scholarly journals Inhibition of CapZ during myofibrillogenesis alters assembly of actin filaments.

1995 ◽  
Vol 128 (1) ◽  
pp. 61-70 ◽  
Author(s):  
D A Schafer ◽  
C Hug ◽  
J A Cooper
Keyword(s):  
Monoclonal Antibody ◽  
Actin Filament ◽  
Actin Filaments ◽  
Binding Activity ◽  
Actin Binding ◽  
Mutant Form ◽  
Actin Binding Protein ◽  
Filament Assembly ◽  
Skeletal Myotubes ◽  
Aligned Array

The actin filaments of myofibrils are highly organized; they are of a uniform length and polarity and are situated in the sarcomere in an aligned array. We hypothesized that the barbed-end actin-binding protein, CapZ, directs the process of actin filament assembly during myofibrillogenesis. We tested this hypothesis by inhibiting the actin-binding activity of CapZ in developing myotubes in culture using two different methods. First, injection of a monoclonal antibody that prevents the interaction of CapZ and actin disrupts the non-striated bundles of actin filaments formed during the early stages of myofibril formation in skeletal myotubes in culture. The antibody, when injected at concentrations lower than that required for disrupting the actin filaments, binds at nascent Z-disks. Since the interaction of CapZ and the monoclonal antibody are mutually exclusive, this result indicates that CapZ binds nascent Z-disks independent of an interaction with actin filaments. In a second approach, expression in myotubes of a mutant form of CapZ that does not bind actin results in a delay in the appearance of actin in a striated pattern in myofibrils. The organization of alpha-actinin at Z-disks also is delayed, but the organization of titin and myosin in sarcomeres is not significantly altered. We conclude that the interaction of CapZ and actin is important for the organization of actin filaments of the sarcomere.

scholarly journals Twinfilin, a molecular mailman for actin monomers

2002 ◽  
Vol 115 (5) ◽  
pp. 881-886 ◽  
Author(s):  
Sandra Palmgren ◽  
Maria Vartiainen ◽  
Pekka Lappalainen
Keyword(s):  
Drosophila Melanogaster ◽  
Actin Filament ◽  
Binding Sites ◽  
Actin Filaments ◽  
Actin Binding ◽  
Actin Monomer ◽  
Nucleotide Exchange ◽  
Capping Protein ◽  
Filament Assembly

Twinfilin is a ubiquitous actin-monomer-binding protein that is composed of two ADF-homology domains. It forms a 1:1 complex with ADP-actin-monomers,inhibits nucleotide exchange on actin monomers and prevents assembly of the monomer into filaments. The two ADF-H domains in twinfilin probably have 3D structures similar to those of the ADF/cofilin proteins and overlapping actin-binding sites. Twinfilin also interacts with PtdIns(4,5)P2, which inhibits its actin-monomer-sequestering activity in vitro. Mutations in the twinfilin gene result in defects in the bipolar budding pattern in S. cerevisiae and in a rough eye phenotype and aberrant bristle morphology in Drosophila melanogaster. These phenotypes are caused by the uncontrolled polymerization of actin filaments in the absence of twinfilin. Studies on budding yeast suggest that twinfilin contributes to actin filament turnover by localizing actin monomers, in their `inactive'ADP-form, to the sites of rapid filament assembly. This is mediated through direct interactions between twinfilin and capping protein. Therefore,twinfilin might serve as a link between rapid actin filament depolymerization and assembly in cells.

scholarly journals Actin filaments in yeast are unstable in the absence of capping protein or fimbrin.

1995 ◽  
Vol 131 (6) ◽  
pp. 1483-1493 ◽  
Author(s):  
T S Karpova ◽  
K Tatchell ◽  
J A Cooper
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Actin Filament ◽  
Actin Filaments ◽  
Binding Proteins ◽  
Actin Binding ◽  
Actin Binding Proteins ◽  
Capping Protein ◽  
Filament Assembly

