scholarly journals A Numerical Assessment of the Efficacy of a Topography Design with Increasing Gradient Complexity for Filtering Biofouling Material through the Membrane Module of a Water Treatment System

2021 ◽  
Vol 2120 (1) ◽  
pp. 012008
Author(s):  
WYM Felicia ◽  
LMZ Esmond
Keyword(s):  
Surface Modification ◽  
Water Treatment ◽  
Computational Fluid Dynamic ◽  
Research Study ◽  
Fluid Dynamic ◽  
High Potential ◽  
Treatment System ◽  
Water Treatment System ◽  
Marine Industry ◽  
Numerical Assessment

Abstract Biofouling can also be defined as the micro- / macro- organisms stuck on the surface that has been submerged in water. This is normally found in marine industry and water treatment industry. There are 3 ways of antifouling where the 3rd method surface modification was the main point to be focused on. Surface modification has high potential for antifouling performance and is not harmful to the ecosystem. In this research study was to find out the efficacy of antifouling performance with increasing the gradient complexity. The 2 models used were smooth topography and circular topography and have been manipulated and simulated with WorkBench 2020, Computational Fluid Dynamic (CFD). The results were simulated with the correct meshed and models. The simulated results were converged and 2 hydrodynamic variables; velocity and wall shear were used to check the efficacy of antifouling performance.

Improvement of Lake Water Quality by using Moving Rapid Water Treatment System

2018 ◽  
Vol 18 (1) ◽  
pp. 107-115 ◽  
Author(s):  
Kwang-Hee Lee ◽  
◽  
Min-Ho Kim ◽  
Nam-Woo An ◽  
Chul-hwi Park
Keyword(s):  
Water Quality ◽  
Water Treatment ◽  
Lake Water ◽  
Treatment System ◽  
Lake Water Quality ◽  
Water Treatment System

Multiplication of a Klebsiella pneumoniae Strain in Water at Low Concentrations of Substrates

1988 ◽  
Vol 20 (11-12) ◽  
pp. 117-123 ◽  
Author(s):  
D. van der Kooij ◽  
W. A. M. Hijnen
Keyword(s):  
Amino Acids ◽  
Water Treatment ◽  
Klebsiella Pneumoniae ◽  
Substrate Concentration ◽  
Treatment System ◽  
Water Treatment System ◽  
Low Concentrations ◽  
Ks Values ◽  
Substrate Concentrations

A K.pneumoniae strain, isolated from a water treatment system, was tested in growth measurements for its ability to multiply at substrate concentrations of a few micrograms per liter. The organism multiplied on mixtures of carbohydrates and amino acids at a substrate concentration of 1 µg of C of each compound per liter. Tests with individual compounds revealed that especially carbohydrates were utilized at low concentrations. The Ks values obtained for maltose and maltopentaose were 53 µg of C/l and 114 µg of C per liter, respectively. The significance of the growth of K.pneumoniae at low substrate concentrations is discussed.

High Performance Hybrid Capacitive Deionization with Ag-coated Activated Carbon Electrode

2021 ◽  
Author(s):  
Hongsik Yoon ◽  
Jiho Lee ◽  
Taijin Min ◽  
Gunhee Lee ◽  
Minsub Oh
Keyword(s):  
Activated Carbon ◽  
Water Treatment ◽  
Industrial Application ◽  
High Performance ◽  
Treatment System ◽  
Carbon Electrode ◽  
Capacitive Deionization ◽  
Water Treatment System

Capacitive deionization (CDI) has been highlighted as a promising electrochemical water treatment system. However, the low deionization capacity of CDI electrodes has been a major limitation for its industrial application,...

scholarly journals Development of a schwarzite-based moving bed 3D printed water treatment system for nanoplastic remediation

RSC Advances ◽  
2021 ◽  
Vol 11 (32) ◽  
pp. 19788-19796
Author(s):  
Bramha Gupta ◽  
Rushikesh S. Ambekar ◽  
Raphael M. Tromer ◽  
Partha Sarathi Ghosal ◽  
Rupal Sinha ◽  
...  
Keyword(s):  
Water Treatment ◽  
Aquatic Ecosystem ◽  
Treatment System ◽  
Environmental Challenges ◽  
Moving Bed ◽  
Water Treatment System ◽  
3D Printed ◽  
The Impact

The impact of micro and nanoplastic debris on our aquatic ecosystem is among the most prominent environmental challenges we face today.

scholarly journals Microbial Fouling of a Reverse Osmosis Municipal Water Treatment System

2008 ◽  
Vol 80 (8) ◽  
pp. 703-707 ◽  
Author(s):  
Steven J. Wright ◽  
Jeremy D. Semrau ◽  
David R. Keeney
Keyword(s):  
Water Treatment ◽  
Reverse Osmosis ◽  
Treatment System ◽  
Water Treatment System ◽  
Municipal Water

High Performance and N & P-Removable On-Site Domestic Waste Water Treatment System by Multi-Soil-Layering Method

1993 ◽  
Vol 27 (1) ◽  
pp. 31-40 ◽  
Author(s):  
T. Wakatsuki ◽  
H. Esumi ◽  
S. Omura
Keyword(s):  
Waste Water ◽  
Water Treatment ◽  
High Performance ◽  
Waste Water Treatment ◽  
Treatment System ◽  
Septic Tank ◽  
Horizontal Distance ◽  
Domestic Waste ◽  
Water Treatment System ◽  
Soil Layering

Multi-Soil-Layering (MSL) method was applied to make appropriate, but high performance and N & P-removable, on-site domestic waste water treatment system. The MSL soil unit is composed from soil layer mixed with 10∼25% of metal iron and pelletized jute. The MSL units were piled in a brick pattern at 5cm vertical and 10cm horizontal distance, which were surrounded by layers of Zeolite. Air can be supplied through porous pipes installed at adequate depths of the MSL system. The systems were tested using model houses. The waste waters, which were pretreated by septic tank to the level of SS 29-75, BOD 42-116, COD 32-56, T-N 29-86, and T-P 6-11 mg−l−1 respectively, could be treated at the rate of 100-850 1·m−2·d−1 without significant clogging. The mean concentrations of treated waters were SS 15, BOD 8.7, COD 11, T-N 6.8, and T-P 0.86 mg·1−1 respectively. Zeolite layers and brick pattern prevent clogging. Metal iron and jute pellets were effective to remove Phosphate and Nitrate. Intensive aeration assists decomposition of BOD, COD, and SS as well as nitrification, but decreases denitrif ication and phosphate fixation. The degree of purification could be controlled by setting adequate aeration.

Sign in / Sign up

Export Citation Format

Share Document