scholarly journals The CLIP-170 Homologue Bik1p Promotes the Phosphorylation and Asymmetric Localization of Kar9p

2006 ◽  
Vol 17 (1) ◽  
pp. 178-191 ◽  
Author(s):  
Jeffrey K. Moore ◽  
Sonia D'Silva ◽  
Rita K. Miller
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Binding Site ◽  
Mitotic Spindle ◽  
Phosphorylation Site ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Basic Domain ◽  
Pole Body ◽  
Two Hybrid ◽  
Insight Into

Accurate positioning of the mitotic spindle in Saccharomyces cerevisiae is coordinated with the asymmetry of the two poles and requires the microtubule-to-actin linker Kar9p. The asymmetric localization of Kar9p to one spindle pole body (SPB) and microtubule (MT) plus ends requires Cdc28p. Here, we show that the CLIP-170 homologue Bik1p binds directly to Kar9p. In the absence of Bik1p, Kar9p localization is not restricted to the daughter-bound SPB, but it is instead found on both SPBs. Kar9p is hypophosphorylated in bik1Δ mutants, and Bik1p binds to both phosphorylated and unphosphorylated isoforms of Kar9p. Furthermore, the two-hybrid interaction between full-length KAR9 and the cyclin CLB5 requires BIK1. The binding site of Clb5p on Kar9p maps to a short region within the basic domain of Kar9p that contains a conserved phosphorylation site, serine 496. Consistent with this, Kar9p is found on both SPBs in clb5Δ mutants at a frequency comparable with that seen in kar9-S496A strains. Together, these data suggest that Bik1p promotes the phosphorylation of Kar9p on serine 496, which affects its asymmetric localization to one SPB and associated cytoplasmic MTs. These findings provide further insight into a mechanism for directing centrosomal inheritance.

The essential mitotic target of calmodulin is the 110-kilodalton component of the spindle pole body in Saccharomyces cerevisiae

1993 ◽  
Vol 13 (12) ◽  
pp. 7913-7924
Author(s):  
J R Geiser ◽  
H A Sundberg ◽  
B H Chang ◽  
E G Muller ◽  
T N Davis
Keyword(s):  
Amino Acid ◽  
Sequence Analysis ◽  
Binding Site ◽  
Hybrid System ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Amino Acid Residues ◽  
Calmodulin Binding ◽  
Pole Body ◽  
Two Hybrid

Two independent methods identified the spindle pole body component Nuf1p/Spc110p as the essential mitotic target of calmodulin. Extragenic suppressors of cmd1-1 were isolated and found to define three loci, XCM1, XCM2, and XCM3 (extragenic suppressor of cmd1-1). The gene encoding a dominant suppressor allele of XCM1 was cloned. On the basis of DNA sequence analysis, genetic cosegregation, and mutational analysis, XCM1 was identified as NUF1/SPC110. Independently, a C-terminal portion of Nuf1p/Spc110p, amino acid residues 828 to 944, was isolated as a calmodulin-binding protein by the two-hybrid system. As assayed by the two-hybrid system, Nuf1p/Spc110p interacts with wild-type calmodulin and triple-mutant calmodulins defective in binding Ca2+ but not with two mutant calmodulins that confer a temperature-sensitive phenotype. Deletion analysis by the two-hybrid system mapped the calmodulin-binding site of Nuf1p/Spc110p to amino acid residues 900 to 927. Direct binding between calmodulin and Nuf1p/Spc110p was demonstrated by a modified gel overlay assay. Furthermore, indirect immunofluorescence with fixation procedures known to aid visualization of spindle pole body components localized calmodulin to the spindle pole body. Sequence analysis of five suppressor alleles of NUF1/SPC110 indicated that suppression of cmd1-1 occurs by C-terminal truncation of Nuf1p/Spc110p at amino acid residues 856, 863, or 881, thereby removing the calmodulin-binding site.

scholarly journals The essential mitotic target of calmodulin is the 110-kilodalton component of the spindle pole body in Saccharomyces cerevisiae.

1993 ◽  
Vol 13 (12) ◽  
pp. 7913-7924 ◽  
Author(s):  
J R Geiser ◽  
H A Sundberg ◽  
B H Chang ◽  
E G Muller ◽  
T N Davis
Keyword(s):  
Amino Acid ◽  
Sequence Analysis ◽  
Binding Site ◽  
Hybrid System ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Amino Acid Residues ◽  
Calmodulin Binding ◽  
Pole Body ◽  
Two Hybrid