Many actin-binding proteins affect filament assembly in vitro and localize with actin in vivo, but how their molecular actions contribute to filament assembly in vivo is not understood well. We report here that capping protein (CP) and fimbrin are both important for actin filament assembly in vivo in Saccharomyces cerevisiae, based on finding decreased actin filament assembly in CP and fimbrin mutants. We have also identified mutations in actin that enhance the CP phenotype and find that those mutants also have decreased actin filament assembly in vivo. In vitro, actin purified from some of these mutants is defective in polymerization or binding fimbrin. These findings support the conclusion that CP acts to stabilize actin filaments in vivo. This conclusion is particularly remarkable because it is the opposite of the conclusion drawn from recent studies in Dictyostelium (Hug, C., P.Y. Jay, I. Reddy, J.G. McNally, P.C. Bridgman, E.L. Elson, and J.A. Cooper. 1995. Cell. 81:591-600). In addition, we find that the unpolymerized pool of actin in yeast is very small relative to that found in higher cells, which suggests that actin filament assembly is less dynamic in yeast than higher cells.

Binding of Human Platelet Glycoprotein lb and Actin to Fragments of Actin-Binding Protein

1992 ◽  
Vol 67 (02) ◽  
pp. 252-257 ◽  
Author(s):  
Anne M Aakhus ◽  
J Michael Wilkinson ◽  
Nils Olav Solum
Keyword(s):  
Actin Filaments ◽  
High Speed ◽  
Binding Protein ◽  
Protein A ◽  
Actin Binding ◽  
Platelet Glycoprotein ◽  
Actin Binding Protein ◽  
Crossed Immunoelectrophoresis ◽  
Triton X ◽  
Calpain Inhibitors

SummaryActin-binding protein (ABP) is degraded into fragments of 190 and 90 kDa by calpain. A monoclonal antibody (MAb TI10) against the 90 kDa fragment of ABP coprecipitated with the glycoprotein lb (GP lb) peak observed on crossed immunoelectrophoresis of Triton X-100 extracts of platelets prepared without calpain inhibitors. MAb PM6/317 against the 190 kDa fragment was not coprecipitated with the GP lb peak under such conditions. The 90 kDa fragment was adsorbed on protein A agarose from extracts that had been preincubated with antibodies to GP lb. This supports the idea that the GP Ib-ABP interaction resides in the 90 kDa region of ABP. GP lb was sedimented with the Triton-insoluble actin filaments in trace amounts only, and only after high speed centrifugation (100,000 × g, 3 h). Both the 190 kDa and the 90 kDa fragments of ABP were sedimented with the Triton-insoluble actin filaments.

scholarly journals Actin-binding protein promotes the bipolar and perpendicular branching of actin filaments.

1980 ◽  
Vol 87 (3) ◽  
pp. 841-848 ◽  
Author(s):  
J H Hartwig ◽  
J Tyler ◽  
T P Stossel
Keyword(s):  
Actin Filaments ◽  
Actin Polymerization ◽  
Average Length ◽  
Binding Protein ◽  
Actin Binding ◽  
Branch Points ◽  
Heavy Meromyosin ◽  
Actin Binding Protein ◽  
Protein Dimers ◽  
Protein Molecules

Branching filaments with striking perpendicularity form when actin polymerizes in the presence of macrophage actin-binding protein. Actin-binding protein molecules are visible at the branch points. Compared with actin polymerized in the absence of actin-binding proteins, not only do the filaments branch but the average length of the actin filaments decreases from 3.2 to 0.63 micrometer. Arrowhead complexes formed by addition of heavy meromyosin molecules to the branching actin filaments point toward the branch points. Actin-binding protein also accelerates the onset of actin polymerization. All of these findings show that actin filaments assemble from nucleating sites on actin-binding protein dimers. A branching polymerization of actin filaments from a preexisting lattice of actin filaments joined by actin-binding protein molecules could generate expansion of cortical cytoplasm in amoeboid cells.

scholarly journals αE-catenin actin-binding domain alters actin filament conformation and regulates binding of nucleation and disassembly factors

2013 ◽  
Vol 24 (23) ◽  
pp. 3710-3720 ◽  
Author(s):  
Scott D. Hansen ◽  
Adam V. Kwiatkowski ◽  
Chung-Yueh Ouyang ◽  
HongJun Liu ◽  
Sabine Pokutta ◽  
...  
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Binding Domain ◽  
Actin Binding ◽  
Filamentous Actin ◽  
Filament Structure ◽  
Actin Binding Domain ◽  
Filament Bundles ◽  
Underlying Mechanisms ◽  
Cell Cell

