scholarly journals Practical Simplified Computing Method of Natural Vibration Frequency of Cable-stayed Bridge during Construction Stage

2020 ◽  
Vol 1549 ◽  
pp. 032090
Author(s):  
Xingnai Wang ◽  
Peijian Li
2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Mei Kuihua ◽  
Sun Shengjiang ◽  
Jin Guoqing ◽  
Sun Yamin

The elastic modulus and deadweight of carbon fiber-reinforced polymer (CFRP) cables are different from those of steel cables. Thus, the static and dynamic behaviors of cable-stayed bridges using CFRP cables are different from those of cable-stayed bridges using steel cables. The static and dynamic performances of the two kinds of bridges with a span of 1000 m were studied using the numerical method. The effects of geometric nonlinear factors on static performance of the two kinds of cable-stayed bridges were analyzed. The live load effects and temperature effects of the two cable-stayed bridges were also analyzed. The influences of design parameters, including different structural systems, the numbers of auxiliary piers, and the space arrangement types of cable, on the dynamic performance of the cable-stayed bridge using CFRP cables were also studied. Results demonstrate that sag effect of the CFRP cable is much smaller than that of steel cable. The temperature effects of CFRP cable-stayed bridge are less than those of steel cable-stayed bridge. The vertical bending natural vibration frequency of the CFRP cable-stayed bridge is generally lower than that of steel cable-stayed bridge, whereas the torsional natural vibration frequency of the former is higher than that of the latter.


Author(s):  
Yuan Zhou ◽  
Tian Tian ◽  
Xiongfei Yu ◽  
Ran Ren ◽  
Liangcai Zhou ◽  
...  

Author(s):  
Татьяна Георгиевна Рытова ◽  
Людмила Анатольевна Максимова ◽  
Анастасия Георгиевна Николаева ◽  
Татьяна Михайловна Макарова ◽  
Надежда Георгиевна Пфаненштиль

Приводится анализ частоты собственных колебаний большепролетной фермы с фланцевыми соединениями. Выполнен расчет фланцевого соединения с различными случаями исключения болтов из работы соединения. Анализ результата расчета показал, что возникновение повреждений и дефектов конструкций здания в локальных зонах, величина которых несущественно снижает общую жесткость каркаса, практически не влияет на динамические характеристики каркаса. The analysis of the natural vibration frequency of a large-span truss with flanged connections is given. The calculation of the flange connection with various cases of exclusion of bolts from the connection operation is performed. Analysis of the calculation results showed that the occurrence of damage and defects in the building structures in local areas, the value of which significantly reduces the overall rigidity of the frame, practically does not affect the dynamic characteristics of the frame.


2014 ◽  
Author(s):  
Zh. Kang ◽  
Yunhe Zhai ◽  
Ruxin Song ◽  
Liping Sun

In this paper, model tests were carried out to investigate two degrees of freedom VIV of horizontally-laid cylinders with diameters of 5cm, 11cm, 20cm and length 120cm and compared their vibration trajectories. The test results showed that the in-line and cross-flow vibration frequency of different scale cylinders demonstrate “multi frequency” phenomenon, that is, the in-line vibration frequency is not only twice but also once or four times as much as the cross-flow vibration frequency in some scale, natural frequency and reduced velocity conditions. Also, the cross-flow multi-frequency vibration phenomenon occurred. The trajectory of the vibration cylinder differentiated from the traditional “8” shape accordingly. The vibration trajectory, especially of small-scale cylinder, changed in most conspicuous manner. Through the initial research and analysis, it was found that in addition to in-line and cross-flow natural vibration frequency and the flow velocity, the shape of cylinders was also one of the main causes leading to different vibration trajectory forms.


1996 ◽  
Vol 459 ◽  
Author(s):  
J.-E. Bidaux ◽  
J.-A. E. Månson ◽  
R. Gotthardt

ABSTRACTThe use of shape-memory-alloy (SMA) fibres to actively changethe stiffness of a composite beam is investigated on a model system composed of an epoxy matrix with a series of embedded pre-strained NiTi fibres. Stiffness changes are detected through shifts in the natural vibration frequency of the beam. When electrically heated, the pre-strained NiTi fibres undergo a phase transformation. Since the shape recovery associated with the transformation is restrained by the constraints of both the matrix and the clamping device, a force is generated. This force leads to an increase in the natural vibration frequency of the composite beam. Depending on the degree of fibre pre-strain, either ordinary martensite, R-phase or a mixture of the two can be stress-induced. It is found that the R-phase gives rise to the largest change in vibration frequency for a given temperature increase and the most reversible behaviour. Its low transformation strain is also more favourable for fibre-matrix adhesion. The effect of stress relaxation in the polymer matrix on the composite response is discussed.


Sign in / Sign up

Export Citation Format

Share Document