scholarly journals Density Functional Theory Study of Hydrogen Adsorption on Pt Pd/γ-Al2O3 Surface

2021 ◽  
Vol 2097 (1) ◽  
pp. 012020
Author(s):  
Liang Zhang ◽  
Jia Li ◽  
Yong Chen ◽  
Cheng Zeng ◽  
Wu Kang ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Adsorption Energy ◽  
Density Functional ◽  
Hydrogen Adsorption ◽  
Energy Gap ◽  
Solid Catalyst ◽  
Functional Theory ◽  
Adsorption Sites ◽  
Lower Energy Level ◽  
Catalytic Hydrogen

Abstract At present passive hydrogen recombiners (PAR) are used to prevent hydrogen explosion. Hydrogen removal catalyst is the core component of PAR. The adsorption of hydrogen on the solid catalyst surface is the premise of catalytic hydrogen removal and is of great significance for deeper understanding of hydrogen removal mechanism. The adsorption behavior of H2-Pt Pd/γ-Al2O3 system has been studied by using density functional theory and periodic slab model. The results of different adsorption sites indicate the adsorption energy of top site is highest, which is -1.2584eV. Higher adsorption energy means stronger interaction between H2 and catalyst substrate, which elongates H-H bond and increases the negative charge on H2. With increasing doping content of Pd, the adsorption energy of substrate decreases gradually. The adsorption energy absolute value of Pt4/γ-Al2O3 is highest and its H-H bond is longest, arriving at 0.0967nm. After adsorbed on substrate, the energy gap of H2 decreases drastically with the lowest energy gap of H2-Pt4/γ-Al2O3 that is 0.5197eV, and the peaks of density of state pattern move to lower energy level. This is because that the d orbital of Pt/Pd atoms interacts with the τ* anti-bond orbital of H2 strongly, transferring electrons to the τ* anti-bond orbital of H2. Doping Pd increases the energy gap of molecule orbital.

scholarly journals Competitive Adsorption of H2O and SO2 on Catalytic Platinum Surfaces: a Density Functional Theory Study

2021 ◽  
Vol 74 ◽  
Author(s):  
Marietjie J. Ungerer ◽  
David Santos-Carballal ◽  
Cornelia G.C.E. van Sittert ◽  
Nora H. de Leeuw
Keyword(s):  
Density Functional Theory ◽  
Adsorption Energy ◽  
Sulphur Dioxide ◽  
Density Functional ◽  
Competitive Adsorption ◽  
Hydrogen Adsorption ◽  
Surface Reactivity ◽  
Functional Theory ◽  
Sulphur Poisoning ◽  
Production Of Hydrogen

ABSTRACT Platinum has been widely used as the catalyst of choice for the production of hydrogen in the hybrid sulphur (HyS) cycle. In this cycle, water (H2O) and sulphur dioxide (SO2) react to form sulphuric acid and hydrogen. However, the surface reactivity of platinum towards H2O and SO2 is not yet fully understood, especially considering the competitive adsorption that may occur on the surface. In this study, we have carried out density functional theory calculations with long-range dispersion corrections [DFT-D3-(BJ)] to investigate the competitive effect of both H2O and SO2 on the Pt (001), (011) and (111) surfaces. Comparing the adsorption of a single H2O molecule on the various Pt surfaces, it was found that the lowest adsorption energy (Eads = -1.758 eV) was obtained for the dissociative adsorption of H2O on the (001) surface, followed by the molecular adsorption on the (011) surface (Eads = -0.699 eV) and (111) surface (Eads = -0.464 eV). For the molecular SO2 adsorption, the trend was similar, with the lowest adsorption energy (Eads = -2.471 eV) obtained on the (001) surface, followed by the (011) surface (Eads = -2.390 eV) and (111) surface (Eads = -1.852 eV). During competitive adsorption by H2O and SO2, the SO2 molecule will therefore preferentially adsorb onto the Pt surface. If the concentration of SO2 increases, self-reaction between two neighbouring SO2 molecules may occur, leading to the formation of sulphur monoxide (SO) and -trioxide (SO3) on the surface, which could lead to sulphur poisoning of the Pt catalytic surface. Keywords: Platinum, water, sulphur dioxide, hydrogen, adsorption, density functional theory.

