scholarly journals Nickel extraction from nickel matte

2018 ◽  
Vol 285 ◽  
pp. 012001
Author(s):  
R Subagja
Keyword(s):  
Nickel Extraction ◽  
Nickel Matte

scholarly journals Modelling Global Nickel Mining, Supply, Recycling, Stocks-in-Use and Price Under Different Resources and Demand Assumptions for 1850–2200

2021 ◽  
Author(s):  
Anna Hulda Olafsdottir ◽  
Harald Ulrik Sverdrup
Keyword(s):  
Market Prices ◽  
Nickel Extraction ◽  
Price Increases ◽  
Nickel Mining ◽  
Ore Grades ◽  
Recoverable Resources ◽  
Business As Usual ◽  
Ore Grade

AbstractThe long-term supply of nickel to society was assessed with the WORLD7 model for the global nickel cycle, using new estimates of nickel reserves and resources, indicating that the best estimate of the ultimately recoverable resources for nickel is in the range of 650–720 million ton. This is significantly larger than earlier estimates. The extractable amounts were stratified by extraction cost and ore grade in the model, making them extractable only after price increases and cost reductions. The model simulated extraction, supply, ore grades, and market prices. The assessment predicts future scarcity and supply problems after 2100 for nickel. The model reconstructs observed extraction, supply and market prices for the period 1850–2020, and is used to simulate development for the period 2020–2200. The quality of nickel ore has decreased significantly from 1850 to 2020 and will continue to do so in the future according to the simulated predictions from the WORLD7 model. For nickel, extraction rates are suggested to reach their maximum value in 2050, and that most primary nickel resources will have been exhausted by 2130. After 2100, the supply per capita for nickel will decline towards exhaustion if business-as-usual is continuing. This will be manifested as reduced supply and increased prices. The peak year can be delayed by a maximum of 100 years if recycling rates are improved significantly and long before scarcity is visible.

Alternative Resources for Producing Nickel Matte - Laterite Ores and Polymetallic Nodules

2021 ◽  
pp. 1-14
Author(s):  
Kun Su ◽  
Feng Wang ◽  
John Parianos ◽  
Zhixiang Cui ◽  
Baojun Zhao ◽  
...  
Keyword(s):  
Nickel Matte ◽  
Laterite Ores ◽  
Polymetallic Nodules

Selective Leaching Nickel from the Pre-Reduced Limonitic Laterite Ore at Atmospheric Pressure

2012 ◽  
Vol 560-561 ◽  
pp. 494-498
Author(s):  
Yong Feng Chang ◽  
Chuan Lin Fan ◽  
Bin Chuan Li ◽  
Xiu Jing Zhai ◽  
Ting An Zhang
Keyword(s):  
Atmospheric Pressure ◽  
Ph Value ◽  
Test Results ◽  
Selective Leaching ◽  
Nickel Extraction ◽  
Extraction Degree ◽  
Leaching Solution ◽  
Novel Method ◽  
Leaching Condition ◽  
Laterite Ore

In this paper a novel method for selective leaching nickel from pre-reduced laterite ore at atmospheric pressure was reported. The reduced calcine was leached in thin acid liquor to liberate the nickel and iron together firstly. By properly controlling the leaching condition, the leached iron ion could hydrolyze as goethite precipitate and regenerate the acid consumed in the leaching procedure. Finally, the nickel is selectively extracted into the leaching solution. The main factors in the leaching process, such as reduction degree of the laterite ore, acidity of the leaching solution were investigated as influence on the nickel extraction. The test results showed that selectively leaching of nickel could be achieved with an extraction degree up to 90% by reducing most of the iron in the lateritic ore to wuestite and controlling the pH value of the leaching solution below 2.5.

scholarly journals ANALISIS KUALITAS AIR LINDIAN SISA PENGOLAHAN NIKEL (FERRONICKEL, NICKEL MATTE DAN NICKEL PIG IRON)

2021 ◽  
Vol 7 (1) ◽  
pp. 15
Author(s):  
Muhammad Ikra Rambu ◽  
Firman Nullah Yusuf ◽  
Alfian Nawir ◽  
Muhammad Hardin Wakila
Keyword(s):  
Pig Iron ◽  
Nickel Matte

scholarly journals Studies on Nickel Matte by X-Ray Diffraction (1st Report)

1958 ◽  
Vol 74 (845) ◽  
pp. 927-933
Author(s):  
Yasuo ITAYA ◽  
Hajime SHIMADA ◽  
Junpei ANDO
Keyword(s):  
X Ray Diffraction ◽  
X Ray ◽  
Nickel Matte

scholarly journals Feasibility of nickel extraction from Indian chromite overburden by solid state reduction and smelting route

2020 ◽  
Vol 56 (2) ◽  
pp. 229-235
Author(s):  
P. Ganesh ◽  
Dishwar Kumar ◽  
S. Agrawal ◽  
Mandal Kumar ◽  
N. Sahu ◽  
...  
Keyword(s):  
Solid State ◽  
Horizontal Tube ◽  
Low Grade ◽  
State Reduction ◽  
Nickel Extraction ◽  
Reducing Atmosphere ◽  
Chromite Overburden ◽  
Solid State Reduction ◽  
Horizontal Tube Furnace ◽  
Direct Smelting

The present work demonstrates the extraction of nickel from low-grade chromite overburden by using solid state reduction and direct smelting route. Goethite & Quartz are present as major phases whereas chromite, hematite were identified as minor phases in the mineral. Solid state reduction of pellets were carried out inside a horizontal tube furnace at 1000?C, 1200?C, 1400?C for 30, 60, 90 and 120 minutes respectively with creating reducing atmosphere. Pellets of varying basicity (i.e. 0.5, 0.6, 0.7, 0.8 and 0.9) were used directly in the EAF for smelting studies. Highest percent of nickel (2%) having ~ 91% recovery were obtained in solid state reduction route for pellets which was reduced at 1400?C for 120 minute. Similar recovery (~90%) of nickel was obtained inside the ingot (0.67% Ni ) by using pellets of 0.9 basicity through smelting route. From the present investigation, it could be concluded that the solid state reduction as well as smelting routes are feasible for the recovery of nickel from low grade chromite overburden. The production of nickel pig (low grade ferronickel) could also be feasible by smelting route.

Sign in / Sign up

Export Citation Format

Share Document