Full-order sliding mode control of uncertain chaos in a permanent magnet synchronous motor based on a fuzzy extended state observer

2015 ◽  
Vol 24 (11) ◽  
pp. 110504 ◽  
Author(s):  
Qiang Chen ◽  
Yu-Rong Nan ◽  
Heng-Huo Zheng ◽  
Xue-Mei Ren
2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
Peipei Xia ◽  
Yongting Deng ◽  
Zhiqian Wang ◽  
Hongwen Li

The sliding mode control (SMC) strategy is employed to a permanent magnet synchronous motor (PMSM) vector control system in this study to improve system robustness against parameter variations and load disturbance. To decrease the intrinsic chattering behavior of SMC, a speed SMC with an adaptive law and an extended state observer (ESO) is proposed. In this method, based on the Lyapunov stability theorem, adaptive estimation laws are deduced to estimate uncertainties of a PMSM caused by parameter variations and unmodeled dynamics. Online estimated uncertainties can be used to eliminate the effect caused by the real uncertainties. In addition, an ESO is applied to observe the load disturbance in real time. The load disturbance observed value is then utilized to the output side of the speed adaptive SMC controller as feed-forward compensation. Both the simulation and experiment results demonstrate that the proposed approach effectively alleviates system chattering and enhances system robustness against uncertainty and load disturbance.


Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 922
Author(s):  
Peng Gao ◽  
Guangming Zhang ◽  
Xiaodong Lv

This paper proposes a novel model-free super-twisting nonlinear sliding mode control (MFSTNLSMC) strategy with an improved smoothing extended state observer (SESO) for permanent magnet synchronous motor (PMSM) drives. First of all, the improved SESO is introduced to estimate the unknown term of the PMSM ultra-local model. Secondly, a novel nonlinear sliding mode surface (NLSMS) is designed, which can effectively overcome the disadvantages of simple and rough signal processing of the conventional linear sliding mode surface. At the same time, a super-twisting (ST) structure is chosen to suppress the chattering phenomenon and improve system robustness. Then, the Lyapunov stability theorem is used to prove the stability of the proposed control algorithm. Finally, both comparative simulations and experimental demonstrations verify the excellent speed tracking performance and robustness of the proposed control strategy.


2021 ◽  
Vol 18 (1) ◽  
pp. 172988142098603
Author(s):  
Daoxiong Gong ◽  
Mengyao Pei ◽  
Rui He ◽  
Jianjun Yu

Pneumatic artificial muscles (PAMs) are expected to play an important role in endowing the advanced robot with the compliant manipulation, which is very important for a robot to coexist and cooperate with humans. However, the strong nonlinear characteristics of PAMs hinder its wide application in robots, and therefore, advanced control algorithms are urgently needed for making the best use of the advantages and bypassing the disadvantages of PAMs. In this article, we propose a full-order sliding mode control extended state observer (fSMC-ESO) algorithm that combines the ESO and the fSMC for a robotic joint actuated by a pair of antagonistic PAMs. The fSMC is employed to eliminate the chattering and to guarantee the finite-time convergence, and the ESO is adopted to observe both the total disturbance and the states of the robot system, so that we can inhibit the disturbance and compensate the nonlinearity efficiently. Both simulations and physical experiments are conducted to validate the proposed method. We suggest that the proposed method can be applied to the robotic systems actuated by PAMs and remarkably improve the performance of the robot system.


Author(s):  
Peikun Zhu ◽  
Yong Chen ◽  
Meng Li

Aiming at the parameter uncertainty and load torque disturbance of permanent magnet synchronous motor system, a terminal sliding mode control algorithm for permanent magnet synchronous motor based on the reaching law is proposed. First, a sliding mode control algorithm for sliding mode reaching law is proposed, which can dynamically adapt to the changes in system state. Second, a sliding mode disturbance observer is designed to estimate the lumped disturbance in real time and to compensate the controller for disturbance. On this basis, an online identification method based on disturbance observer for viscous friction coefficient and moment of inertia is used to reduce the influence of parameter uncertainty on the control system. Simulation and experimental results show the effectiveness of the method.


Sign in / Sign up

Export Citation Format

Share Document