scholarly journals Hybridizing Micro - B4C With Carbon nanotubes to Enhance The Mechanical Properties of Aluminium Matrix Composites

2017 ◽  
Vol 225 ◽  
pp. 012234
Author(s):  
Mohamed Zakaulla ◽  
R Arjun ◽  
Muzakkir Ahmed Khan ◽  
K Nadeem Pasha ◽  
Salim Sharieff
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Aluminium Matrix ◽  
Matrix Composites ◽  
Aluminium Matrix Composites

scholarly journals Fabrication and Performance Test of Aluminium Alloy-Rice Husk Ash Hybrid Metal Matrix Composite as Industrial and Construction Material

2017 ◽  
Vol 2 (4) ◽  
pp. 94-102 ◽  
Author(s):  
Md. Rahat Hossain ◽  
Md. Hasan Ali ◽  
Md. Al Amin ◽  
Md. Golam Kibria ◽  
Md. Shafiul Ferdous
Keyword(s):  
Mechanical Properties ◽  
Aluminium Alloy ◽  
Compressive Stress ◽  
Rice Husk ◽  
Performance Test ◽  
Rice Husk Ash ◽  
Hybrid Composites ◽  
Aluminium Matrix ◽  
Matrix Composites ◽  
Aluminium Matrix Composites

Aluminium matrix composites (AMCs) used extensively in various engineering fields due to their exceptional mechanical properties. In this present study, aluminium matrix composites (AMCs) such as aluminium alloy (A356) reinforced with rice husk ash particles (RHA) are made to explore the possibilities of reinforcing aluminium alloy. The stir casting method was applied to produce aluminium alloy (A356) reinforced with various amounts of (2%, 4%, and 6%) rice husk ash (RHA) particles. Physical treatment was carried out before the rice husk ash manufacturing process. The effect of mechanical strength of the fabricated hybrid composite was investigated. Therefore, impact test, tensile stress, compressive stress, and some other tests were carried out to analyse the mechanical properties. From the experimental results, it was found that maximum tensile, and compressive stress were found at 6% rice husk ash (RHA) and aluminium matrix composites (AMCs). In future, the optimum percentages of rice husk ash (RHA) to fabricate the hybrid composites will be determined. Also, simulation by finite element method (FEM) will be applied for further investigation.

scholarly journals Mechanical and Tribological Properties of Ti3Al Reinforced Aluminium Matrix Composites

2004 ◽  
Vol 13 (1) ◽  
pp. 096369350401300 ◽  
Author(s):  
D. Busquets-Mataix ◽  
N. Martvnez ◽  
M.D. Salvador ◽  
V. Amigσ
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Powder Metallurgy ◽  
Aluminium Matrix ◽  
Wear Behaviour ◽  
Matrix Composites ◽  
High Tensile Strength ◽  
Tribological Behaviour ◽  
Aluminium Matrix Composites ◽  
Mechanical And Tribological Properties

Mechanical properties and tribological behaviour of AA6061 and AA7015 aluminium matrix composites reinforced with Ti3Al intermetallics have been studied. Processing of the composites consisted of a combination of powder metallurgy and extrusion techniques. High tensile strength was attained on both alloys, although composites did not improve these properties. Also ductility was impaired on composites, but values above 10% were obtained in every case. Regarding friction coefficient, all composites showed a lower value with respect to base alloys, being lower as the amount of reinforcement increased. Wear behaviour of composites was improved.

scholarly journals Technological Relevance, Research Prospect and Applications of Aluminium-Silicon Carbide-Graphite Hybrid Metal Matrix Composites for Thermal Characterization

2018 ◽  
Vol 8 (02) ◽  
Author(s):  
S A Mohan Krishna ◽  
T N Shridhar ◽  
L Krishnamurthy ◽  
K B Vinay ◽  
G V Naveen Prakash
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Silicon Carbide ◽  
Thermal Expansion ◽  
Hybrid Composites ◽  
Coefficient Of Thermal Expansion ◽  
Aluminium Matrix ◽  
Matrix Composites ◽  
Aluminium Matrix Composites ◽  
Research Prospect

Aluminium matrix composites belong to the family of materials whose mechanical, tribological, thermal and electrical properties can be customized effectively. Most of the commercial work on MMCs has been highlighted on Aluminium as the matrix material. The combination of light weight, environmental resistance and beneficial mechanical properties has made Aluminium alloys exceedingly popular; these properties also make Aluminium best suited for use as a matrix metal. The thermophysical properties of these composites can be tailor made and have excellent specific mechanical properties. These composites can be fabricated with ease. Aluminium matrix composites reinforced with the particles of Silicon Carbide possess high yield strength, low coefficient of thermal expansion or thermal expansivity, high modulus of elasticity and excellent wear resistance by maintaining volume proportion up to 20%. Aluminium hybrid composites can be customized to provide moderate Coefficient of Thermal Expansion (CTE) and high thermal conductivity that are favorable for the applications pertaining to thermal management equipment. However, it is necessary to evaluate different percentage combinations of reinforcements with matrix Aluminium to check for thermal stability and to measure thermal conductivity and coefficient of thermal expansion. It is expected that, Aluminium-Silicon Carbide-Graphite hybrid composites can be used as load bearing material for the above applications. In this paper, a review about the said hybrid composites to investigate thermal properties for engineering applications have been discussed based on its technological relevance, applications and research prospect.

Sign in / Sign up

Export Citation Format

Share Document