scholarly journals Actin-depolymerizing Protein Adf1 Is Required for Formation and Maintenance of the Contractile Ring during Cytokinesis in Fission Yeast

2006 ◽  
Vol 17 (4) ◽  
pp. 1933-1945 ◽  
Author(s):  
Kentaro Nakano ◽  
Issei Mabuchi
Keyword(s):  
Actin Cytoskeleton ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Myosin Ii ◽  
Yeast Cells ◽  
Contractile Ring ◽  
Capping Protein ◽  
Division Site ◽  
Family Protein

The role of the actin-depolymerizing factor (ADF)/cofilin-family protein Adf1 in cytokinesis of fission yeast cells was studied. Adf1 was required for accumulation of actin at the division site by depolymerizing actin at the cell ends, assembly of the contractile ring through severing actin filaments, and maintenance of the contractile ring once formed. Genetic and cytological analyses suggested that it collaborates with profilin and capping protein in the mitotic reorganization of the actin cytoskeleton. Furthermore, it was unexpectedly found that Adf1 and myosin-II also collaborate in assembling the contractile ring. Tropomyosin was shown to antagonize the function of Adf1 in the contractile ring. We propose that formation and maintenance of the contractile ring are achieved by a balanced collaboration of these proteins.

scholarly journals Profilin-mediated Competition between Capping Protein and Formin Cdc12p during Cytokinesis in Fission Yeast

2005 ◽  
Vol 16 (5) ◽  
pp. 2313-2324 ◽  
Author(s):  
David R. Kovar ◽  
Jian-Qiu Wu ◽  
Thomas D. Pollard
Keyword(s):  
Fission Yeast ◽  
Actin Filament ◽  
Actin Filaments ◽  
Cell Separation ◽  
The Other ◽  
Temperature Sensitive ◽  
Contractile Ring ◽  
Capping Protein ◽  
Division Site ◽  
Ring Constriction

Fission yeast capping protein SpCP is a heterodimer of two subunits (Acp1p and Acp2p) that binds actin filament barbed ends. Neither acp1 nor acp2 is required for viability, but cells lacking either or both subunits have cytokinesis defects under stressful conditions, including elevated temperature, osmotic stress, or in combination with numerous mild mutations in genes important for cytokinesis. Defects arise as the contractile ring constricts and disassembles, resulting in delays in cell separation. Genetic and biochemical interactions show that the cytokinesis formin Cdc12p competes with capping protein for actin filament barbed ends in cells. Deletion of acp2 partly suppresses cytokinesis defects in temperature-sensitive cdc12-112 cells and mild overexpression of capping protein kills cdc12-112 cells. Biochemically, profilin has opposite effects on filaments capped with Cdc12p and capping protein. Profilin depolymerizes actin filaments capped by capping protein but allows filaments capped by Cdc12p to grow at their barbed ends. Once associated with a barbed end, either Cdc12p or capping protein prevents the other from influencing polymerization at that end. Given that capping protein arrives at the division site 20 min later than Cdc12p, capping protein may slowly replace Cdc12p on filament barbed ends in preparation for filament disassembly during ring constriction.

scholarly journals Anchoring of actin to the plasma membrane enables tension production in the fission yeast cytokinetic ring

2019 ◽  
Vol 30 (16) ◽  
pp. 2053-2064 ◽  
Author(s):  
Shuyuan Wang ◽  
Ben O’Shaughnessy
Keyword(s):  
Plasma Membrane ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Tensile Force ◽  
Myosin Ii ◽  
Quantitative Evidence ◽  
Explicit Simulation ◽  
Adjacent Segments ◽  
Develop Tension

The cytokinetic ring generates tensile force that drives cell division, but how tension emerges from the relatively disordered ring organization remains unclear. Long ago, a musclelike sliding filament mechanism was proposed, but evidence for sarcomeric order is lacking. Here we present quantitative evidence that in fission yeast, ring tension originates from barbed-end anchoring of actin filaments to the plasma membrane, providing resistance to myosin forces that enables filaments to develop tension. The role of anchoring was highlighted by experiments on isolated fission yeast rings, where sections of ring became unanchored from the membrane and shortened ∼30-fold faster than normal. The dramatically elevated constriction rates are unexplained. Here we present a molecularly explicit simulation of constricting partially anchored rings as studied in these experiments. Simulations accurately reproduced the experimental constriction rates and showed that following anchor release, a segment becomes tensionless and shortens via a novel noncontractile reeling-in mechanism at about the velocity of load-free myosin II. The ends are reeled in by barbed end–anchored actin filaments in adjacent segments. Other actin anchoring schemes failed to constrict rings. Our results quantitatively support a specific organization and anchoring scheme that generate tension in the cytokinetic ring.

