scholarly journals Conductive natural and waste rubbers composites-loaded with lead powder as environmental flexible gamma radiation shielding material

2020 ◽  
Vol 7 (10) ◽  
pp. 105309
Author(s):  
Ahmed M El-Khatib ◽  
A S Doma ◽  
Mohamed S Badawi ◽  
Asmaa E Abu-Rayan ◽  
N S Aly ◽  
...  
Keyword(s):  
Gamma Radiation ◽  
Radiation Shielding ◽  
Lead Powder ◽  
Shielding Material

Comparison of Lead, Copper and Aluminium as Gamma Radiation Shielding Material through Experimental Measurements and Simulation Using MCNP Version 4c

2018 ◽  
Vol 9 (08) ◽  
pp. 20193-20206 ◽  
Author(s):  
Md. Akhlak Bin Aziz ◽  
Md. Faisal Rahman ◽  
Md. Mahidul Haque Prodhan
Keyword(s):  
Gamma Radiation ◽  
Sodium Iodide ◽  
Experimental Approach ◽  
Radiation Shielding ◽  
Test Material ◽  
Simulation Techniques ◽  
Radiation Sources ◽  
Simulation Monte Carlo ◽  
Shielding Material ◽  
Code Version

The paper compares  Lead, Copper and Aluminium as gamma radiation shielding material using both experimental and simulation techniques. Cs- 137 (662KeV), Na-22 (511KeV) and Na- 22(1274KeV) were used as gamma radiation sources and a sodium iodide (NaI) detector was used to detect the radiation. Variations were noted for detected gamma count rates by changing shielding material thickness. In the experimental approach, thickness was varied by placing sheets of a particular test material one by one. For simulation, Monte Carlo n- Particle (MCNP) code version 4c was used and the geometry of the whole experimental setup was plotted in it. The results were then compared for each test material and it was found that lead is the best shielding material for gamma radiation followed by copper and aluminium.

scholarly journals The gamma radiation shielding effectiveness of textured steel yarn based fabrics

2018 ◽  
Vol 69 (01) ◽  
pp. 44-49
Author(s):  
ÖZDEMIR HAKAN ◽  
CAMGÖZ BERKAY
Keyword(s):  
Gamma Radiation ◽  
Structural Characteristics ◽  
Woven Fabrics ◽  
Radiation Shielding ◽  
Weft Yarn ◽  
Personal Protection ◽  
Shielding Effectiveness ◽  
X Ray ◽  
Lead Shielding ◽  
Shielding Material

Lead aprons that are lead-shielding products are generally used for personal protection of physicians and patients from X-ray (gamma) radiation during medical operations; lead has environmental disadvantages, with high toxicity, though. Therefore, the aim of this research was to produce an environmentally friendly and flexible textile-based radiation shielding material. In this work, 2/2 twill, 3/1 twill, Herringbone, Whipcord, which are twill derivatives, Barathea and Crêpe woven fabrics, which are sateen derivatives, woven with textured steel yarns, which have soft feeling and flexibility, and gamma radiation shielding effectiveness of these fabrics were investigated and were not studied in the references. The effects of fabric structural characteristics such as weave, conductive weft yarn density, fabric thickness and porosity on these properties were analysed graphically and statistically. It is observed that with the biggest thicknesses and lowest porosities, Barathea and Crêpe woven fabrics performed better gamma radiation shielding performance than other woven fabrics. The samples F1 and E1, woven with Barathea and Crêpe weave, have the highest gamma radiation shielding effectiveness, thanks to the highest fabric thicknesses and lowest porosities. In addition, the increases of textured steel yarn density improved the gamma radiation shielding effectiveness of woven fabrics.

Gamma radiation shielding effectiveness of cellular woven fabrics

2016 ◽  
Vol 47 (5) ◽  
pp. 712-726 ◽  
Author(s):  
Hakan Özdemir ◽  
Berkay Camgöz
Keyword(s):  
Gamma Radiation ◽  
Structural Characteristics ◽  
Woven Fabrics ◽  
Radiation Shielding ◽  
Woven Fabric ◽  
Weft Yarn ◽  
Shielding Effectiveness ◽  
Fabric Thickness ◽  
Core Yarn ◽  
Shielding Material

Lead-shielding products, such as lead aprons, are important materials for personal protection of physicians and patients from X-ray (gamma) radiation during medical operations. However, lead has environmental disadvantages such as high toxicity. The aim of this study was to manufacture an environmentally friendly and flexible textile-based radiation shielding material. In this work, 3/1 twill and some cellular woven fabrics were produced with conductive core yarns, and gamma radiation shielding effectiveness of these cellular woven fabrics were investigated and compared with that of the 3/1 twill woven fabric, which are commonly used as uniforms and were not studied previously in any other literature. The effects of weave on the structural characteristics of fabric such as the conductive weft yarn density, fabric thickness, and fullness were analyzed graphically and statistically. It is observed that with indenting and protruding, structure cellular woven fabrics performed better gamma radiation shielding performance than the 3/1 twill woven fabrics. The sample B1, woven with cellular weave 1, has the highest gamma radiation shielding effectiveness, thanks to the highest fabric thickness. In addition, the increase in the conductive core yarn density improved the gamma radiation shielding effectiveness of the woven fabrics.

