scholarly journals Investigating the adhesive properties of polymers for 3D printing

2021 ◽  
Vol 2057 (1) ◽  
pp. 012106
Author(s):  
L E Vendland ◽  
V V Volkov-Muzylev ◽  
A N Demidov ◽  
A S Pugachuk
Keyword(s):  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Tensile Tests ◽  
Thermoplastic Resin ◽  
Adhesive Properties ◽  
Fused Deposition ◽  
Advantages And Disadvantages ◽  
Before And After ◽  
Deposition Modeling ◽  
Butadiene Styrene

Abstract The article presents the research of adhesive properties of various polymers used in additive manufacturing by fused deposition modeling. Tensile tests of additively manufactured samples of various polymers are carried out, electro-microscopic photographs of the working area are taken before and after tests, and studies on the manufacturability of printing are performed to exclude further typical errors identified during these tests. Samples of the following polymers are studied: thermoplastic resin acrylonitrile butadiene styrene (ABS +), thermoplastic resin acrylonitrile butadiene styrene with the addition of titanium nitrite as a dye (ABS + TiN), thermoplastic resin acrylonitrile butadiene styrene with the addition of polyester inserts (ABS polylactide (PLA), polylactide based compound (PLA HP), thermoplastic polyethylene terephthalate glycol (PETG), and nylon with carbon inserts (NSC). The work reveals the advantages and disadvantages of the investigated plastics. For example, deformations occur when the part is cooled down during printing process of ABS +, and a crack could form in stress concentrators as a result of the influence of cold air flows.

Investigation of Recycled Acrylonitrile Butadiene Styrene for Additive Manufacturing

2020 ◽  
pp. 130-154
Author(s):  
Shajahan Bin Maidin ◽  
Zulkeflee Abdullah ◽  
Ting Kung Hieng
Keyword(s):  
Mechanical Properties ◽  
Test Specimen ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Travel Speed ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Printing Processes ◽  
Butadiene Styrene

One of the disadvantages of fused deposition modeling (FDM) is waste produced during the printing processes. This investigation focuses on using 100% recycled Acrylonitrile Butadiene Styrene (ABS) for the FDM process. The recycling begins with re-granule the waste ABS material and produces it into a new filament. The new recycled filament was used to print the test specimen. Investigation on the mechanical properties and the surface quality of the test specimen and comparison with standard ABS specimen was done. The result shows that the recycled ABS can be produced into filament with 335°C of extrusion temperature and 1.5 mm/s travel speed of the extruder conveyor. The surface roughness of recycled specimen is 6.94% higher than the standard ABS specimen. For ultimate tensile strength, there is a small difference in X and Y orientation between the standard and the recycled ABS specimen which are 22.93% and 19.98%, respectively. However, in Z orientation, it is 52.33% lower. This investigation proves that ABS can be recycled without significantly affecting its mechanical properties.

Fractographic analysis of tensile failure of acrylonitrile-butadiene-styrene fabricated by fused deposition modeling

2016 ◽  
Vol 11 ◽  
pp. 49-59 ◽  
Author(s):  
Jaret C. Riddick ◽  
Mulugeta A. Haile ◽  
Ray Von Wahlde ◽  
Daniel P. Cole ◽  
Oluwakayode Bamiduro ◽  
...  
Keyword(s):  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Tensile Failure ◽  
Fractographic Analysis ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Butadiene Styrene

Tensile Strength and Flexural Strength Testing of Acrylonitrile Butadiene Styrene (ABS) Materials for Biomimetic Robotic Applications

2014 ◽  
Vol 20 ◽  
pp. 11-21 ◽  
Author(s):  
Tran Linh Khuong ◽  
Zhao Gang ◽  
Muhammad Farid ◽  
Rao Yu ◽  
Zhuang Zhi Sun ◽  
...  
Keyword(s):  
Tensile Strength ◽  
3D Printing ◽  
Rapid Prototyping ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Butadiene Styrene

Biomimetic robots borrow their structure, senses and behavior from animals, such as humans or insects, and plants. Biomimetic design is design ofa machine, a robot or a system in engineeringdomain thatmimics operational and/orbehavioral model of a biological system in nature. 3D printing technology has another name as rapid prototyping technology. Currently it is being developed fastly and widely and is applied in many fields like the jewelry, footwear, industrial design, architecture, engineering and construction, automotive, aerospace, dental and medical industry, education, geographic information system, civil engineering, guns. 3D printing technology is able to manufacture complicated, sophisticated details that the traditional processing method cannot manufacture. Therefore, 3D printing technology can be seen as an effective tool in biomimetic, which can accurately simulate most of the biological structure. Fused Deposition Modeling (FDM) is a technology of the typical rapid prototyping. The main content of the article is the focusing on tensile strength test of the ABS-Acrylonitrile Butadiene Styrene material after using Fused Deposition Modeling (FDM) technology, concretization after it’s printed by UP2! 3D printer. The article focuses on two basic features which are Tensile Strength and Determination of flexural properties.

scholarly journals Biomaterials: Polylactic Acid and 3D Printing Processes for Orthosis and Prosthesis

2017 ◽  
Vol 54 (1) ◽  
pp. 98-102 ◽  
Author(s):  
Roxana Miclaus ◽  
Angela Repanovici ◽  
Nadinne Roman
Keyword(s):  
3D Printing ◽  
Polylactic Acid ◽  
Medical Devices ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Fused Deposition ◽  
The Past ◽  
Deposition Modeling ◽  
Printing Processes ◽  
Butadiene Styrene

Since the development of 3D printing, over the past decades, the domain of application has evolved significantly! Concerning the orthosis and prosthesis manufacturing, the 3D printing offers many possibilities for developing new medical devices for people with disabilities. Our paper wish to synthetize the main 3D printing methods and the biomaterial properties which can be used in orthosis and prosthesis manufacturing, like polylactic acid or acrylonitrile butadiene styrene. Fused Deposition Modeling and Stereo lithography are most used for medical devices manufacturing and usually using polylactic acid, considering the properties of this polymer and de organic componence.

Sign in / Sign up

Export Citation Format

Share Document