scholarly journals Tropomyosin and Myosin-II Cellular Levels Promote Actomyosin Ring Assembly in Fission Yeast

2010 ◽  
Vol 21 (6) ◽  
pp. 989-1000 ◽  
Author(s):  
Benjamin C. Stark ◽  
Thomas E. Sladewski ◽  
Luther W. Pollard ◽  
Matthew Lord
Keyword(s):  
Motor Activity ◽  
Atpase Activity ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Myosin Ii ◽  
Bound State ◽  
Contractile Ring ◽  
Ring Assembly

Myosin-II (Myo2p) and tropomyosin are essential for contractile ring formation and cytokinesis in fission yeast. Here we used a combination of in vivo and in vitro approaches to understand how these proteins function at contractile rings. We find that ring assembly is delayed in Myo2p motor and tropomyosin mutants, but occurs prematurely in cells engineered to express two copies of myo2. Thus, the timing of ring assembly responds to changes in Myo2p cellular levels and motor activity, and the emergence of tropomyosin-bound actin filaments. Doubling Myo2p levels suppresses defects in ring assembly associated with a tropomyosin mutant, suggesting a role for tropomyosin in maximizing Myo2p function. Correspondingly, tropomyosin increases Myo2p actin affinity and ATPase activity and promotes Myo2p-driven actin filament gliding in motility assays. Tropomyosin achieves this by favoring the strong actin-bound state of Myo2p. This mode of regulation reflects a role for tropomyosin in specifying and stabilizing actomyosin interactions, which facilitates contractile ring assembly in the fission yeast system.

scholarly journals Anchoring of actin to the plasma membrane enables tension production in the fission yeast cytokinetic ring

2019 ◽  
Author(s):  
Shuyuan Wang ◽  
Ben O’Shaughnessy
Keyword(s):  
Plasma Membrane ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Tensile Force ◽  
Myosin Ii ◽  
Quantitative Evidence ◽  
Explicit Simulation ◽  
Adjacent Segments ◽  
Develop Tension

AbstractThe cytokinetic ring generates tensile force that drives cell division, but how tension emerges from the relatively disordered ring organization remains unclear. Long ago a muscle-like sliding filament mechanism was proposed, but evidence for sarcomeric order is lacking. Here we present quantitative evidence that in fission yeast ring tension originates from barbed-end anchoring of actin filaments to the plasma membrane, providing resistance to myosin forces which enables filaments to develop tension. The role of anchoring was highlighted by experiments on isolated fission yeast rings, where sections of ring unanchored from the membrane and shortened ~30-fold faster than normal [Mishra M., et al. (2013) Nat Cell Biol 15(7):853-859]. The dramatically elevated constriction rates are unexplained. Here we present a molecularly explicit simulation of constricting partially anchored rings as studied in these experiments. Simulations accurately reproduced the experimental constriction rates, and showed that following anchor release a segment becomes tensionless and shortens via a novel non-contractile reeling-in mechanism at about the load-free myosin-II velocity. The ends are reeled in by barbed-end-anchored actin filaments in adjacent segments. Other actin anchoring schemes failed to constrict rings. Our results quantitatively support a specific organization and anchoring scheme that generates tension in the cytokinetic ring.

scholarly journals Role of Tropomyosin in Formin-mediated Contractile Ring Assembly in Fission Yeast

2009 ◽  
Vol 20 (8) ◽  
pp. 2160-2173 ◽  
Author(s):  
Colleen T. Skau ◽  
Erin M. Neidt ◽  
David R. Kovar
Keyword(s):  
Fission Yeast ◽  
Actin Filament ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Actin Assembly ◽  
Animal Cells ◽  
Contractile Ring ◽  
Direct Role ◽  
Ring Assembly

