◽  
Raúl Herrera ◽  
Lía Hoz ◽  
Enrique Romo ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Octacalcium Phosphate ◽  
Sequence Motifs ◽  
Simple Method ◽  
Transmission Electron ◽  
Precursor Phase ◽  
Mineralized Tissues ◽  
Potent Growth

Dental cementum contains unique molecules that regulate the mineralization process in vitro and in vivo, such as cementum protein 1 (CEMP1). This protein possesses amino acid sequence motifs like the human recombinant CEMP1 with biological activity. This novel cementum protein 1-derived peptide (CEMP1-p3, from the CEMP1’s N-terminal domain: (QPLPKGCAAVKAEVGIPAPH), consists of 20 amino acids. Hydroxyapatite (HA) crystals could be obtained through the combination of the amorphous precursor phase and macromolecules such as proteins and peptides. We used a simple method to synthesize peptide/hydroxyapatite nanocomposites using OCP and CEMP1-p3. The characterization of the crystals through scanning electron microscopy (SEM), powder X-ray diffraction (XRD), high--resolution transmission electron microscopy (HRTEM), and Raman spectroscopy revealed that CEMP1-p3 transformed OCP into hydroxyapatite (HA) under constant ionic strength and in a buffered solution. CEMP1-p3 binds and highly adsorbs to OCP and is a potent growth stimulator of OCP crystals. CEMP1-p3 fosters the transformation of OCP into HA crystals with crystalline planes (300) and (004) that correspond to the cell of hexagonal HA. Octacalcium phosphate crystals treated with CEMP1-p3 grown in simulated physiological buffer acquired hexagonal arrangement corresponding to HA. These findings provide new insights into the potential application of CEMP1-p3 on possible biomimetic approaches to generate materials for the repair and regeneration of mineralized tissues, or restorative materials in the orthopedic field.

Reepithelialization of Orthotopic Tracheal Allografts Prevents Rejection after Withdrawal of Immunosuppression

2005 ◽  
Vol 114 (4) ◽  
pp. 279-288 ◽  
Author(s):  
Satish Govindaraj ◽  
Elena Fedorova ◽  
Eric M. Genden ◽  
Houtan Chaboki ◽  
Jonathan S. Bromberg ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Cyclosporine A ◽  
Allograft Rejection ◽  
Lymphocyte Subpopulation ◽  
Ciliated Epithelium ◽  
Prior Work ◽  
Cellular Infiltrate ◽  
Tracheal Transplantation

Prior work has demonstrated that immunosuppressed orthotopic tracheal allografts undergo progressive reepithelialization over a 48-day period with recipient-derived tracheal epithelium. We hypothesized that reepithelialization of tracheal allografts would prevent rejection after withdrawal of immunosuppression. BALB/c murine tracheal grafts were transplanted orthotopically into either syngeneic or allogeneic C57/BL6 recipients. The recipients were either not immunosuppressed, immunosuppressed with cyclosporine A (10 mg/kg per day) continuously, or immunosuppressed for 48 days and then withdrawn from immunosuppression. The grafts were assessed for acute and chronic rejection 10 days and 50 days after immunosuppression withdrawal. The immunosuppressed allograft recipients maintained a ciliated epithelium acutely and chronically after immunosuppression withdrawal. Ten days after immunosuppression withdrawal, there was a mild cellular infiltrate, which resolved 50 days after withdrawal. Electron microscopy, lymphocyte subpopulation assays, and lamina propria analysis demonstrated that immunosuppression withdrawal did not result in tracheal allograft rejection. In vitro and in vivo assessments did not demonstrate evidence of systemic or local immune tolerance. We conclude that reepithelialization of orthotopic tracheal allografts with recipient-derived mucosa prevents rejection of allograft segments. Tracheal transplantation may require only transient immunosuppression, which can be withdrawn after tracheal reepithelialization.

scholarly journals Influence of the centrosome on the structure of nucleated microtubules.

1985 ◽  
Vol 100 (4) ◽  
pp. 1185-1191 ◽  
Author(s):  
L Evans ◽  
T Mitchison ◽  
M Kirschner
Keyword(s):  
Lattice Structure ◽  
Neuroblastoma Cells ◽  
Nucleation Sites ◽  
Self Assembled ◽  
Brain Microtubules

The capacity of the centrosome to influence the lattice structure of nucleated microtubules was studied in vitro. Brain microtubules self-assembled to give predominantly (98%) 14-protofilament microtubules. However, under exactly the same conditions of assembly they grew off of purified centrosomes from neuroblastoma cells to give mostly (82%) 13-protofilament microtubules. Thus, the nucleation sites on the centrosome constrained the microtubule lattice to yield the number of protofilaments usually found in vivo.

