scholarly journals A Mutational Analysis Identifies Three Functional Regions of the Spindle Pole Component Spc110p in Saccharomyces cerevisiae

1997 ◽  
Vol 8 (12) ◽  
pp. 2575-2590 ◽  
Author(s):  
Holly A. Sundberg ◽  
Trisha N. Davis
Keyword(s):  
Mutational Analysis ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Spindle Pole ◽  
Amino Terminus ◽  
Temperature Sensitive ◽  
Functional Regions ◽  
Region I ◽  
Region Ii ◽  
Pole Component

The central coiled coil of the essential spindle pole component Spc110p spans the distance between the central and inner plaques of theSaccharomyces cerevisiae spindle pole body (SPB). The carboxy terminus of Spc110p, which binds calmodulin, resides at the central plaque, and the amino terminus resides at the inner plaque from which nuclear microtubules originate. To dissect the functions of Spc110p, we created temperature-sensitive mutations in the amino and carboxy termini. Analysis of the temperature-sensitivespc110 mutations and intragenic complementation analysis of the spc110 alleles defined three functional regions of Spc110p. Region I is located at the amino terminus. Region II is located at the carboxy-terminal end of the coiled coil, and region III is the previously defined calmodulin-binding site. Overexpression ofSPC98 suppresses the temperature sensitivity conferred by mutations in region I but not the phenotypes conferred by mutations in the other two regions, suggesting that the amino terminus of Spc110p is involved in an interaction with the γ-tubulin complex composed of Spc97p, Spc98p, and Tub4p. Mutations in region II lead to loss of SPB integrity during mitosis, suggesting that this region is required for the stable attachment of Spc110p to the central plaque. Our results strongly argue that Spc110p links the γ-tubulin complex to the central plaque of the SPB.

scholarly journals A Genetic Analysis of Interactions with Spc110p Reveals Distinct Functions of Spc97p and Spc98p, Components of the Yeast γ-Tubulin Complex

1998 ◽  
Vol 9 (8) ◽  
pp. 2201-2216 ◽  
Author(s):  
Thu Nguyen ◽  
Dani B.N. Vinh ◽  
Douglas K. Crawford ◽  
Trisha N. Davis
Keyword(s):  
Spindle Pole Body ◽  
Spindle Pole ◽  
Amino Terminus ◽  
Temperature Sensitive ◽  
Microtubule Organizing Center ◽  
Synthetic Lethal ◽  
Lethal Phenotype ◽  
Amino Terminal ◽  
N Terminus ◽  
Two Hybrid

The spindle pole body (SPB) in Saccharomyces cerevisiae functions as the microtubule-organizing center. Spc110p is an essential structural component of the SPB and spans between the central and inner plaques of this multilamellar organelle. The amino terminus of Spc110p faces the inner plaque, the substructure from which spindle microtubules radiate. We have undertaken a synthetic lethal screen to identify mutations that enhance the phenotype of the temperature-sensitive spc110–221 allele, which encodes mutations in the amino terminus. The screen identified mutations inSPC97 and SPC98, two genes encoding components of the Tub4p complex in yeast. The spc98–63allele is synthetic lethal only with spc110 alleles that encode mutations in the N terminus of Spc110p. In contrast, thespc97 alleles are synthetic lethal withspc110 alleles that encode mutations in either the N terminus or the C terminus. Using the two-hybrid assay, we show that the interactions of Spc110p with Spc97p and Spc98p are not equivalent. The N terminus of Spc110p displays a robust interaction with Spc98p in two different two-hybrid assays, while the interaction between Spc97p and Spc110p is not detectable in one strain and gives a weak signal in the other. Extra copies of SPC98 enhance the interaction between Spc97p and Spc110p, while extra copies of SPC97interfere with the interaction between Spc98p and Spc110p. By testing the interactions between mutant proteins, we show that the lethal phenotype in spc98–63 spc110–221 cells is caused by the failure of Spc98–63p to interact with Spc110–221p. In contrast, the lethal phenotype in spc97–62 spc110–221 cells can be attributed to a decreased interaction between Spc97–62p and Spc98p. Together, these studies provide evidence that Spc110p directly links the Tub4p complex to the SPB. Moreover, an interaction between Spc98p and the amino-terminal region of Spc110p is a critical component of the linkage, whereas the interaction between Spc97p and Spc110p is dependent on Spc98p.

scholarly journals Nuf2, a spindle pole body-associated protein required for nuclear division in yeast.