Like animal cells, fission yeast divides by assembling actin filaments into a contractile ring. In addition to formin Cdc12p and profilin, the single tropomyosin isoform SpTm is required for contractile ring assembly. Cdc12p nucleates actin filaments and remains processively associated with the elongating barbed end while driving the addition of profilin-actin. SpTm is thought to stabilize mature filaments, but it is not known how SpTm localizes to the contractile ring and whether SpTm plays a direct role in Cdc12p-mediated actin polymerization. Using “bulk” and single actin filament assays, we discovered that Cdc12p can recruit SpTm to actin filaments and that SpTm has diverse effects on Cdc12p-mediated actin assembly. On its own, SpTm inhibits actin filament elongation and depolymerization. However, Cdc12p completely overcomes the combined inhibition of actin nucleation and barbed end elongation by profilin and SpTm. Furthermore, SpTm increases the length of Cdc12p-nucleated actin filaments by enhancing the elongation rate twofold and by allowing them to anneal end to end. In contrast, SpTm ultimately turns off Cdc12p-mediated elongation by “trapping” Cdc12p within annealed filaments or by dissociating Cdc12p from the barbed end. Therefore, SpTm makes multiple contributions to contractile ring assembly during and after actin polymerization.

scholarly journals Progress towards understanding the mechanism of cytokinesis in fission yeast

2008 ◽  
Vol 36 (3) ◽  
pp. 425-430 ◽  
Author(s):  
Thomas D. Pollard
Keyword(s):  
Fission Yeast ◽  
Actin Filaments ◽  
Biochemical Analysis ◽  
Fluorescent Proteins ◽  
Myosin Ii ◽  
Live Cells ◽  
Contractile Ring ◽  
Simple Hypothesis ◽  
A Cell ◽  
Temporal And Spatial

We use fission yeast to study the molecular mechanism of cytokinesis. We benefit from a long history in genetic analysis of the cell cycle in fission yeast, which provided the most complete inventory of cytokinesis proteins. We used fluorescence microscopy of proteins tagged with fluorescent proteins to establish the temporal and spatial pathway for the assembly and constriction of the contractile ring. We combined biochemical analysis of purified proteins (myosin-II, profilin, formin Cdc12p and cofilin), observations of fluorescent fusion proteins in live cells and mathematical modelling to formulate and test a simple hypothesis for the assembly of the contractile ring. This model involves the formation of 65 nodes containing myosin-II and formin Cdc12p around the equator of the cell. As a cell enters anaphase, actin filaments grow from formin Cdc12p in these nodes. Myosin captures actin filaments from adjacent nodes and pulls intermittently to condense the nodes into a contractile ring.

scholarly journals Actin turnover maintains actin filament homeostasis during cytokinetic ring contraction

2017 ◽  
Vol 216 (9) ◽  
pp. 2657-2667 ◽  
Author(s):  
Ting Gang Chew ◽  
Junqi Huang ◽  
Saravanan Palani ◽  
Ruth Sommese ◽  
Anton Kamnev ◽  
...  
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Myosin Ii ◽  
Contractile Ring ◽  
Ring Contraction ◽  
Actin Turnover ◽  
Exogenous Addition ◽  
Turn Over

Cytokinesis in many eukaryotes involves a tension-generating actomyosin-based contractile ring. Many components of actomyosin rings turn over during contraction, although the significance of this turnover has remained enigmatic. Here, using Schizosaccharomyces japonicus, we investigate the role of turnover of actin and myosin II in its contraction. Actomyosin ring components self-organize into ∼1-µm-spaced clusters instead of undergoing full-ring contraction in the absence of continuous actin polymerization. This effect is reversed when actin filaments are stabilized. We tested the idea that the function of turnover is to ensure actin filament homeostasis in a synthetic system, in which we abolished turnover by fixing rings in cell ghosts with formaldehyde. We found that these rings contracted fully upon exogenous addition of a vertebrate myosin. We conclude that actin turnover is required to maintain actin filament homeostasis during ring contraction and that the requirement for turnover can be bypassed if homeostasis is achieved artificially.

scholarly journals The fission yeast cytokinesis formin Cdc12p is a barbed end actin filament capping protein gated by profilin

2003 ◽  
Vol 161 (5) ◽  
pp. 875-887 ◽  
Author(s):  
David R. Kovar ◽  
Jeffrey R. Kuhn ◽  
Andrea L. Tichy ◽  
Thomas D. Pollard
Keyword(s):  
Fission Yeast ◽  
Actin Filaments ◽  
Maximum Yield ◽  
Restrictive Temperature ◽  
Permissive Temperature ◽  
Contractile Ring ◽  
Capping Protein ◽  
Ring Assembly ◽  
End Capping ◽  
Actin Cables

