scholarly journals Numerical approach for fluids flow and thermal convection in microchannels

2021 ◽  
Vol 2116 (1) ◽  
pp. 012049
Author(s):  
Wagd Ajeeb ◽  
Monica S A Oliveira ◽  
Nelson Martins ◽  
S M Sohel Murshed
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Single Phase ◽  
Numerical Models ◽  
Convection Heat Transfer ◽  
Numerical Approach ◽  
Experimental Models ◽  
Thermal Fluids ◽  
Significant Research ◽  
Computational Fluid Dynamics Cfd

Abstract The heat transfer performance of conventional thermal fluids in microchannels is an attractive method for cooling devices such as microelectronic applications. Computational fluid dynamics (CFD) is a very significant research technique in heat transfer studies and validated numerical models of microscale thermal management systems are of utmost importance. In this paper, some literature studies on available numerical and experimental models for single-phase and Newtonian fluids are reviewed and methods to tackle laminar fluid flow through a microchannel are sought. A few case studies are selected, and a numerical simulation is performed to obtain fluid flow behaviour within a microchannel, to test the level of accuracy and understanding of the problem. The numerical results are compared with relevant experimental results from the literature and a proper methodology for numerical investigation of single-phase and Newtonian fluid in laminar flow convection heat transfer in microscale heat exchangers is defined.

A Novel Numerical Approach for Convective and Radiative Heat Transfer Analysis of Fluid Flow Problems Within Triangular Cavities Using Natural Element Method

2017 ◽  
Vol 139 (8) ◽  
Author(s):  
Ardeshir Moftakhari ◽  
Cyrus Aghanajafi ◽  
Ardalan Moftakhari Chaei Ghazvin
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Radiation Heat Transfer ◽  
Convection Heat Transfer ◽  
Numerical Approach ◽  
Heat Transfer Analysis ◽  
Numerical Heat Transfer ◽  
Engineering Sciences ◽  
Natural Element

Thermal analysis of fluid flow is always regarded as an important research issue within cavities in order to become familiar with the characteristics of fluid flow phenomenon in enclosures. This research paper investigates the fluid and heat transfer analysis of fluid flow inside a triangular cavity using natural element methodology (NEM). This Galerkin-based methodology has been introduced for a decade and almost demonstrated its efficiency in the numerical heat transfer analysis of problems in most engineering sciences. The fluid flow contains natural convection along with conduction and radiation heat transfer with medium's walls, which have absorbing, emitting, semitransparent, and nonscattering characteristics. The final results investigate the effects of radiative and natural convection heat transfer on the fluid flow pattern as expressed in Rayleigh number, stream function, strength of natural convection regime, etc., which are checked with other similar studies presented in the literature and shows how promising NEM can be as an efficient numerical approach to improve computational precision when dealing with fluid mechanic problems.

Natural Convection From Protruding Heat Sources in a Channel

2003 ◽  
Author(s):  
Tunc Icoz ◽  
Qinghua Wang ◽  
Yogesh Jaluria
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Rayleigh Scattering ◽  
Convection Heat Transfer ◽  
Separation Distance ◽  
Natural Convection Heat Transfer ◽  
Temperature Profiles ◽  
Heat Sources ◽  
Convection Heat

Natural convection has important implications in many applications like cooling of electronic equipment due to its low cost and easy maintenance. In the present study, two-dimensional natural convection heat transfer to air from multiple identical protruding heat sources, which simulate electronic components, located in a horizontal channel has been studied numerically. The fluid flow and temperature profiles, above the heating elements placed between an adiabatic lower plate and an isothermal upper plate, are obtained using numerical simulation. The effects of source temperatures, channel dimensions, openings, boundary conditions, and source locations on the heat transfer from and flow above the protruding sources are investigated. Different configurations of channel dimensions and separation distances of heat sources are considered and their effects on natural convection heat transfer characteristics are studied. The results show that the channel dimensions have a significant effect on fluid flow. However, their effects on heat transfer are found to be small. The separation distance is found to be an important parameter affecting the heat transfer rate. The numerical results of temperature profiles are compared with the experimental measurements performed using Filtered Rayleigh Scattering (FRS) technique in an earlier study, indicating good agreement. It is observed that adiabatic upper plate assumption leads to better temperature predictions than isothermal plate assumption.

Turbine Airfoil Heat Transfer Predictions Using CFD

2005 ◽  
Author(s):  
Anil K. Tolpadi ◽  
James A. Tallman ◽  
Lamyaa El-Gabry
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Turbulence Modeling ◽  
Three Dimensional ◽  
Numerical Approach ◽  
Navier Stokes ◽  
Design System ◽  
Computational Fluid Dynamics Cfd ◽  
Turbine Airfoils ◽  
Typical Design

Conventional heat transfer design methods for turbine airfoils use 2-D boundary layer codes (BLC) combined with empiricism. While such methods may be applicable in the mid span of an airfoil, they would not be very accurate near the end-walls and airfoil tip where the flow is very three-dimensional (3-D) and complex. In order to obtain accurate heat transfer predictions along the entire span of a turbine airfoil, 3-D computational fluid dynamics (CFD) must be used. This paper describes the development of a CFD based design system to make heat transfer predictions. A 3-D, compressible, Reynolds-averaged Navier-Stokes CFD solver with k-ω turbulence modeling was used. A wall integration approach was used for boundary layer prediction. First, the numerical approach was validated against a series of fundamental airfoil cases with available data. The comparisons were very favorable. Subsequently, it was applied to a real engine airfoil at typical design conditions. A discussion of the features of the airfoil heat transfer distribution is included.

scholarly journals Natural convection in a differentially heated enclosure with triangular roof

1970 ◽  
Vol 39 (1) ◽  
pp. 1-7 ◽  
Author(s):  
Sumon Saha ◽  
Noman Hasan ◽  
Chowdhury Md Feroz
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Natural Convection ◽  
Average Nusselt Number ◽  
Numerical Study ◽  
Convection Heat Transfer ◽  
Element Analysis ◽  
Left Wall ◽  
Square Enclosure

A numerical study has been carried out for laminar natural convection heat transfer within a two-dimensional modified square enclosure having a triangular roof. The vertical sidewalls are differentially heated considering a constant flux heat source strip is flush mounted with the left wall. The opposite wall is considered isothermal having a temperature of the surrounding fluid. The rest of the walls are adiabatic. Air is considered as the fluid inside the enclosure. The solution has been carried out on the basis of finite element analysis by a non-linear parametric solver to examine the heat transfer and fluid flow characteristics. Different heights of the triangular roof have been considered for the present analysis. Fluid flow fields and isotherm patterns and the average Nusselt number are presented for the Rayleigh numbers ranging from 103 to 106 in order to show the effects of these governing parameters. The average Nusselt number computed for the case of isoflux heating is also compared with the case of isothermal heating as available in the literature. The outcome of the present investigation shows that the convective phenomenon is greatly influenced by the inclined roof height. Keywords: Natural convection, triangular roof, Rayleigh number, isoflux heating. Doi:10.3329/jme.v39i1.1826 Journal of Mechanical Engineering, vol. ME39, No. 1, June 2008 1-7

Sign in / Sign up

Export Citation Format

Share Document