1994 ◽  
Vol 125 (4) ◽  
pp. 853-866 ◽  
Author(s):  
M A Osborne ◽  
G Schlenstedt ◽  
T Jinks ◽  
P A Silver
Keyword(s):  
Nuclear Division ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Temperature Shift ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Yeast Saccharomyces Cerevisiae ◽  
Culture Cells ◽  
Pole Body ◽  
Associated Proteins

The NUF2 gene of the yeast Saccharomyces cerevisiae encodes an essential 53-kd protein with a high content of potential coiled-coil structure similar to myosin. Nuf2 is associated with the spindle pole body (SPB) as determined by coimmunofluorescence with known SPB proteins. Nuf2 appears to be localized to the intranuclear region and is a candidate for a protein involved in SPB separation. The nuclear association of Nuf2 can be disrupted, in part, by 1 M salt but not by the detergent Triton X-100. All Nuf2 can be removed from nuclei by 8 M urea extraction. In this regard, Nuf2 is similar to other SPB-associated proteins including Nufl/SPC110, also a coiled-coil protein. Temperature-sensitive alleles of NUF2 were generated within the coiled-coil region of Nuf2 and such NUF2 mutant cells rapidly arrest after temperature shift with a single undivided or partially divided nucleus in the bud neck, a shortened mitotic spindle and their DNA fully replicated. In sum, Nuf2 is a protein associated with the SPB that is critical for nuclear division. Anti-Nuf2 antibodies also recognize a mammalian 73-kd protein and display centrosome staining of mammalian tissue culture cells suggesting the presence of a protein with similar function.

scholarly journals Mutational Analysis Reveals a Role for the C Terminus of the Proteasome Subunit Rpt4p in Spindle Pole Body Duplication inSaccharomyces cerevisiae

Genetics ◽  
2002 ◽  
Vol 162 (2) ◽  
pp. 705-720 ◽  
Author(s):  
Heather B McDonald ◽  
Astrid Hoes Helfant ◽  
Erin M Mahony ◽  
Shaun K Khosla ◽  
Loretta Goetsch
Keyword(s):  
Cell Cycle ◽  
Mutational Analysis ◽  
Genetic Interaction ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Spindle Pole ◽  
Terminal Region ◽  
Wild Type ◽  
Pole Body ◽  
C Terminus

AbstractThe ubiquitin/proteasome pathway plays a key role in regulating cell cycle progression. Previously, we reported that a conditional mutation in the Saccharomyces cerevisiae gene RPT4/PCS1, which encodes one of six ATPases in the proteasome 19S cap complex/regulatory particle (RP), causes failure of spindle pole body (SPB) duplication. To improve our understanding of Rpt4p, we created 58 new mutations, 53 of which convert clustered, charged residues to alanine. Virtually all mutations that affect the N-terminal region, which contains a putative nuclear localization signal and coiled-coil motif, result in a wild-type phenotype. Nine mutations that affect the central ATPase domain and the C-terminal region confer recessive lethality. The two conditional mutations identified, rpt4-145 and rpt4-150, affect the C terminus. After shift to high temperature, these mutations generally cause cells to progress slowly through the first cell cycle and to arrest in the second cycle with large buds, a G2 content of DNA, and monopolar spindles, although this phenotype can vary depending on the medium. Additionally, we describe a genetic interaction between RPT4 and the naturally polymorphic gene SSD1, which in wild-type form modifies the rpt4-145 phenotype such that cells arrest in G2 of the first cycle with complete bipolar spindles.

scholarly journals Spc42p: a phosphorylated component of the S. cerevisiae spindle pole body (SPD) with an essential function during SPB duplication.