Effects of dietary alteration of bicarbonate and magnesium on rat bone

1986 ◽  
Vol 250 (2) ◽  
pp. F302-F307 ◽  
Author(s):  
J. M. Burnell ◽  
C. Liu ◽  
A. G. Miller ◽  
E. Teubner
Keyword(s):  
Crystal Structure ◽  
Bone Formation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Growing Rats ◽  
Final Composition ◽  
Rat Bone

To study the effects of bicarbonate and magnesium on bone, mild acidosis and/or hypermagnesemia were produced in growing rats by feeding ammonium chloride and/or magnesium sulfate. Bone composition, quantitative histomorphometry, and mineral x-ray diffraction (XRD) characteristics were measured after 6 wk of treatment. The results demonstrated that both acidosis (decreased HCO3) and hypermagnesemia inhibited periosteal bone formation, and, when combined, results were summative; and the previously observed in vitro role of HCO3- and Mg2+ as inhibitors of crystal growth were confirmed in vivo. XRD measurements demonstrated that decreased plasma HCO3 resulted in larger crystals and increased Mg resulted in smaller crystals. However, the combined XRD effects of acidosis and hypermagnesemia resembled acidosis alone. It is postulated that the final composition and crystal structure of bone are strongly influenced by HCO3- and Mg2+, and the effects are mediated by the combined influence on both osteoblastic bone formation and the growth of hydroxyapatite.

scholarly journals ELECTRON MICROSCOPY OF PLASMA-CELL TUMORS OF THE MOUSE

1961 ◽  
Vol 9 (2) ◽  
pp. 369-381 ◽  
Author(s):  
D. F. Parsons ◽  
M. A. Bender ◽  
E. B. Darden ◽  
Guthrie T. Pratt ◽  
D. L. Lindsley
Keyword(s):  
Electron Microscopy ◽  
Tissue Culture ◽  
Complex Structure ◽  
Granular Body ◽  
Virus Particles ◽  
Culture Cells ◽  
Large Numbers ◽  
Tumor Agent

The X5563 tumor has been grown in tissue culture. Cells similar to those of the original tumor migrated from the explant and attached to the glass walls of the culture vessels. Electron microscopy showed that large numbers of particles, similar in morphology to virus particles, were associated with these cells after 7 days of culture. The two principal types of particles found in the tumor in vivo appear to be present in vitro. Many more of these particles, however, were larger and showed a more complex structure. Whereas the particles were mainly localized inside endoplasmic reticulum or the Golgi zone in the tumors in vivo, in the tissue culture the majority of the particles were associated with the plasma membrane and were found outside of the cells. The relation of the particles to the granular body is discussed as well as a possible relation to the mammary tumor agent.

scholarly journals Human Islet Amyloid Polypeptide Fibril Binding to Catalase: A Transmission Electron Microscopy and Microplate Study

2010 ◽  
Vol 10 ◽  
pp. 879-893 ◽  
Author(s):  
Nathaniel G. N. Milton ◽  
J. Robin Harris
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Islet Amyloid Polypeptide ◽  
Amyloid Β ◽  
Human Islet ◽  
Islet Amyloid ◽  
Human Islet Amyloid Polypeptide ◽  
Transmission Electron

The diabetes-associated human islet amyloid polypeptide (IAPP) is a 37-amino-acid peptide that forms fibrilsin vitroandin vivo. Human IAPP fibrils are toxic in a similar manner to Alzheimer's amyloid-β (Aβ) and prion protein (PrP) fibrils. Previous studies have shown that catalase binds to Aβ fibrils and appears to recognize a region containing the Gly-Ala-Ile-Ile sequence that is similar to the Gly-Ala-Ile-Leu sequence found in human IAPP residues 24-27. This study presents a transmission electron microscopy (TEM)—based analysis of fibril formation and the binding of human erythrocyte catalase to IAPP fibrils. The results show that human IAPP 1-37, 8-37, and 20-29 peptides form fibrils with diverse and polymorphic structures. All three forms of IAPP bound catalase, and complexes of IAPP 1-37 or 8-37 with catalase were identified by immunoassay. The binding of biotinylated IAPP to catalase was high affinity with a KDof 0.77nM, and could be inhibited by either human or rat IAPP 1-37 and 8-37 forms. Fibrils formed by the PrP 118-135 peptide with a Gly-Ala-Val-Val sequence also bound catalase. These results suggest that catalase recognizes a Gly-Ala-Ile-Leu—like sequence in amyloid fibril-forming peptides. For IAPP 1-37 and 8-37, the catalase binding was primarily directed towards fibrillar rather than ribbon-like structures, suggesting differences in the accessibility of the human IAPP 24-27 Gly-Ala-Ile-Leu region. This suggests that catalase may be able to discriminate between different structural forms of IAPP fibrils. The ability of catalase to bind IAPP, Aβ, and PrP fibrils demonstrates the presence of similar accessible structural motifs that may be targets for antiamyloid therapeutic development.