Consistency and shielding efficiency of cement-bitumen composite for use as gamma-radiation shielding material

2021 ◽  
Vol 137 ◽  
pp. 103764
Author(s):  
Hosam M. Saleh ◽  
Ibrahim I. Bondouk ◽  
Elsayed Salama ◽  
Heba A. Esawii
Keyword(s):  
Gamma Radiation ◽  
Radiation Shielding ◽  
Shielding Material

scholarly journals Tungsten-based material as promising new lead-free gamma radiation shielding material in nuclear medicine

2020 ◽  
Vol 78 ◽  
pp. 48-57 ◽  
Author(s):  
Nadin Jamal AbuAlRoos ◽  
Mira Natasha Azman ◽  
Noorfatin Aida Baharul Amin ◽  
Rafidah Zainon
Keyword(s):  
Nuclear Medicine ◽  
Gamma Radiation ◽  
Radiation Shielding ◽  
Lead Free ◽  
Shielding Material

scholarly journals Analysis of Shielding Performance of Radiation-Shielding Materials According to Particle Size and Clustering Effects

2021 ◽  
Vol 11 (9) ◽  
pp. 4010
Author(s):  
Seon-Chil Kim
Keyword(s):  
Particle Size ◽  
Polymer Material ◽  
Energy Region ◽  
High Energy ◽  
Radiation Shielding ◽  
High Energy Region ◽  
Particle Structure ◽  
Effect Of Particle Size ◽  
Extensive Body ◽  
Shielding Material

In the field of medical radiation shielding, there is an extensive body of research on process technologies for ecofriendly shielding materials that could replace lead. In particular, the particle size and arrangement of the shielding material when blended with a polymer material affect shielding performance. In this study, we observed how the particle size of the shielding material affects shielding performance. Performance and particle structure were observed for every shielding sheet, which were fabricated by mixing microparticles and nanoparticles with a polymer material using the same process. We observed that the smaller the particle size was, the higher both the clustering and shielding effects in the high-energy region. Thus, shielding performance can be improved. In the low-dose region, the effect of particle size on shielding performance was insignificant. Moreover, the shielding sheet in which nanoparticles and microsized particles were mixed showed similar performance to that of the shielding sheet containing only microsized particles. Findings indicate that, when fabricating a shielding sheet using a polymer material, the smaller the particles in the high-energy region are, the better the shielding performance is. However, in the low-energy region, the effect of the particles is insignificant.

Characterization and measurement of gamma radiation shielding of a new tungsten-lignin composite

2021 ◽  
pp. 002199832110293
Author(s):  
Armando Cirilo de Souza ◽  
Flavio Aristone ◽  
Adriana Fatima Gomes Gouvea ◽  
Hedielly Brasil Fernandes ◽  
Adailto Miyai ◽  
...  
Keyword(s):  
Gamma Radiation ◽  
Kraft Lignin ◽  
Temperature Treatment ◽  
Radiation Shielding ◽  
X Rays ◽  
Clear Indication ◽  
Pure Tungsten ◽  
Metal Organic ◽  
Gamma Radiations ◽  
Scanning Electron

This research has been carried on to analyze the capability of a new composite to be effectively used as shielding of gamma radiation. The preparation of a metal-organic composite formed by tungsten and Kraft lignin is presented. Samples have been characterized through X-rays and scanning electron microscopy measurements. The results led to the study of the different phase formations. The microscopic analyzes indicate that two different phases are present in the composite. The absence of oxidation in the process even after the temperature treatment imposed to form the sample has also been noticed. Measurements of the attenuation have been performed to study its ability to absorb gamma radiation. A sample of cobalt 60 (Co-60), for which the peak energies are at 1173 keV and 1332 keV, was used as a source of gamma radiation in the experiment of attenuation. The measured attenuation of gamma radiations when the composite is placed to act as a shield is only 16% smaller than the attenuation obtained for standard pure tungsten. This is a clear indication that the new metal-organic composite is suitable for the fabrication of devices dedicated to shielding radiation, with the advantage of being easier to manipulate.

Sign in / Sign up

Export Citation Format

Share Document