1996 ◽  
Vol 132 (5) ◽  
pp. 887-901 ◽  
Author(s):  
A D Donaldson ◽  
J V Kilmartin
Keyword(s):  
Nuclear Membrane ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Spindle Pole ◽  
Normal Function ◽  
Temperature Sensitive ◽  
Pole Body ◽  
Polymeric Layer ◽  
Essential Function ◽  
Mutant Cells

The 42-kD component of the S. cerevisiae spindle pole body (SPB) localizes to the electron-dense central plaque of the SPB. We have cloned the corresponding gene SPC42 (spindle pole component) and show that it is essential. Seven temperature-sensitive (ts) mutants in SPC42 were prepared by error-prone PCR. We found that a change to a proline residue in a potential coiled-coil region of Spc42p was responsible for the ts phenotype in at least three alleles, suggesting that formation of the coiled-coil is essential in normal function. The mutant cells showed a phenotype of predominantly single or bilobed SPBs often with an accumulation of unstructured electron-dense material associated with the bridge structure adjacent to the SPB. This phenotype suggests a defect in SPB duplication. This was confirmed by examining synchronized mutant cells that lose viability when SPB duplication is attempted. Spc42p is a phosphoprotein which shows some cell cycle-regulated phosphorylation. Overexpression of Spc42p causes the formation of a disc- or dome-shaped polymer composed of phosphorylated Spc42p, which is attached to the central plaque and associated with the outer nuclear membrane. Taken together, these data suggest that Spc42p forms a polymeric layer at the periphery of the SPB central plaque which has an essential function during SPB duplication and may facilitate attachment of the SPB to the nuclear membrane.

scholarly journals SPC72: a spindle pole component required for spindle orientation in the yeast Saccharomyces cerevisiae

1998 ◽  
Vol 111 (18) ◽  
pp. 2809-2818 ◽  
Author(s):  
S. Soues ◽  
I.R. Adams
Keyword(s):  
Cell Cycle ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Spindle Pole ◽  
Spindle Orientation ◽  
Yeast Saccharomyces Cerevisiae ◽  
Spindle Positioning ◽  
Pole Body ◽  
Per Se ◽  
Pole Component

The monoclonal antibody 78H6 recognises an 85 kDa component of the yeast spindle pole body. Here we identify and characterise this component as Spc72p, the product of YAL047C. The sequence of SPC72 contains potential coiled-coil domains; its overexpression induced formation of large polymers that were strictly localised at the outer plaque and at the bridge of the spindle pole body. Immunoelectron microscopy confirmed that Spc72p was a component of these polymers. SPC72 was found to be non-essential for cell growth, but its deletion resulted in abnormal spindle positioning, aberrant nuclear migration and defective mating capability. Precisely, deletion of SPC72 resulted in a decreased number of astral microtubules: early in the cell cycle only few were detectable, and these were unattached to the spindle pole body in small-budded cells. Later in the cell cycle few, if any, remained, and they were unable to align the spindle properly. We conclude that Spc72p is not absolutely required for nucleation per se, but is needed for normal abundance and stability of astral microtubules.

Genetic interactions between CDC31 and KAR1, two genes required for duplication of the microtubule organizing center in Saccharomyces cerevisiae.

Genetics ◽  
1994 ◽  
Vol 137 (2) ◽  
pp. 407-422 ◽  
Author(s):  
E A Vallen ◽  
W Ho ◽  
M Winey ◽  
M D Rose
Keyword(s):  
Copy Number ◽  
Gene Dosage ◽  
Spindle Pole Body ◽  
Direct Interaction ◽  
Spindle Pole ◽  
High Copy Number ◽  
Temperature Sensitive ◽  
Microtubule Organizing Center ◽  
Recessive Mutations ◽  
Organizing Center