Two independent methods identified the spindle pole body component Nuf1p/Spc110p as the essential mitotic target of calmodulin. Extragenic suppressors of cmd1-1 were isolated and found to define three loci, XCM1, XCM2, and XCM3 (extragenic suppressor of cmd1-1). The gene encoding a dominant suppressor allele of XCM1 was cloned. On the basis of DNA sequence analysis, genetic cosegregation, and mutational analysis, XCM1 was identified as NUF1/SPC110. Independently, a C-terminal portion of Nuf1p/Spc110p, amino acid residues 828 to 944, was isolated as a calmodulin-binding protein by the two-hybrid system. As assayed by the two-hybrid system, Nuf1p/Spc110p interacts with wild-type calmodulin and triple-mutant calmodulins defective in binding Ca2+ but not with two mutant calmodulins that confer a temperature-sensitive phenotype. Deletion analysis by the two-hybrid system mapped the calmodulin-binding site of Nuf1p/Spc110p to amino acid residues 900 to 927. Direct binding between calmodulin and Nuf1p/Spc110p was demonstrated by a modified gel overlay assay. Furthermore, indirect immunofluorescence with fixation procedures known to aid visualization of spindle pole body components localized calmodulin to the spindle pole body. Sequence analysis of five suppressor alleles of NUF1/SPC110 indicated that suppression of cmd1-1 occurs by C-terminal truncation of Nuf1p/Spc110p at amino acid residues 856, 863, or 881, thereby removing the calmodulin-binding site.

Ady3p Links Spindle Pole Body Function to Spore Wall Synthesis in Saccharomyces cerevisiae

Genetics ◽  
2002 ◽  
Vol 160 (4) ◽  
pp. 1439-1450
Author(s):  
Mark E Nickas ◽  
Aaron M Neiman
Keyword(s):  
Saccharomyces Cerevisiae ◽  
De Novo ◽  
Spindle Pole Body ◽  
Leading Edge ◽  
Spindle Pole ◽  
Spore Wall ◽  
Pole Body ◽  
Prospore Membrane ◽  
Sporulation Efficiency ◽  
Spore Walls

Abstract Spore formation in Saccharomyces cerevisiae requires the de novo synthesis of prospore membranes and spore walls. Ady3p has been identified as an interaction partner for Mpc70p/Spo21p, a meiosis-specific component of the outer plaque of the spindle pole body (SPB) that is required for prospore membrane formation, and for Don1p, which forms a ring-like structure at the leading edge of the prospore membrane during meiosis II. ADY3 expression has been shown to be induced in midsporulation. We report here that Ady3p interacts with additional components of the outer and central plaques of the SPB in the two-hybrid assay. Cells that lack ADY3 display a decrease in sporulation efficiency, and most ady3Δ/ady3Δ asci that do form contain fewer than four spores. The sporulation defect in ady3Δ/ady3Δ cells is due to a failure to synthesize spore wall polymers. Ady3p forms ring-like structures around meiosis II spindles that colocalize with those formed by Don1p, and Don1p rings are absent during meiosis II in ady3Δ/ady3Δ cells. In mpc70Δ/mpc70Δ cells, Ady3p remains associated with SPBs during meiosis II. Our results suggest that Ady3p mediates assembly of the Don1p-containing structure at the leading edge of the prospore membrane via interaction with components of the SPB and that this structure is involved in spore wall formation.

scholarly journals Mutant Membrane Protein of the Budding Yeast Spindle Pole Body Is Targeted to the Endoplasmic Reticulum Degradation Pathway

Genetics ◽  
2002 ◽  
Vol 162 (2) ◽  
pp. 567-578 ◽  
Author(s):  
Susan McBratney ◽  
Mark Winey
Keyword(s):  
Mitotic Spindle ◽  
Spindle Pole Body ◽  
Degradation Pathway ◽  
Spindle Pole ◽  
Wild Type ◽  
Er Quality Control ◽  
Pole Body ◽  
Cytoplasmic Face ◽  
Ubiquitin Conjugating Enzyme ◽  
Ubiquitin Conjugation

Abstract Mutation of either the yeast MPS2 or the NDC1 gene leads to identical spindle pole body (SPB) duplication defects: The newly formed SPB is improperly inserted into the nuclear envelope (NE), preventing the cell from forming a bipolar mitotic spindle. We have previously shown that both MPS2 and NDC1 encode integral membrane proteins localized at the SPB. Here we show that CUE1, previously known to have a role in coupling ubiquitin conjugation to ER degradation, is an unusual dosage suppressor of mutations in MPS2 and NDC1. Cue1p has been shown to recruit the soluble ubiquitin-conjugating enzyme, Ubc7p, to the cytoplasmic face of the ER membrane where it can ubiquitinate its substrates and target them for degradation by the proteasome. Both mps2-1 and ndc1-1 are also suppressed by disruption of UBC7 or its partner, UBC6. The Mps2-1p mutant protein level is markedly reduced compared to wild-type Mps2p, and deletion of CUE1 restores the level of Mps2-1p to nearly wild-type levels. Our data indicate that Mps2p may be targeted for degradation by the ER quality control pathway.

