Design and Realization of Low profile Compact Wideband Monopole Printed Antenna for C and X band Application

This study reports the design of a coplanar waveguide (CPW)-fed triple band fractal antenna for radio navigation and fixed satellite services. Reported antenna has low profile, multiband and wideband performance which make it suitable for the radio navigation and fixed satellite services in S band, C bandand X band. Proposed antenna resonates at 2.6GHz, 4.4GHz, and 8.7 GHz having bandwidth of 0.2457GHz, 0.700GHz, and 4.1980 GHz respectively. Maximumgain for the resonating bands is 3.6 dB, 5.5 dB, and 7.3 dB respectively. Simulated performance parameter of proposed antenna is verified experimentally by testing the fabricated antenna. Measured and simulated results are in good agreement

Download Full-text

Multiband and Miniaturized dual layer Antenna incorporated with FSS and DGS

Advanced Electromagnetics ◽

10.7716/aem.v7i1.534 ◽

2018 ◽

Vol 7 (1) ◽

pp. 1-6 ◽

Cited By ~ 2

Author(s):

S. Sah ◽

M. R. Tripathy ◽

A. Mittal

Keyword(s):

Wireless Communication ◽

Frequency Selective Surfaces ◽

Printed Antenna ◽

Defected Ground Structure ◽

Patch Area ◽

Ground Structure ◽

X Band ◽

Type Frequency ◽

Frequency Selective

A novel dual layer rectangular printed Antenna based on loop type Frequency selective surfaces with five concentric rings and I shaped defected ground structure (DGS) is designed and investigated. The deigned antenna is tested for application in C band, WiFi devices and some cordless telephones and X band radiolocation, airborne and naval radars as multiband operational frequencies are at 5.5GHz, 6.81GHz, 9.3GHz and thus covers two wireless communication band C Band (4 to 8GHz ) and X band (8 to 12 GHz) The bandwidth is 200MHz, 300MHz and 1GHz respectively and measured gain of this designed antenna are 2.42dBi against 5.5GHz, 2.80dBi against 6.81GHz, 6.76dBi against 9.3GHz. The proposed antenna in addition to multiband operation also exhibits minituarization.The Floquet port technique is used to analyse concentric rings. The Results comparison of proposed structure with the basic dual layer antenna resonaing at 5.5GHz shows the patch area is reduced by 58.15% while the volume of the antenna is reduced by 81.5%.

Download Full-text

X-band Integrated Printed Antenna Measurement

2018 IEEE/MTT-S International Microwave Symposium - IMS ◽

10.1109/mwsym.2018.8439526 ◽

2018 ◽

Author(s):

Michael Hollenbeck ◽

Robert Smith ◽

Clinton Cathey ◽

Janos Opra

Keyword(s):

Printed Antenna ◽

Antenna Measurement ◽

X Band

Download Full-text

A Novel Low Profile Polarization Insensitive Electromagnetic Shield for X-Band Applications

10.1109/comcomap53641.2021.9653100 ◽

2021 ◽

Author(s):

Muhammad Idrees ◽

Sai-Wai Wong ◽

Yejun He ◽

Saifullah Khalid ◽

Muhammad Ali Khalid ◽

...

Keyword(s):

Low Profile ◽

X Band ◽

Electromagnetic Shield ◽

Polarization Insensitive

Download Full-text

Development and Miniaturized of Circularly Polarization Diversity at Cavity Backed SIW Antenna for X-Band Application

Frequenz ◽

10.1515/freq-2018-0230 ◽

2019 ◽

Vol 73 (9-10) ◽

pp. 317-320

Author(s):

Saeid Karamzadeh ◽

Vahid Rafiei ◽

Hasan Saygin

Keyword(s):