Abstract KAR1 encodes an essential component of the yeast spindle pole body (SPB) that is required for karyogamy and SPB duplication. A temperature-sensitive mutation, kar1-delta 17, mapped to a region required for SPB duplication and for localization to the SPB. To identify interacting SPB proteins, we isolated 13 dominant mutations and 3 high copy number plasmids that suppressed the temperature sensitivity of kar1-delta 17. Eleven extragenic suppressor mutations mapped to two linkage groups, DSK1 and DSK2. The extragenic suppressors were specific for SPB duplication and did not suppress karyogamy-defective alleles. The major class, DSK1, consisted of mutations in CDC31. CDC31 is required for SPB duplication and encodes a calmodulin-like protein that is most closely related to caltractin/centrin, a protein associated with the Chlamydomonas basal body. The high copy number suppressor plasmids contained the wild-type CDC31 gene. One CDC31 suppressor allele conferred a temperature-sensitive defect in SPB duplication, which was counter-suppressed by recessive mutations in KAR1. In spite of the evidence for a direct interaction, the strongest CDC31 alleles, as well as both DSK2 alleles, suppressed a complete deletion of KAR1. However, the CDC31 alleles also made the cell supersensitive to KAR1 gene dosage, arguing against a simple bypass mechanism of suppression. We propose a model in which Kar1p helps localize Cdc31p to the SPB and that Cdc31p then initiates SPB duplication via interaction with a downstream effector.

scholarly journals Sfi1p has conserved centrin-binding sites and an essential function in budding yeast spindle pole body duplication

2003 ◽  
Vol 162 (7) ◽  
pp. 1211-1221 ◽  
Author(s):  
John V. Kilmartin
Keyword(s):  
Single Molecule ◽  
Protein A ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Binding Motif ◽  
Temperature Sensitive ◽  
Pole Body ◽  
Human Proteins ◽  
Z Domain ◽  
Essential Function

Centrins are calmodulin-like proteins present in microtubule-organizing centers. The Saccharomyces cerevisiae centrin, Cdc31p, was functionally tagged with a single Z domain of protein A, and used in pull-down experiments to isolate Cdc31p-binding proteins. One of these, Sfi1p, localizes to the half-bridge of the spindle pole body (SPB), where Cdc31p is also localized. Temperature-sensitive mutants in SFI1 show a defect in SPB duplication and genetic interactions with cdc31-1. Sfi1p contains multiple internal repeats that are also present in a Schizosaccharomyces pombe protein, which also localizes to the SPB, and in several human proteins, one of which localizes close to the centriole region. Cdc31p binds directly to individual Sfi1 repeats in a 1:1 ratio, so a single molecule of Sfi1p binds multiple molecules of Cdc31p. The centrosomal human protein containing Sfi1 repeats also binds centrin in the repeat region, showing that this centrin-binding motif is conserved.

scholarly journals A microtubule polymerase cooperates with the kinesin-6 motor and a microtubule cross-linker to promote bipolar spindle assembly in the absence of kinesin-5 and kinesin-14 in fission yeast

2017 ◽  
Vol 28 (25) ◽  
pp. 3647-3659 ◽  
Author(s):  
Masashi Yukawa ◽  
Tomoki Kawakami ◽  
Masaki Okazaki ◽  
Kazunori Kume ◽  
Ngang Heok Tang ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Chromosome Segregation ◽  
Spindle Pole Body ◽  
Spindle Assembly ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Bipolar Spindle ◽  
Pole Body ◽  
Cross Linker ◽  
Spindle Elongation

Accurate chromosome segregation relies on the bipolar mitotic spindle. In many eukaryotes, spindle formation is driven by the plus-end–directed motor kinesin-5 that generates outward force to establish spindle bipolarity. Its inhibition leads to the emergence of monopolar spindles with mitotic arrest. Intriguingly, simultaneous inactivation of the minus-end–directed motor kinesin-14 restores spindle bipolarity in many systems. Here we show that in fission yeast, three independent pathways contribute to spindle bipolarity in the absence of kinesin-5/Cut7 and kinesin-14/Pkl1. One is kinesin-6/Klp9 that engages with spindle elongation once short bipolar spindles assemble. Klp9 also ensures the medial positioning of anaphase spindles to prevent unequal chromosome segregation. Another is the Alp7/TACC-Alp14/TOG microtubule polymerase complex. Temperature-sensitive alp7cut7pkl1 mutants are arrested with either monopolar or very short spindles. Forced targeting of Alp14 to the spindle pole body is sufficient to render alp7cut7pkl1 triply deleted cells viable and promote spindle assembly, indicating that Alp14-mediated microtubule polymerization from the nuclear face of the spindle pole body could generate outward force in place of Cut7 during early mitosis. The third pathway involves the Ase1/PRC1 microtubule cross-linker that stabilizes antiparallel microtubules. Our study, therefore, unveils multifaceted interplay among kinesin-dependent and -independent pathways leading to mitotic bipolar spindle assembly.

