scholarly journals A Correlative Analysis of Actin Filament Assembly, Structure, and Dynamics

1997 ◽  
Vol 138 (3) ◽  
pp. 559-574 ◽  
Author(s):  
Michel O. Steinmetz ◽  
Kenneth N. Goldie ◽  
Ueli Aebi
Keyword(s):  
Actin Filament ◽  
Divalent Cation ◽  
Actin Filaments ◽  
Metal Ion ◽  
Cation Binding ◽  
Polymerization Reaction ◽  
Structure And Dynamics ◽  
Filament Assembly ◽  
Cation Binding Site ◽  
Assembly Structure

The effect of the type of metal ion (i.e., Ca2+, Mg2+, or none) bound to the high-affinity divalent cation binding site (HAS) of actin on filament assembly, structure, and dynamics was investigated in the absence and presence of the mushroom toxin phalloidin. In agreement with earlier reports, we found the polymerization reaction of G-actin into F-actin filaments to be tightly controlled by the type of divalent cation residing in its HAS. Moreover, novel polymerization data are presented indicating that LD, a dimer unproductive by itself, does incorporate into growing F-actin filaments. This observation suggests that during actin filament formation, in addition to the obligatory nucleation– condensation pathway involving UD, a productive filament dimer, a facultative, LD-based pathway is implicated whose abundance strongly depends on the exact polymerization conditions chosen. The “ragged” and “branched” filaments observed during the early stages of assembly represent a hallmark of LD incorporation and might be key to producing an actin meshwork capable of rapidly assembling and disassembling in highly motile cells. Hence, LD incorporation into growing actin filaments might provide an additional level of regulation of actin cytoskeleton dynamics. Regarding the structure and mechanical properties of the F-actin filament at steady state, no significant correlation with the divalent cation residing in its HAS was found. However, compared to native filaments, phalloidin-stabilized filaments were stiffer and yielded subtle but significant structural changes. Together, our data indicate that whereas the G-actin conformation is tightly controlled by the divalent cation in its HAS, the F-actin conformation appears more robust than this variation. Hence, we conclude that the structure and dynamics of the Mg–F-actin moiety within the thin filament are not significantly modulated by the cyclic Ca2+ release as it occurs in muscle contraction to regulate the actomyosin interaction via troponin.

scholarly journals Myopathy-Sensitive G-Actin Segment 227-235 Is Involved in Salt-Induced Stabilization of Contacts within the Actin Filament

2021 ◽  
Vol 22 (5) ◽  
pp. 2327
Author(s):  
Joanna Gruszczynska-Biegala ◽  
Andrzej Stefan ◽  
Andrzej A. Kasprzak ◽  
Piotr Dobryszycki ◽  
Sofia Khaitlina ◽  
...  
Keyword(s):  
Ionic Strength ◽  
Actin Filament ◽  
Actin Filaments ◽  
Dynamic Properties ◽  
Cation Binding ◽  
Subunit Exchange ◽  
High Affinity ◽  
Cation Binding Site ◽  
D Loop ◽  
Α Helix

Formation of stable actin filaments, critically important for actin functions, is determined by the ionic strength of the solution. However, not much is known about the elements of the actin fold involved in ionic-strength-dependent filament stabilization. In this work, F-actin was destabilized by Cu2+ binding to Cys374, and the effects of solvent conditions on the dynamic properties of F-actin were correlated with the involvement of Segment 227-235 in filament stabilization. The results of our work show that the presence of Mg2+ at the high-affinity cation binding site of Cu-modified actin polymerized with MgCl2 strongly enhances the rate of filament subunit exchange and promotes the filament instability. In the presence of 0.1 M KCl, the filament subunit exchange was 2–3-fold lower than that in the MgCl2-polymerized F-actin. This effect correlates with the reduced accessibility of the D-loop and Segment 227-235 on opposite filament strands, consistent with an ionic-strength-dependent conformational change that modulates involvement of Segment 227-235 in stabilization of the intermonomer interface. KCl may restrict the mobility of the α-helix encompassing part of Segment 227-235 and/or be bound to Asp236 at the boundary of Segment 227-235. These results provide experimental evidence for the involvement of Segment 227-235 in salt-induced stabilization of contacts within the actin filament and suggest that they can be weakened by mutations characteristic of actin-associated myopathies.