Schottky Diodes ◽

Axial Ratio ◽

Impedance Bandwidth ◽

Polarization Diversity ◽

Circularly Polarized ◽

Left Hand ◽

Low Profile ◽

X Band ◽

Coaxial Feed ◽

Good Agreement

Abstract In this work circularly polarization diversity has been achieved by utilizing two Schottky diodes on low profile cavity-backed substrate integrated waveguide (CBSIW). In comparison with other studies in the literature, the size of antenna has been reduced to 0.54λg × 0.76λg by helping a 50-Ohm coaxial feed line. The impedance bandwidth, axial ratio bandwidth and antenna gain are improved to 10.02 %, 5.2 % and 7.68dBi, respectively. In addition, the proposed antenna can generate either a left-hand circularly polarized (LHCP) or a right-hand circularly polarized (RHCP) radiation. The developed antenna was fabricated and tested and the achieved results were in good agreement with the simulated one.

Download Full-text

High‐power and low‐profile metamaterials for reflectarray based on ‐negative layer in X‐band

Electronics Letters ◽

10.1049/el.2019.3315 ◽

2020 ◽

Vol 56 (4) ◽

pp. 172-174

Author(s):

Xiao Ma ◽

Feng Yang ◽

Peng Yang ◽

Rui Wang ◽

Yi Yan

Keyword(s):

High Power ◽

Low Profile ◽

X Band

Download Full-text

A Compact Printed Quadruple Band-Notched UWB Antenna

International Journal of Antennas and Propagation ◽

10.1155/2013/956898 ◽

2013 ◽

Vol 2013 ◽

pp. 1-6 ◽

Cited By ~ 6

Author(s):

Xiaoyin Li ◽

Lianshan Yan ◽

Wei Pan ◽

Bin Luo

Keyword(s):

Coplanar Waveguide ◽

Radiation Patterns ◽

Uwb Antenna ◽

Broad Bandwidth ◽

Wireless Applications ◽

Notched Band ◽

Low Profile ◽

X Band

A novel compact coplanar waveguide- (CPW-) fed ultrawideband (UWB) printed planar volcano-smoke antenna (PVSA) with four band-notches for various wireless applications is proposed and demonstrated. The low-profile antenna consists of a C-shaped parasitic strip to generate a notched band at 8.01~8.55 GHz for the ITU band, two C-shaped slots, and an inverted U-shaped slot etched in the radiator patch to create three notched bands at 5.15~5.35 GHz, 5.75~5.85 GHz, and 7.25~7.75 GHz for filtering the WLAN and X-band satellite signals. Simulated and measured results both confirm that the proposed antenna has a broad bandwidth of 3.1~12 GHz with VSWR < 2 and good omnidirectional radiation patterns with four notched-bands.

Download Full-text

Compact Differential-Fed Planar Filtering Antennas

Electronics ◽

10.3390/electronics8111241 ◽

2019 ◽

Vol 8 (11) ◽

pp. 1241

Author(s):

Emadeldeen Hassan ◽

Denys Martynenko ◽

Eddie Wadbro ◽

Gunter Fischer ◽

Martin Berggren

Keyword(s):

Frequency Band ◽

Optimization Problem ◽

Impedance Bandwidth ◽

Cross Polarization ◽

Planar Antennas ◽

Good Match ◽

Topology Optimization Problem ◽

Low Profile ◽

X Band ◽

Measurement Results

This paper proposes novel low-profile differential-fed planar antennas with embedded sharp frequency selectively. The antennas are compact and easy to integrate with differential devices without matching baluns. The antenna design is formulated as a topology optimization problem, where requirements on impedance bandwidth, directivity, and filtering are used as the design objectives. The optimized antennas operate over the frequency band 6.0–8.5 GHz. The antennas have reflection coefficients below −15 dB, cross-polarization levels below −42 dB, a maximum gain of 6.0 ± 0.5 dB, and a uniform directivity over more than 130° beamwidth angle in the frequency band of interest. In addition, the antennas exhibit sharp roll-off between the operational band and frequencies around the 5.8 GHz WiFi band and the 10 GHz X-band. One antenna has been fabricated with a good match between simulation and measurement results.

Download Full-text