Distribution analysis of brittleness index, modulus young, modulus bulk, and Poisson’s ratio using the integration of refraction seismic method and MASW case study of Fasilkom UI’s new building

Abstract The multistage hydraulic fracturing is the best practice to stimulate unconventional hydrocarbon reservoirs for optimal production. Recent studies suggested that selective stimulation design could significantly increase production rates at a reduced cost rather than using non-selective geometric stages. An optimal design needs detailed logging and core information to selectively perforate and optimize the stimulation treatment. In most cases, the non-selective evenly spaced geometric stimulation design is used, primarily due to the time consuming and expensive conventional logging tools and techniques. In this article, a 3D wellbore friction model is used to estimate the effective downhole weight on bit (DWOB) from the drilling data, directional survey data and drill string information. The estimated DWOB is used as an input to the inverted rate of penetration (ROP) model along with other drilling data, drill bit specifications and reservoir specific formation constants, to calculate rock mechanical and reservoir properties including, compressive strength, Young’s modulus, porosity, permeability and Poisson’s ratio without the use of expensive downhole logging tools. The rock brittleness index is calculated from the relationship between Young’s modulus and Poisson’s ratio based on the definitions of rock brittleness used in recent years. The field data from horizontal drilling of three sample wells were used to investigate the geomechanical properties in the Montney shale formation and the lower Eagle Ford formation in North America. The calculated geomechanical properties were compared to the corresponding test analysis on cores. The authors investigated the rock brittleness index from the sample well data drilled horizontally in the lower Eagle Ford formation. This novel technology could help geologists and reservoir engineers better exploit unconventional reservoirs leading to optimal selective stimulations and greater net present value (NPV).

Download Full-text

Poisson's ratio in cubic materials

Proceedings of The Royal Society A Mathematical Physical and Engineering Sciences ◽

10.1098/rspa.2006.1726 ◽

2006 ◽

Vol 462 (2075) ◽

pp. 3385-3405 ◽

Cited By ~ 70

Author(s):

Andrew N Norris

Keyword(s):

Shear Modulus ◽

Poisson’S Ratio ◽

Young Modulus ◽

Poisson's Ratio ◽

Cubic Symmetry ◽

Cubic Crystals ◽

Cubic Materials ◽

Thallium Alloys

Expressions are given for the maximum and minimum values of Poisson's ratio ν for materials with cubic symmetry. Values less than −1 occur if and only if the maximum shear modulus is associated with the cube axis and is at least 25 times the value of the minimum shear modulus. Large values of occur in directions at which the Young modulus is approximately equal to one half of its 111 value. Such directions, by their nature, are very close to 111. Application to data for cubic crystals indicates that certain Indium Thallium alloys simultaneously exhibit Poisson's ratio less than −1 and greater than +2.

Download Full-text

Effect of trench-outer rise bending-related faulting on seismic Poisson's ratio and mantle anisotropy: a case study offshore of Southern Central Chile

Geophysical Journal International ◽

10.1111/j.1365-246x.2008.03716.x ◽

2008 ◽

Vol 173 (1) ◽

pp. 142-156 ◽

Cited By ~ 25

Author(s):

Eduardo Contreras-Reyes ◽

Ingo Grevemeyer ◽

Ernst R. Flueh ◽

Martin Scherwath ◽

Joerg Bialas

Keyword(s):

Poisson’S Ratio ◽

Poisson's Ratio ◽

Central Chile ◽

Outer Rise ◽

Southern Central ◽

Mantle Anisotropy

Download Full-text

Reservoir Subdivision and Prediction of Poisson's Ratio According to Wireline Data (Hawaz Reservoir, Libya): Case Study

Journal of Geology & Geosciences ◽

10.4172/2329-6755.1000116 ◽

2012 ◽

Vol 02 (02) ◽

Author(s):

Bahia M Ben Ghawar

Keyword(s):

Poisson’S Ratio ◽

Poisson's Ratio

Download Full-text

Influence of the Poisson's ratio on the efficiency of viscoelastic damping treatments

INTER-NOISE and NOISE-CON Congress and Conference Proceedings ◽

10.3397/in-2021-2521 ◽

2021 ◽

Vol 263 (3) ◽

pp. 3790-3794

Author(s):

Lucie Rouleau ◽

Isadora Ruas Henriques ◽

Jean-François Deü

Keyword(s):

