scholarly journals Numerical study on the effects of fin parameters on the charging process of PCM-based heat sink

2021 ◽  
Vol 2087 (1) ◽  
pp. 012057
Author(s):  
Yu Yang ◽  
Wenhao Pu ◽  
Haichen Yao ◽  
Xiaolong Xing
Keyword(s):  
Natural Convection ◽  
Phase Change ◽  
Heat Sink ◽  
Numerical Study ◽  
Operating Time ◽  
Three Dimensional ◽  
Heat Transfer Process ◽  
Optimal Configuration ◽  
Base Temperature ◽  
Safe Operating

Abstract In order to solve the heating problem of electronic devices, an optimal configuration of rectangular cavity straight fin phase change material (PCM) based heat sink is determined to extend the safe operating time in the charging process. With PCM-based heat sink as the object of research, a three-dimensional and transient melting model is constructed. The effects of fin number, height and thickness on phase change heat transfer process and natural convection are explored in depth, and the optimal configuration parameters of PCM-based heat sink are obtained. The results show that the configuration of 8 fins,15 mm in height and 2 mm in thickness is adopted as the optimal heat sink structure, with the longest safe operating time-1170 seconds. In the stable period of phase transition, the base temperature remains unchanged and the natural convection disturbance is strong. The short and dense fin arrangement can prolong the safe operating time of safety limit temperature 343K better.

EXPERIMENTAL AND NUMERICAL STUDY OF THREE-DIMENSIONAL NATURAL CONVECTION AND FREEZING IN WATER

1994 ◽  
Author(s):  
C. Abegg ◽  
Graham de Vahl Davis ◽  
W.J. Hiller ◽  
St. Koch ◽  
Tomasz A. Kowalewski ◽  
...  
Keyword(s):  
Natural Convection ◽  
Numerical Study ◽  
Three Dimensional

An Investigation of the Effect of interrupted fin arrangements on the Thermal Performance of a Heat Sink under a Free Convection Condition

2019 ◽  
Vol 7 (1) ◽  
pp. 43-53
Author(s):  
Abbas Jassem Jubear ◽  
Ali Hameed Abd
Keyword(s):  
Heat Transfer ◽  
Steady State ◽  
Natural Convection ◽  
Thermal Performance ◽  
Heat Sink ◽  
Numerical Study ◽  
Ansys Fluent ◽  
Fluent Software ◽  
Steady State Heat ◽  
Steady State Heat Transfer

The heat sink with vertically rectangular interrupted fins was investigated numerically in a natural convection field, with steady-state heat transfer. A numerical study has been conducted using ANSYS Fluent software (R16.1) in order to develop a 3-D numerical model.  The dimensions of the fins are (305 mm length, 100 mm width, 17 mm height, and 9.5 mm space between fins. The number of fins used on the surface is eight. In this study, the heat input was used as follows: 20, 40, 60, 80, 100, and 120 watts. This study focused on interrupted rectangular fins with a different arrangement and angle of the fins. Results show that the addition of interruption in fins in various arrangements will improve the thermal performance of the heat sink, and through the results, a better interruption rate as an equation can be obtained.

Numerical Study on the Effect of Inner Tube Position on Heat Transfer Process in Self-Recuperative Radiant Tube

2011 ◽  
Vol 228-229 ◽  
pp. 676-680 ◽  
Author(s):  
Ye Tian ◽  
Xun Liang Liu ◽  
Zhi Wen
Keyword(s):  
Heat Transfer ◽  
Transfer Process ◽  
Numerical Study ◽  
Flame Temperature ◽  
Three Dimensional ◽  
Mathematic Model ◽  
Heat Transfer Process ◽  
Bulk Temperature ◽  
Radiant Tube ◽  
Peak Value

A three-dimensional mathematic model is developed for a 100kw single-end recuperative radiant tube and the simulation is performed with the CFD software FLUENT. Also it is used to investigate the effect of distance between combustion chamber exit and inner tube on heat transfer process. The results suggest that the peak value of combustion flame temperature drops along with the increasing of distance, which leads to low NOX discharging. Also radiant tube surface bulk temperature decreases, which causes radiant tube heating performance losses.

Operational Time and Melt Fraction Based Optimization of a Phase Change Material Longitudinal Fin Heat Sink

2018 ◽  
Vol 10 (6) ◽  
Author(s):  
D. Jaya Krishna
Keyword(s):  
Phase Change ◽  
Phase Change Material ◽  
Heat Sink ◽  
Fluid Model ◽  
Melting Behavior ◽  
Base Temperature ◽  
Critical Temperatures ◽  
Volume Of Fluid Model ◽  
Change Material ◽  
Operational Time

Abstract In the present study, the numerical investigation has been performed for a phase change material (PCM)-based longitudinal fin heat sink. The fins are taken as an integral part of the heat sink and are made up of aluminum. The PCM considered in the study is RT44HC. Heat is transferred to the heat sink through its horizontal base. In order to simulate the melting behavior of the PCM, volume of fluid model has been used. To attain the best configuration with optimum operational time, Taguchi method has been used followed by analysis of melt fraction and maximum base temperature. The optimized heat sink configuration with maximum operational time has been obtained at the critical temperatures of 54.8 °C, 63 °C, and 72.6 °C.