scholarly journals Mechanism of synergistic actin filament pointed end depolymerization by cyclase-associated protein and cofilin

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Tommi Kotila ◽  
Hugo Wioland ◽  
Giray Enkavi ◽  
Konstantin Kogan ◽  
Ilpo Vattulainen ◽  
...  
Keyword(s):  
Molecular Mechanism ◽  
Actin Filament ◽  
Actin Filaments ◽  
Monomeric Form ◽  
Actin Monomer ◽  
Filament Assembly ◽  
Structural Work ◽  
Cytoskeletal Dynamics ◽  
Pointed End ◽  
Dependent Processes

AbstractThe ability of cells to generate forces through actin filament turnover was an early adaptation in evolution. While much is known about how actin filaments grow, mechanisms of their disassembly are incompletely understood. The best-characterized actin disassembly factors are the cofilin family proteins, which increase cytoskeletal dynamics by severing actin filaments. However, the mechanism by which severed actin filaments are recycled back to monomeric form has remained enigmatic. We report that cyclase-associated-protein (CAP) works in synergy with cofilin to accelerate actin filament depolymerization by nearly 100-fold. Structural work uncovers the molecular mechanism by which CAP interacts with actin filament pointed end to destabilize the interface between terminal actin subunits, and subsequently recycles the newly-depolymerized actin monomer for the next round of filament assembly. These findings establish CAP as a molecular machine promoting rapid actin filament depolymerization and monomer recycling, and explain why CAP is critical for actin-dependent processes in all eukaryotes.

scholarly journals Chemical properties of the divalent cation binding site on potassium channels.

1992 ◽  
Vol 100 (2) ◽  
pp. 181-193 ◽  
Author(s):  
S Spires ◽  
T Begenisich
Keyword(s):  
Potassium Channels ◽  
Binding Site ◽  
Divalent Cation ◽  
Divalent Cations ◽  
Chemical Properties ◽  
Cation Binding ◽  
Solution Ph ◽  
Electrophysiological Properties ◽  
Cation Binding Site ◽  
Voltage Gated Ion Channels

The actions of divalent cations on voltage-gated ion channels suggest that these cations bind to specific sites and directly influence gating kinetics. We have examined some chemical properties of the external divalent cation binding sites on neuronal potassium channels. Patch clamp techniques were used to measure the electrophysiological properties of these channels and Zn ions were used to probe the divalent cation binding site. The channel activation kinetics were greatly (three- to fourfold) slowed by low (2-5 mM) concentrations of Zn; deactivation kinetics were only slightly affected. These effects of Zn were inhibited by low solution pH in a manner consistent with competition between Zn and H ions for a single site. The apparent inhibitory pK for this site was near 7.2. Treatment of the neurons with specific amino acid reagents implicated amino, but no histidyl or sulfhydryl, residues in divalent cation binding.

scholarly journals Inhibition of CapZ during myofibrillogenesis alters assembly of actin filaments.

1995 ◽  
Vol 128 (1) ◽  
pp. 61-70 ◽  
Author(s):  
D A Schafer ◽  
C Hug ◽  
J A Cooper
Keyword(s):  
Monoclonal Antibody ◽  
Actin Filament ◽  
Actin Filaments ◽  
Binding Activity ◽  
Actin Binding ◽  
Mutant Form ◽  
Actin Binding Protein ◽  
Filament Assembly ◽  
Skeletal Myotubes ◽  
Aligned Array

The actin filaments of myofibrils are highly organized; they are of a uniform length and polarity and are situated in the sarcomere in an aligned array. We hypothesized that the barbed-end actin-binding protein, CapZ, directs the process of actin filament assembly during myofibrillogenesis. We tested this hypothesis by inhibiting the actin-binding activity of CapZ in developing myotubes in culture using two different methods. First, injection of a monoclonal antibody that prevents the interaction of CapZ and actin disrupts the non-striated bundles of actin filaments formed during the early stages of myofibril formation in skeletal myotubes in culture. The antibody, when injected at concentrations lower than that required for disrupting the actin filaments, binds at nascent Z-disks. Since the interaction of CapZ and the monoclonal antibody are mutually exclusive, this result indicates that CapZ binds nascent Z-disks independent of an interaction with actin filaments. In a second approach, expression in myotubes of a mutant form of CapZ that does not bind actin results in a delay in the appearance of actin in a striated pattern in myofibrils. The organization of alpha-actinin at Z-disks also is delayed, but the organization of titin and myosin in sarcomeres is not significantly altered. We conclude that the interaction of CapZ and actin is important for the organization of actin filaments of the sarcomere.