The actin-binding protein αE-catenin may contribute to transitions between cell migration and cell–cell adhesion that depend on remodeling the actin cytoskeleton, but the underlying mechanisms are unknown. We show that the αE-catenin actin-binding domain (ABD) binds cooperatively to individual actin filaments and that binding is accompanied by a conformational change in the actin protomer that affects filament structure. αE-catenin ABD binding limits barbed-end growth, especially in actin filament bundles. αE-catenin ABD inhibits actin filament branching by the Arp2/3 complex and severing by cofilin, both of which contact regions of the actin protomer that are structurally altered by αE-catenin ABD binding. In epithelial cells, there is little correlation between the distribution of αE-catenin and the Arp2/3 complex at developing cell–cell contacts. Our results indicate that αE-catenin binding to filamentous actin favors assembly of unbranched filament bundles that are protected from severing over more dynamic, branched filament arrays.

Actin filaments regulate epithelial Na+ channel activity

1991 ◽  
Vol 261 (5) ◽  
pp. C882-C888 ◽  
Author(s):  
H. F. Cantiello ◽  
J. L. Stow ◽  
A. G. Prat ◽  
D. A. Ausiello
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Functional Role ◽  
Cytochalasin D ◽  
Actin Binding ◽  
Na Channel ◽  
Na Channels ◽  
Channel Activity ◽  
Cortical Actin ◽  
Excised Patches

The functional role of the cytoskeleton in the control of ion channel activity is unknown. In the present study, immunocolocalization of Na+ channels with specific antibodies and fluorescein isothiocyanate-phalloidin to stain the cortical cytoskeleton indicates that actin is always present in close proximity to apical Na+ channels in A6 cells. The patch-clamp technique was used to assess the effect of cortical actin networks on apical Na+ channels in these A6 epithelial cells. The actin filament disrupter, cytochalasin D (5 micrograms/ml), induced Na+ channel activity in cell-attached patches within 5 min of addition. Cytochalasin D also induced and/or increased Na+ channel activity in 90% of excised patches tested within 2 min. Addition of short actin filaments (greater than 5 microM) to excised patches also induced channel activity. This effect was enhanced by addition of ATP and/or cytochalasin D. The effect of actin on Na+ channel activity was reversed by addition of the G actin-binding protein DNase I or completely prevented by treatment of the excised patches with this enzyme. Addition of the actin-binding protein, filamin, reversibly inhibited both spontaneous and actin-induced Na+ channels. Thus actin filament networks, achieved by either depolymerizing endogenous actin filaments by treatment with cytochalasin D, the addition of exogenous short actin filaments plus ATP, or actin plus cytochalasin D, regulate apical Na+ channel activity. This conclusion was supported by the observation that the addition of short actin filaments in the form of actin-gelsolin complexes in molar ratios less than 8:1 was also effective in activating Na+ channels. We have thus demonstrated a functional role for the cortical actin network in the regulation of epithelial Na+ channels that may complement a structural role for membrane protein targetting and assembly.

scholarly journals Myosin and gelsolin cooperate in actin filament severing and actomyosin motor activity

2020 ◽  
pp. jbc.RA120.015863
Author(s):  
Venukumar Vemula ◽  
Tamás Huber ◽  
Marko Ušaj ◽  
Beáta Bugyi ◽  
Alf Mansson
Keyword(s):  
Motor Activity ◽  
Actin Filament ◽  
Single Molecule ◽  
Actin Filaments ◽  
Actin Binding ◽  
In Vitro Motility Assay ◽  
Cooperative Effects ◽  
Myosin Motor ◽  
Filament Dynamics