Poisson’S Ratio ◽

Poisson Ratio ◽

Young Modulus ◽

Indirect Measurement ◽

Poisson's Ratio ◽

Viscoelastic Layer ◽

Temperature Dependent ◽

Complex Shear ◽

Damping Treatments

An efficient way of mitigating noise and vibration is to embed viscoelastic patches into the host structure. Viscoelastic properties are of significant importance in determining the performance of the passive damping treatment. The behaviour of homogeneous isotropic materials is described by two elastic constants (generally the Young modulus and the Poisson ratio, or the shear and bulk moduli), which are frequency- and temperature-dependent in the case of viscoelastic materials. In practice, the Poisson's ratio is often considered as independent of temperature and frequency. One goal of this work is to numerically evaluate the validity of this assumption and its limitations (frequency range, thickness of the viscoelastic layer). To this end, a thermo-mechanical characterization of a viscoelastic material is carried out by dynamic measurements of the complex shear and bulk moduli, allowing the indirect measurement of the frequency- and temperature-dependent Poisson's ratio. Moreover, the measurements of the Poisson's ratio (direct or indirect) can lead to considerable uncertainties. For instance, large discrepancies have been observed when characterizing the Poisson's ratio of polymer foams. Another goal of this work is to investigate the influence of those uncertainties on the dynamic response of a damped structure.

Download Full-text

On a method for determination of Poisson’s ratio and Young modulus of a material

MATEC Web of Conferences ◽

10.1051/matecconf/201822603027 ◽

2018 ◽

Vol 226 ◽

pp. 03027 ◽

Cited By ~ 1

Author(s):

Vladimir B. Zelentsov ◽

Evgeniy V. Sadyrin ◽

Aleksandr G. Sukiyazov ◽

Nataliya Yu. Shubchinskaya

Keyword(s):

Contact Problem ◽

Young’S Modulus ◽

Contact Area ◽

Poisson’S Ratio ◽

Young's Modulus ◽

Young Modulus ◽

Theory Of Elasticity ◽

Poisson's Ratio ◽

Parabolic Cylinder ◽

And Control

On the base of modernized NanoTest 600 Platform 3 indentation method is proposed to determine elastic parameters – Poisson’s ratio and Young’s modulus – of a material while loading in an elastic region. The experiment is based on procedure: lateral surface of indenter tip with the shape of parabolic cylinder penetrates into the specimen. NanoTest 600 was equipped by additional optics, backlight and device for spatial orientation of the specimen. This modernization allows to control the process of the indenter penetration both along its length and from the edges, so that one can observe and measure the width of the contact area and control the depth of the indentation area in a sample material. Mathematical modeling of the indentation process was conducted within the framework of plane theory of elasticity. This required solution of the contact problem on indentation of a rigid indenter with a parabolic shape into an elastic strip coupled with a non-deformable substrate. The fulfilment of condition of zeroing the contact stresses at the edges of the indenter with a known width of the contact area allows to determine the Poisson’s ratio, and condition of static equilibrium of the contact problem helps to find Young’s modulus of a strip material.

Download Full-text

Non-Destructive Measurement of the Density of Thin Coatings by a Combination of Instrumented (Nano) Indentation and Acoustical Techniques.

MRS Proceedings ◽

10.1557/proc-841-r12.8 ◽

2004 ◽

Vol 841 ◽

Cited By ~ 2

Author(s):

Nigel M. Jennett ◽

Giles Aldrich-Smith ◽

Antony S. Maxwell

Keyword(s):

Poisson’S Ratio ◽

Poisson's Ratio ◽

Coating Properties ◽

Thin Coatings ◽

Nano Indentation ◽

Nano Crystalline ◽

Plain Strain ◽

Destructive Measurement ◽

Non Destructive

ABSTRACTNanoindentation is used to provide a measurement of coating plain strain modulus. The coating properties are then measured by surface acoustic wave spectroscopy (SAWS). It is shown that, by exploiting the relative insensitivity of the SAWS acoustical model to Poisson's ratio, it is possible to measure either the thickness or the density of a thin coating given the input of the other. Furthermore, the indentation and acoustical tests are non-destructive and the resulting value of thickness or density is of high precision. A case study is presented for the measurement of density for a 250 nm thick nano-crystalline Niobium coating on a Si (001) substrate. The density is found to be ρ = 8.4 ± 0.3 g cm−3, about 2 % below bulk values but the modulus is found to be only 85 GPa (for a Poisson's ratio of 0.4), which is 18 % below bulk.

Download Full-text