scholarly journals Actin filaments function as a tension sensor by tension-dependent binding of cofilin to the filament

2011 ◽  
Vol 195 (5) ◽  
pp. 721-727 ◽  
Author(s):  
Kimihide Hayakawa ◽  
Hitoshi Tatsumi ◽  
Masahiro Sokabe
Keyword(s):  
Actin Cytoskeleton ◽  
Optical Tweezers ◽  
Actin Filament ◽  
Actin Filaments ◽  
Stress Fiber ◽  
Mechanical Forces ◽  
Actin Bundle ◽  
Structure And Dynamics ◽  
Binding Rate ◽  
Tension Sensor

Intracellular and extracellular mechanical forces affect the structure and dynamics of the actin cytoskeleton. However, the underlying molecular and biophysical mechanisms, including how mechanical forces are sensed, are largely unknown. Actin-depolymerizing factor/cofilin proteins are actin-modulating proteins that are ubiquitously distributed in eukaryotes, and they are the most likely candidate as proteins to drive stress fiber disassembly in response to changes in tension in the fiber. In this study, we propose a novel hypothesis that tension in an actin filament prevents the filament from being severed by cofilin. To test this, we placed single actin filaments under tension using optical tweezers. When a fiber was tensed, it was severed after the application of cofilin with a significantly larger delay in comparison with control filaments suspended in solution. The binding rate of cofilin to an actin bundle decreased when the bundle was tensed. These results suggest that tension in an actin filament reduces the cofilin binding, resulting in a decrease in its effective severing activity.

scholarly journals Identification of critical functional and regulatory domains in gelsolin.

1989 ◽  
Vol 108 (5) ◽  
pp. 1717-1726 ◽  
Author(s):  
D J Kwiatkowski ◽  
P A Janmey ◽  
H L Yin
Keyword(s):  
Actin Filament ◽  
Binding Sites ◽  
Actin Filaments ◽  
Dna Transfection ◽  
Plasma Gelsolin ◽  
Cos Cells ◽  
Regulatory Domains ◽  
Filament Assembly ◽  
Potential Binding ◽  
Major Loss

Gelsolin can sever actin filaments, nucleate actin filament assembly, and cap the fast-growing end of actin filaments. These functions are activated by Ca2+ and inhibited by polyphosphoinositides (PPI). We report here studies designed to delineate critical domains within gelsolin by deletional mutagenesis, using COS cells to secrete truncated plasma gelsolin after DNA transfection. Deletion of 11% of gelsolin from the COOH terminus resulted in a major loss of its ability to promote the nucleation step in actin filament assembly, suggesting that a COOH-terminal domain is important in this function. In contrast, derivatives with deletion of 79% of the gelsolin sequence exhibited normal PPI-regulated actin filament-severing activity. Combined with previous results using proteolytic fragments, we deduce that an 11-amino acid sequence in the COOH terminus of the smallest severing gelsolin derivative identified here mediates PPI-regulated binding of gelsolin to the sides of actin filaments before severing. Deletion of only 3% of gelsolin at the COOH terminus, including a dicarboxylic acid sequence similar to that found on the NH2 terminus of actin, resulted in a loss of Ca2+-requirement for filament severing and monomer binding. Since these residues in actin have been implicated as potential binding sites for gelsolin, our results raise the possibility that the analogous sequence at the COOH terminus of gelsolin may act as a Ca2+-regulated pseudosubstrate. However, derivatives with deletion of 69-79% of the COOH-terminal residues of gelsolin exhibited normal Ca2+ regulation of severing activity, establishing the intrinsic Ca2+ regulation of the NH2-terminal region. One or both mechanisms of Ca2+ regulation may occur in members of the gelsolin family of actin-severing proteins.

Sign in / Sign up

Export Citation Format

Share Document