STRUCTURES, ABSORPTION SPECTRA, AND ELECTRONIC PROPERTIES OF POLYFLUORENE AND ITS DERIVATIVES: A THEORETICAL STUDY

2006 ◽  
Vol 05 (03) ◽  
pp. 595-608 ◽  
Author(s):  
KRIENGSAK SRIWICHITKAMOL ◽  
SONGWUT SURAMITR ◽  
POTJAMAN POOLMEE ◽  
SUPA HANNONGBUA
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Energy Gap ◽  
Level Energy ◽  
Excitation Energies ◽  
Lumo Energy ◽  
Functional Theory ◽  
Local Energy Minimum ◽  
Pi Systems ◽  
Homo Lumo

The structural and energetic properties of polyfluorene and its derivatives were investigated, using quantum chemical calculations. Conformational analysis of bifluorene was performed by using ab initio (HF/6-31G* and MP2/6-31G*) and density functional theory (B3LYP/6-31G*) calculations. The results showed that the local energy minimum of bifluorene lies between the coplanar and perpendicular conformation, and the B3LYP/6-31G* calculations led to the overestimation of the stability of the planar pi systems. The HOMO-LUMO energy differences of fluorene oligomers and its derivatives — 9,9-dihexylfluorene (DHPF), 9,9-dioctylfluorene (PFO), and bis(2-ethylhexyl)fluorene (BEHPF) — were calculated at the B3LYP/6-31G* level. Energy gaps and effective conjugation lengths of the corresponding polymers were obtained by extrapolating HOMO-LUMO energy differences and the lowest excitation energies to infinite chain length. The lowest excitation energies and the maximum absorption wavelength of polyfluorene were also performed, employing the time-dependent density functional theory (TDDFT) and ZINDO methods. The extrapolations, based on TDDFT and ZINDO calculations, agree well with experimental results. These theoretical methods can be useful for the design of new polymeric structures with a reducing energy gap.

Investigation, using density function theory, of coverage of the kaolinite (001) surface during hydrogen adsorption

Clay Minerals ◽  
2018 ◽  
Vol 53 (3) ◽  
pp. 393-402 ◽  
Author(s):  
Jian Zhao ◽  
Wei Gao ◽  
Zhi-Gang Tao ◽  
Hong-Yun Guo ◽  
Man-Chao He
Keyword(s):  
Density Functional ◽  
Hydrogen Adsorption ◽  
Function Theory ◽  
Lattice Relaxation ◽  
Electronic Density ◽  
Functional Theory ◽  
Adsorption Sites ◽  
Coverage Dependence ◽  
Hydrogen Molecules ◽  
Wide Range

ABSTRACTKaolinite can be used for many applications, including the underground storage of gases. Density functional theory was employed to investigate the adsorption of hydrogen molecules on the kaolinite (001) surface. The coverage dependence of the adsorption sites and energetics was studied systematically for a wide range of coverage, Θ (from 1/16 to 1 monolayer). The three-fold hollow site is the most stable, followed by the bridge, top-z and top sites. The adsorption energy of H2 decreased with increasing coverage, thus indicating the lower stability of surface adsorption due to the repulsion of neighbouring H2 molecules. The coverage has obvious effects on hydrogen adsorption. Other properties of the H2/kaolinite (001) system, including the lattice relaxation and changes of electronic density of states, were also studied and are discussed in detail.

scholarly journals Chloroquine drug and Graphene complex for treatment of COVID-19

2020 ◽  
Author(s):  
Saeedeh Mohammadi ◽  
Mohammad Esmailpour ◽  
Mina Mohammadi
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Energy Gap ◽  
Dft Method ◽  
Complex State ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Structural And Electrical Properties ◽  
Suitable Structure ◽  
Drug Complex

Abstract This paper is a new step in helping the treatment of coronavirus by improving the performance of chloroquine drug. For this purpose, we propose a complex of chloroquine drug with graphene nanoribbon (GNR) scheme. We compute the structural and electrical properties and absorption of chloroquine (C18H26ClN3) and GNR complex using the density functional theory (DFT) method. By creating a drug and GNR complex, the density of states of electrons increases and the energy gap decreases compared to the chloroquine. Also, using absorption calculations and spectrums such as infrared and UV-Vis spectra, we showed that GNR is a suitable structure for creating chloroquine drug complex. Our results show that the dipole moment, global softness and electrophilicity for the drug complex increases compared to the non-complex state. Our calculations can be useful for increasing performance and reducing the side effects of chloroquine, and thus can be effective in treating coronavirus.