Corrosive behaviour of Amplatzer® devices in experimental and biological environments

2002 ◽  
Vol 12 (3) ◽  
pp. 260-265 ◽  
Author(s):  
Huafu Kong ◽  
James L. Wilkinson ◽  
James Y. Coe ◽  
Xiaoping Gu ◽  
Myra Urness ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Oxide Layer ◽  
Titanium Oxide ◽  
Saline Solution ◽  
Nickel Titanium ◽  
Cardiac Transplant ◽  
Titanium Oxide Layer ◽  
Device Placement

Purpose: Nitinol, a nickel-titanium alloy, is a valuable material in the construction of interventional endoluminal devices because of its biocompatibility, super elasticity, high resiliency and shape memory. The possibility of nickel toxicity has been raised with devices constructed of Nitinol. Our investigation examines the long-term corrosive behavior of this alloy in experimental and biological environments. Methods: We performed three levels of study. Microscopic examination was made of 64 devices of various sizes, randomly selected from 240 Amplatzer® Septal Occluders that had been exposed to saline solution at 37°C for fourteen months. All samples were studied by electron microscopy ranging from 50 to 5000 times magnification. We also studied microscopically 3 Amplatzer® devices explanted 18–36 months after implantation in dogs, and 2 Amplatzer Septal Occluders removed from patients 18 months (cardiac transplant) and 19 months (died of causes unrelated to device placement) after implantation, which were examined grossly and by electron microscopy up to 5000 times magnification. We then measured the levels of nickel in the blood using inductive plasma mass spectroscopy in 19 patients with implanted Amplatzer® devices, making measurements before and 6 months after implantation. Results: Electron microscopy showed an intact titanium oxide layer with no evidence of corrosion in vitro and in vivo. One explanted device in direct contact with the platinum leads of a pacemaker for eighteen months showed minor pitting of the titanium oxide layer believed to be galvanic in nature. No wire fractures were found in vitro after cycle testing with 400 million cycles, nor in devices taken from the animals and humans. Biochemical studies showed no significant elevation of levels of nickel levels after implantation. Conclusion: Nitinol wire of Amplatzer® septal occlusion devices is resistant to corrosion when exposed to physiologic saline solution, and in experimental animals as well as humans. A device in contact with a platinum pacemaker electrode developed minimal pitting of the titanium oxide layer, believed to be galvanic in nature and of no structural or clinical significance. There is no increase of concentrations of nickel in the blood of patients who have received Amplatzer® nitinol devices. These favorable testing results reveal that nickel-titanium is an inert, corrosion resistant alloy.

scholarly journals Development of an Oxcarbazepine Solid Dispersion Using Skimmed Milk to Improve the Solubility and Dissolution Profile

2019 ◽  
Vol 11 (05) ◽  
Author(s):  
M. Shah ◽  
D. Patel
Keyword(s):  
Electron Microscopy ◽  
Solid Dispersion ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Infra Red ◽  
Crystalline Nature ◽  
Skimmed Milk ◽  
Scanning Electron

Oxcarbazepine has low solubility and low oral bioavailability, so it’s a challenge to formulate suitable dosage form. In this present investigation, to improve the dissolution rate and solubility, skimmed milk is used as a carrier. Physical mixers were prepared using various drugs to carrier ratio and spray drying technology was used to develop solid dispersion with the carrier. Various techniques were used to characterize the solid dispersion immediately after they were made which includes differential scanning calorimetry, scanning electron microscopy, fourier transform infra- red spectroscopy, X-ray diffraction and in-vitro dissolution profiles. The differential scanning calorimetry thermograms of raw drug indicated of its anhydrous crystalline nature. In thermograms of solid dispersion, the characteristic peak was absent suggesting the change from crystalline nature to amorphous form. X-ray diffraction confirmed those results. X-ray diffraction results of raw drug showed highly intense peak characteristic of its crystalline nature where solid dispersion showed less intense, more diffused peak indicating the change in crystalline form. Fourier transforms infra-red spectroscopy studies showed there was no interaction between drug and carrier. Scanning electron microscopy support the amorphous nature of mixer. The whole formulation showed distinct enhancement in the drug release behavior and solubility. The optimum oxcarbazepine to skimmed milk ratio 1:3 enhances the in-vitro drug release by 3.5 fold and also show distinct increase in solubility. It was concluded that for improvement of solubility of poorly water soluble oxcarbazepine, skimmed milk powder as a carrier can be utilize very well.

Sign in / Sign up

Export Citation Format

Share Document