Cytokinesis in most eukaryotes requires the assembly and contraction of a ring of actin filaments and myosin II. The fission yeast Schizosaccharomyces pombe requires the formin Cdc12p and profilin (Cdc3p) early in the assembly of the contractile ring. The proline-rich formin homology (FH) 1 domain binds profilin, and the FH2 domain binds actin. Expression of a construct consisting of the Cdc12 FH1 and FH2 domains complements a conditional mutant of Cdc12 at the restrictive temperature, but arrests cells at the permissive temperature. Cells overexpressing Cdc12(FH1FH2)p stop growing with excessive actin cables but no contractile rings. Like capping protein, purified Cdc12(FH1FH2)p caps the barbed end of actin filaments, preventing subunit addition and dissociation, inhibits end to end annealing of filaments, and nucleates filaments that grow exclusively from their pointed ends. The maximum yield is one filament pointed end per six formin polypeptides. Profilins that bind both actin and poly-l-proline inhibit nucleation by Cdc12(FH1FH2)p, but polymerization of monomeric actin is faster, because the filaments grow from their barbed ends at the same rate as uncapped filaments. On the other hand, Cdc12(FH1FH2)p blocks annealing even in the presence of profilin. Thus, formins are profilin-gated barbed end capping proteins with the ability to initiate actin filaments from actin monomers bound to profilin. These properties explain why contractile ring assembly requires both formin and profilin and why viability depends on the ability of profilin to bind both actin and poly-l-proline.

scholarly journals Three-dimensional arrangement of F-actin in the contractile ring of fission yeast

2007 ◽  
Vol 178 (5) ◽  
pp. 765-771 ◽  
Author(s):  
Tomoko Kamasaki ◽  
Masako Osumi ◽  
Issei Mabuchi
Keyword(s):  
Electron Microscopy ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Three Dimensional ◽  
Single Site ◽  
Yeast Cells ◽  
Contractile Ring ◽  
Division Plane ◽  
Early Stages ◽  
Myosin S1

The contractile ring, which is required for cytokinesis in animal and yeast cells, consists mainly of actin filaments. Here, we investigate the directionality of the filaments in fission yeast using myosin S1 decoration and electron microscopy. The contractile ring is composed of around 1,000 to 2,000 filaments each around 0.6 μm in length. During the early stages of cytokinesis, the ring consists of two semicircular populations of parallel filaments of opposite directionality. At later stages, before contraction, the ring filaments show mixed directionality. We consider that the ring is initially assembled from a single site in the division plane and that filaments subsequently rearrange before contraction initiates.

scholarly journals Characterization of structural and functional domains of the anillin-related protein Mid1p that contribute to cytokinesis in fission yeast

2012 ◽  
Vol 23 (20) ◽  
pp. 3993-4007 ◽  
Author(s):  
Shambaditya Saha ◽  
Thomas D. Pollard
Keyword(s):  
Fission Yeast ◽  
Myosin Ii ◽  
Full Length ◽  
Yeast Cells ◽  
Related Protein ◽  
Contractile Ring ◽  
Structural Domains ◽  
Biophysical Analysis ◽  
Direct Condensation

Fission yeast cells depend on the anillin-related protein Mid1p for reliable cytokinesis. Insolubility limits the purification of full-length Mid1p for biophysical analysis, and lack of knowledge about the structural domains of Mid1p limits functional analysis. We addressed these limitations by identifying in a bacterial expression screen of random Mid1p fragments five soluble segments that can be purified and one insoluble segment. Using complementation experiments in Δmid1 cells, we tested the biological functions of these six putative domains that account for full-length Mid1p. The N-terminal domain (residues 1–149) is essential for correct positioning and orientation of septa. The third domain (residues 309–452) allows the construct composed of the first three domains (residues 1-452) to form hydrodynamically well-behaved octamers. Constructs consisting of residues 1–452 or 1–578 carry out most functions of full-length Mid1p, including concentration at the equatorial cortex in nodes that accumulate myosin-II and other contractile ring proteins during mitosis. However, cells depending on these constructs without the insoluble domain (residues 579–797) form equatorially located rings slowly from strands rather than by direct condensation of nodes. We conclude that residues 1–578 assemble node components myosin-II, Rng2p, and Cdc15p, and the insoluble domain facilitates the normal, efficient condensation of nodes into rings.

Sign in / Sign up

Export Citation Format

Share Document