The influence of the microtubule inhibitor, methyl benzimidazol-2-yl-carbamate (MBC) on nuclear division and the cell cycle in Saccharomyces cerevisiae

1980 ◽  
Vol 46 (1) ◽  
pp. 341-352
Author(s):  
R.A. Quinlan ◽  
C.I. Pogson ◽  
K. Gull
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Ultrastructural Examination ◽  
Microtubule Inhibitor ◽  
Microtubule Polymerization ◽  
Pole Body ◽  
Outer Component ◽  
Spindle Microtubules

Methyl benzimidazol-2-yl-carbamate (MBC), at a concentration of 100 microM, has a pronounced effect on the growth of Saccharomyces cerevisiae, resulting in the accumulation of cells as large doublets. We have determined a specific execution point for the effect of MBC on the yeast cell cycle, and have shown that this execution point is between the cycle events of spindle pole body duplication and spindle pole body separation. An ultrastructural examination of the MBC-treated cells revealed the absence of cytoplasmic and spindle microtubules. MBC treatment also produced an altered spindle pole body morphology, causing the disappearance of the outer component. Nuclear size was also markedly increased in the MBC-induced doublet cells, although the septa were completely absent from these doublet cells. It is proposed that MBC inhibits microtubule polymerization, rather than causing the depolymerization of stable microtubules.

Two-hybrid search for proteins that interact with Sad1 and Kms1, two membrane-bound components of the spindle pole body in fission yeast

2003 ◽  
Vol 270 (6) ◽  
pp. 449-461 ◽  
Author(s):  
F. Miki ◽  
A. Kurabayashi ◽  
Y. Tange ◽  
K. Okazaki ◽  
M. Shimanuki ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Hybrid Search ◽  
Pole Body ◽  
Membrane Bound ◽  
Two Hybrid

scholarly journals Toxic effects of excess cloned centromeres.

1986 ◽  
Vol 6 (6) ◽  
pp. 2213-2222 ◽  
Author(s):  
B Futcher ◽  
J Carbon
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Copy Number ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Host Cells ◽  
Selectable Markers ◽  
Pole Body ◽  
Copy Numbers ◽  
Yeast Plasmids

Plasmids carrying a Saccharomyces cerevisiae centromere have a copy number of one or two, whereas other yeast plasmids have high copy numbers. The number of CEN plasmids per yeast cell was made artificially high by transforming cells simultaneously with several different CEN plasmids carrying different, independently selectable markers. Some host cells carried five different CEN plasmids and an average total of 13 extra copies of CEN3. Several effects were noted. The copy number of each plasmid was unexpectedly high. The plasmids were mutually unstable. Cultures contained many dead cells. The viable host cells grew more slowly than control cells, even in nonselective medium. There was a pause in the cell cycle at or just before mitosis. We conclude that an excess of centromeres is toxic and that the copy number of centromere plasmids is low partly because of selection against cells carrying multiple centromere plasmids. The toxicity may be caused by competition between the centromeres for some factor present in limiting quantities, e.g., centromere-binding proteins, microtubules, or space on the spindle pole body.

scholarly journals Bim1p/Yeb1p Mediates the Kar9p-dependent Cortical Attachment of Cytoplasmic Microtubules

2000 ◽  
Vol 11 (9) ◽  
pp. 2949-2959 ◽  
Author(s):  
Rita K. Miller ◽  
Soo-Chen Cheng ◽  
Mark D. Rose
Keyword(s):  
Fluorescent Protein ◽  
Binding Protein ◽  
Spindle Pole Body ◽  
Attachment Site ◽  
Spindle Pole ◽  
Cell Cortex ◽  
Microtubule Binding ◽  
Pole Body ◽  
Cytoplasmic Microtubules ◽  
Two Hybrid

In Saccharomyces cerevisiae, positioning of the mitotic spindle depends on the interaction of cytoplasmic microtubules with the cell cortex. In this process, cortical Kar9p in the bud acts as a link between the actin and microtubule cytoskeletons. To identify Kar9p-interacting proteins, a two-hybrid screen was conducted with the use of full-length Kar9p as bait, and three genes were identified: BIM1, STU2, andKAR9 itself. STU2 encodes a component of the spindle pole body. Bim1p is the yeast homologue of the human microtubule-binding protein EB1, which is a binding partner to the adenomatous polyposis coli protein involved in colon cancer. Eighty-nine amino acids within the third quarter of Bim1p was sufficient to confer interaction with Kar9p. The two-hybrid interactions were confirmed with the use of coimmunoprecipitation experiments. Genetic analysis placed Bim1p in the Kar9p pathway for nuclear migration. Bim1p was not required for Kar9p's cortical or spindle pole body localization. However, deletion ofBIM1 eliminated Kar9p localization along cytoplasmic microtubules. Furthermore, in the bim1 mutants, the cytoplasmic microtubules no longer intersected the cortical dot of Green Fluorescent Protein–Kar9p. These experiments demonstrate that the interaction of cytoplasmic microtubules with the Kar9p cortical attachment site requires the microtubule-binding protein Bim1p.

Sign in / Sign up

Export Citation Format

Share Document