DIPLOID SPORE FORMATION AND OTHER MEIOTIC EFFECTS OF TWO CELL-DIVISION-CYCLE MUTATIONS OF SACCHAROMYCES CEREVISIAE

Genetics ◽  
1980 ◽  
Vol 96 (4) ◽  
pp. 859-876 ◽  
Author(s):  
David Schild ◽  
Breck Byers
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Division ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Cell Division Cycle ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
Single Spore ◽  
Diploid Cells ◽  
Meiosis I

ABSTRACT The meiotic effects of two cell-division-cycle mutations of Saccharomyces cerevisiae (cdc5 and cdc14) have been examined. These mutations were isolated by L. H. Hartwell and his colleagues and characterized as defective in mitosis, causing a temperature-sensitive arrest in late nuclear division. When subjected to the restrictive temperature in meiosis, diploid cells homozygous for either of these mutations generally proceeded through premeiotic DNA synthesis and commitment to meiotic levels of recombination, but then arrested at a stage following spindle pole body (SPB) duplication and separation. The two SPBs lacked the interconnection by spindle microtubules typical of the complete meiosis I spindle. Challenge of these homozygotes by a semi-restrictive temperature often caused the production of asci containing two diploid spores. Genetic analysis of the viable pairs of spores revealed that each spore had become homozygous for centromere-linked markers significantly more frequently than for distal markers, indicating that the two spores each contained pairs of sister centromeres that had co-segregated in the reductional division of meiosis I. Ultrastructural analysis of the cdc5 homozygote demonstrated that these cells had completed meiosis I and formed two meiosis II spindles, but that the latter remained unusually short. This resulted in the encapsulation of both poles of each spindle within a single spore wall. These mutations therefore are defective in both meiotic divisions, as well as in the mitotic division described originally.

scholarly journals Interdependency of Fission Yeast Alp14/TOG and Coiled Coil Protein Alp7 in Microtubule Localization and Bipolar Spindle Formation

2004 ◽  
Vol 15 (4) ◽  
pp. 1609-1622 ◽  
Author(s):  
Masamitsu Sato ◽  
Leah Vardy ◽  
Miguel Angel Garcia ◽  
Nirada Koonrugsa ◽  
Takashi Toda
Keyword(s):  
Fission Yeast ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Spindle Pole ◽  
Mitotic Spindles ◽  
Microtubule Organization ◽  
Spindle Formation ◽  
Bipolar Spindle ◽  
C Terminus ◽  
Step Model

The Dis1/TOG family plays a pivotal role in microtubule organization. In fission yeast, Alp14 and Dis1 share an essential function in bipolar spindle formation. Here, we characterize Alp7, a novel coiled-coil protein that is required for organization of bipolar spindles. Both Alp7 and Alp14 colocalize to the spindle pole body (SPB) and mitotic spindles. Alp14 localization to these sites is fully dependent upon Alp7. Conversely, in the absence of Alp14, Alp7 localizes to the SPBs, but not mitotic spindles. Alp7 forms a complex with Alp14, where the C-terminal region of Alp14 interacts with the coiled-coil domain of Alp7. Intriguingly, this Alp14 C terminus is necessary and sufficient for mitotic spindle localization. Overproduction of either full-length or coiled-coil region of Alp7 results in abnormal V-shaped spindles and stabilization of interphase microtubules, which is induced independent of Alp14. Alp7 may be a functional homologue of animal TACC. Our results shed light on an interdependent relationship between Alp14/TOG and Alp7. We propose a two-step model that accounts for the recruitment of Alp7 and Alp14 to the SPB and microtubules.

Sign in / Sign up

Export Citation Format

Share Document