scholarly journals A NOVEL FRACTAL GEOMETRY DOPING FOR GRAPHENE NANORIBBON AND THE OPTIMIZATION OF CRYSTAL: A DENSITY FUNCTIONAL THEORY (DFT) STUDY

2020 ◽  
Vol 17 (35) ◽  
pp. 1148-1158
Author(s):  
Mohammed L. JABBAR ◽  
Kadhum J. AL-SHEJAIRY
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Energy Gap ◽  
Minimum Energy ◽  
Graphene Nanoribbon ◽  
Chemical Doping ◽  
Functional Theory ◽  
Lower Reactivity ◽  
The Density Functional Theory ◽  
Semiconductor Behavior

Chemical doping is a promising route to engineering and controlling the electronic properties of the zigzag graphene nanoribbon (ZGNR). By using the first-principles of the density functional theory (DFT) calculations at the B3LYP/ 6-31G, which implemented in the Gaussian 09 software, various properties, such as the geometrical structure, DOS, HOMO, LUMO infrared spectra, and energy gap of the ZGNR, were investigated with various sites and concentrations of the phosphorus (P). It was observed that the ZGNR could be converted from linear to fractal dimension by using phosphorus (P) impurities. Also, the fractal binary tree of the ZGNR and P-ZGNR structures is a highlight. The results demonstrated that the energy gap has different values, which located at this range from 0.51eV to 1.158 eV for pristine ZGNR and P-ZGNR structures. This range of energy gap is variable according to the use of GNRs in any apparatus. Then, the P-ZGNR has semiconductor behavior. Moreover, there are no imaginary wavenumbers on the evaluated vibrational spectrum confirms that the model corresponds to minimum energy. Then, these results make P-ZGNR can be utilized in various applications due to this structure became more stable and lower reactivity.

A density functional theory study on the performance of graphene and N-doped graphene supported Au3 cluster catalyst for acetylene hydrochlorination

2016 ◽  
Vol 94 (10) ◽  
pp. 842-847 ◽  
Author(s):  
Fei Zhao ◽  
Yang Wang ◽  
Lihua Kang
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Energy Gap ◽  
Activation Barrier ◽  
Similar Reaction ◽  
Functional Theory ◽  
Acetylene Hydrochlorination ◽  
Doped Graphene ◽  
Calculated Activation ◽  
Calculated Activation Barrier

Density functional theory (DFT) calculation was used to investigate the mechanism of Au3 clusters, separately supported on pure graphene (Au3/graphene) and one graphitic N-doped graphene (Au3/N-graphene). These supported Au3 clusters were used to catalyze acetylene hydrochlorination. Results show that the graphene supporter could obviously enhance the adsorption of reactants. Also, N-atom doping could broaden the energy gap between the HOMO of graphene and the LUMO of Au3, leading to the significantly attenuated interaction between the Au3 cluster and graphene by more than 19 kcal/mol (1 cal = 4.184 J). The two catalysts possessed extremely similar reaction mechanisms with activation energy values of 23.26 and 23.89 kcal/mol, respectively. The calculated activation barrier declined in the order of Au3 < Au3/N-graphene < Au3/graphene, suggesting that Au3/N-graphene could be a potential catalyst for acetylene hydrochlorination.

SOLVENT EFFECTS ON THE ELECTRONIC STRUCTURE AND NON-LINEAR OPTICAL PROPERTIES OF PYRENE AND SOME OF ITS DERIVATIVES BASED ON DENSITY FUNCTIONAL THEORY

2021 ◽  
Vol 4 (4) ◽  
pp. 236-251
Author(s):  
A. S. Gidado ◽  
L. S. Taura ◽  
A. Musa
Keyword(s):  
Density Functional Theory ◽  
Gas Phase ◽  
Density Functional ◽  
Energy Gap ◽  
Chemical Reactivity ◽  
Basis Set ◽  
Lumo Energy ◽  
Functional Theory ◽  
Organic Optoelectronic ◽  
Homo Lumo