Actin is a major intracellular protein with key functions in cellular motility, signaling and structural rearrangements. Its dynamic behavior, such as polymerisation and depolymerisation of actin filaments in response to intra- and extracellular cues, is regulated by an abundance of actin binding proteins. Out of these, gelsolin is one of the most potent for filament severing. However, myosin motor activity also fragments actin filaments through motor induced forces, suggesting that these two proteins could cooperate to regulate filament dynamics and motility. To test this idea, we used an in vitro motility assay, where actin filaments are propelled by surface-adsorbed heavy meromyosin (HMM) motor fragments. This allows studies of both motility and filament dynamics using isolated proteins. Gelsolin, at both nanomolar and micromolar Ca2+ concentration, appreciably enhanced actin filament severing caused by HMM-induced forces at 1 mM MgATP, an effect that was increased at higher HMM motor density. This finding is consistent with cooperativity between actin filament severing by myosin-induced forces and by gelsolin. We also observed reduced sliding velocity of the HMM-propelled filaments in the presence of gelsolin, providing further support of myosin-gelsolin cooperativity. Total internal reflection fluorescence microscopy based single molecule studies corroborated that the velocity reduction was a direct effect of gelsolin-binding to the filament and revealed different filament severing pattern of stationary and HMM propelled filaments. Overall, the results corroborate cooperative effects between gelsolin-induced alterations in the actin filaments and changes due to myosin motor activity leading to enhanced F-actin severing of possible physiological relevance.

scholarly journals Dynamics of Tpm1.8 domains on actin filaments with single molecule resolution

2020 ◽  
Author(s):  
Ilina Bareja ◽  
Hugo Wioland ◽  
Miro Janco ◽  
Philip R. Nicovich ◽  
Antoine Jégou ◽  
...  
Keyword(s):  
Actin Filament ◽  
Single Molecule ◽  
Actin Filaments ◽  
High Probability ◽  
Actin Binding ◽  
Single Molecule Level ◽  
Filament Dynamics ◽  
Kinetics Of ◽  
Insight Into

ABSTRACTTropomyosins regulate dynamics and functions of the actin cytoskeleton by forming long chains along the two strands of actin filaments that act as gatekeepers for the binding of other actin-binding proteins. The fundamental molecular interactions underlying the binding of tropomyosin to actin are still poorly understood. Using microfluidics and fluorescence microscopy, we observed the binding of fluorescently labelled tropomyosin isoform Tpm1.8 to unlabelled actin filaments in real time. This approach in conjunction with mathematical modeling enabled us to quantify the nucleation, assembly and disassembly kinetics of Tpm1.8 on single filaments and at the single molecule level. Our analysis suggests that Tpm1.8 decorates the two strands of the actin filament independently. Nucleation of a growing tropomyosin domain proceeds with high probability as soon as the first Tpm1.8 molecule is stabilised by the addition of a second molecule, ultimately leading to full decoration of the actin filament. In addition, Tpm1.8 domains are asymmetrical, with enhanced dynamics at the edge oriented towards the barbed end of the actin filament. The complete description of Tpm1.8 kinetics on actin filaments presented here provides molecular insight into actin-tropomyosin filament formation and the role of tropomyosins in regulating actin filament dynamics.

scholarly journals Three-dimensional structure of actin filaments and of an actin gel made with actin-binding protein.

1983 ◽  
Vol 96 (5) ◽  
pp. 1400-1413 ◽  
Author(s):  
R Niederman ◽  
P C Amrein ◽  
J Hartwig
Keyword(s):  
Actin Filaments ◽  
Binding Protein ◽  
Three Dimensional ◽  
Actin Binding ◽  
Dimensional Structure ◽  
Molar Ratio ◽  
Computer Assisted ◽  
Three Dimensional Structure ◽  
Actin Binding Protein ◽  
Critical Point Drying

Purified muscle actin and mixtures of actin and actin-binding protein were examined in the transmission electron microscope after fixation, critical point drying, and rotary shadowing. The three-dimensional structure of the protein assemblies was analyzed by a computer-assisted graphic analysis applicable to generalized filament networks. This analysis yielded information concerning the frequency of filament intersections, the filament length between these intersections, the angle at which filaments branch at these intersections, and the concentration of filaments within a defined volume. Purified actin at a concentration of 1 mg/ml assembled into a uniform mass of long filaments which overlap at random angles between 0 degrees and 90 degrees. Actin in the presence of macrophage actin-binding protein assembled into short, straight filaments, organized in a perpendicular branching network. The distance between branch points was inversely related to the molar ratio of actin-binding protein to actin. This distance was what would be predicted if actin filaments grew at right angles off of nucleation sites on the two ends of actin-binding protein dimers, and then annealed. The results suggest that actin in combination with actin-binding protein self-assembles to form a three-dimensional network resembling the peripheral cytoskeleton of motile cells.

Sign in / Sign up

Export Citation Format

Share Document