Effect of Periodic Imposed Heat Flux on Three-Dimensional Natural Convection in a Partially Heated Cubical Enclosure

2016 ◽  
Vol 831 ◽  
pp. 83-91
Author(s):  
Lahoucine Belarche ◽  
Btissam Abourida
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Numerical Study ◽  
Control Volume ◽  
Vertical Wall ◽  
Three Dimensional ◽  
Maximum Temperature ◽  
Cubical Enclosure ◽  
Simplec Algorithm ◽  
Volume Method

The three-dimensional numerical study of natural convection in a cubical enclosure, discretely heated, was carried out in this study. Two heating square sections, similar to the integrated electronic components, are placed on the vertical wall of the enclosure. The imposed heating fluxes vary sinusoidally with time, in phase and in opposition of phase. The temperature of the opposite vertical wall is maintained at a cold uniform temperature and the other walls are adiabatic. The governing equations are solved using Control volume method by SIMPLEC algorithm. The sections dimension ε = D / H and the Rayleigh number Ra were fixed respectively at 0,35 and 106. The average heat transfer and the maximum temperature on the active portions will be examined for a given set of the governing parameters, namely the amplitude of the variable temperatures a and their period τp. The obtained results show significant changes in terms of heat transfer, by proper choice of the heating mode and the governing parameters.

Natural Convection in an Enclosure With Blend of Micro Encapsulated Phase Change Materials

2013 ◽  
Author(s):  
Yasmin Khakpour ◽  
Jamal Seyed-Yagoobi
Keyword(s):  
Heat Transfer ◽  
Thermal Expansion ◽  
Natural Convection ◽  
Phase Change ◽  
Latent Heat ◽  
Phase Change Materials ◽  
Numerical Study ◽  
Pure Water ◽  
Operating Conditions ◽  
Effective Density

This numerical study investigates the effect of using a blend of micro-encapsulated phase change materials (MEPCMs) on the heat transfer characteristics of a liquid in a rectangular enclosure driven by natural convection. A comparison has been made between the cases of using single component MEPCM slurry and a blend of two-component MEPCM slurry. The natural convection is generated by the temperature difference between two vertical walls of the enclosure maintained at constant temperatures. Each of the two phase change materials store latent heat at a specific range of temperatures. During phase change of the PCM, the effective density of the slurry varies. This results in thermal expansion and hence a buoyancy driven flow. The effects of MEPCM concentration in the slurry and changes in the operating conditions such as the wall temperatures compared to that of pure water have been studied. The MEPCM latent heat and the increased volumetric thermal expansion coefficient during phase change of the MEPCM play a major role in this heat transfer augmentation.

scholarly journals Numerical study of the turbulent natural convection of nanofluids in a partially heated cubic cavity

2021 ◽  
pp. 57-57
Author(s):  
Zakaria Lafdaili ◽  
Sakina El-Hamdani ◽  
Abdelaziz Bendou ◽  
Karim Limam ◽  
Bara El-Hafad
Keyword(s):  
Nusselt Number ◽  
Natural Convection ◽  
Heat Exchange ◽  
Metallic Nanoparticles ◽  
Volume Fraction ◽  
Numerical Study ◽  
Three Dimensional ◽  
Stability Characteristic ◽  
Horizontal Strip ◽  
Turbulent Natural Convection

In this work we study numerically the three-dimensional turbulent natural convection in a partially heated cubic cavity filled with water containing metallic nanoparticles, metallic oxides and others based on carbon.The objective is to study and compare the effect of the addition of nanoparticles studied in water and also the effect of the position of the heated partition on the heat exchange by turbulent natural convection in this type of geometry, which can significantly improve the design of heat exchange systems for better space optimization. For this we have treated numerically for different volume fractions the turbulent natural convection in the two cases where the cavity is heated respectively by a vertical and horizontal strip in the middle of one of the vertical walls. To take into account the effects of turbulence, we used the standard turbulence model ? - ?. The governing equations are discretized by the finite volume method using the power law scheme which offers a good stability characteristic in this type of flow. The results are presented in the form of isothermal lines and current lines. The variation of the mean Nusselt number is calculated for the two positions of the heated partition as a function of the volume fraction of the nanoparticles studied in water for different Rayleigh numbers.The results show that carbon-based nanoparticles intensify heat exchange by convection better and that the position of the heated partition significantly influences heat exchange by natural convection. In fact, an improvement in the average Nusselt number of more than 20% is observed for the case where the heated partition is horizontal.

Sign in / Sign up

Export Citation Format

Share Document