Pyrene (C16H10) is an organic semiconductor which has wide applications in the field of organic electronics suitable for the development of organic light emitting diodes (OLED) and organic photovoltaic cells (OPV). In this work, Density Functional Theory (DFT) using Becke’s three and Lee Yang Parr (B3LYP) functional with basis set 6-311++G(d, p) implemented in Gaussian 03 package was  used to compute total energy, bond parameters, HOMO-LUMO energy gap, electron affinity, ionization potential, chemical reactivity descriptors, dipole moment, isotropic polarizability (α), anisotropy of polarizability ( Δ∝) total first order hyper-polarizability () and second order hyperpolarizability (). The molecules used are pyrene, 1-chloropyrene and 4-chloropyrene  in gas phase and in five different solvents: benzene, chloroform, acetone, DMSO and water. The results obtained show that solvents and chlorination actually influenced the properties of the molecules. The isolated pyrene in acetone has the largest value of HOMO-LUMO energy gap of and is a bit closer to a previously reported experimental value of  and hence is the most stable. Thus, the pyrene molecule has more kinetic stability and can be described as low reactive molecule. The calculated dipole moments are in the order of 4-chloropyrene (1.7645 D) < 1-chloropyrene (1.9663 D) in gas phase. The anisotropy of polarizability ( for pyrene and its derivatives were found to increase with increasing polarity of the solvents.  In a nutshell, the molecules will be promising for organic optoelectronic devices based on their computed properties as reported by this work.

A Theoretical Study of H2S Toxic Gas Adsorption on Pristine and Doped Monolayer (AlN)21 Using Density Functional Theory

2020 ◽  
Vol 12 (02) ◽  
pp. 99-111
Author(s):  
Jamal A. Shlaka ◽  
◽  
Abbas H. Abo Nasria
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Theoretical Study ◽  
Gas Adsorption ◽  
Aluminium Nitride ◽  
Functional Theory ◽  
Adsorption Sites ◽  
Gas Molecules ◽  
Toxic Gas ◽  
Center Ring

Been studying the interactions between graphene - like aluminium nitride P(AlN)21 nano ribbons doped and defect (AlN)21Sheet, Molecules and small toxic gas molecules ( H2S), were built for two different adsorption sites on graphene like aluminium nitride P(AlN)21. this was done by employing B3LYP density functional theory (DFT) with 6-31G*(d,p) using Gaussian 09 program, Gaussian viw5.0 package of programs and Nanotube Modeller program 2018. the adsorptions of H2S on P(AlN)21, (C) atoms-doped P(AL-N)20 sheet, D-P(AL-N)20 and D-(C)atoms-doped P(AL-N)19 (on atom) with (Ead) (-0.468eV),(-0.473 eV), (-0.457 eV), (-0.4478 eV) and (-0.454 eV), respectively, (Ead) of H2S on the center ring of the P(AL-N)21, (C) atoms-doped P(AL-N)20 sheet, D-P(AL-N)20 and D-(C,B)atoms-doped P(AL-N)19 sheet are (-0.280 eV),(-0.465 eV), (-0.405 eV), (-0.468 eV) and -0.282 eV), respectively, are weak physisorption . However, the adsorptions of H2S, on the ((AlN)20 -B and D- (AlN)19 -B), (on atom N and center ring the sheet) are a strong chemisorption because of the (Ead) larger than -0.5 eV, due to the strong interaction, the ((AlN)20-B and D-(AlN)19-B), could catalyst or activate, through the results that we obtained, which are the improvement of the sheet P(AlN)21 by doping and per forming a defect in, it that can be used to design sensors. DOI: http://dx.doi.org/10.31257/2018/JKP/2020/120210

Intercalation of cobaltocene into WS2 nanosheets for enhanced catalytic hydrogen evolution reaction

2019 ◽  
Vol 7 (14) ◽  
pp. 8101-8106 ◽  
Author(s):  
In Hye Kwak ◽  
Hafiz Ghulam Abbas ◽  
Ik Seon Kwon ◽  
Yun Chang Park ◽  
Jaemin Seo ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Hydrogen Evolution ◽  
Hydrogen Evolution Reaction ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Functional Theory ◽  
Spin Polarized ◽  
Catalytic Hydrogen ◽  
Catalytic Hydrogen Evolution ◽  
Ws2 Nanosheets

Cobaltocene-intercalated WS2 nanosheets exhibit excellent catalytic activity toward the hydrogen evolution reaction, which is supported by spin-polarized density functional theory calculations.

Sign in / Sign up

Export Citation Format

Share Document