scholarly journals Impact of Cover Crop and At-Planting Insecticide on Thrips Populations, 1996

1997 ◽  
Vol 22 (1) ◽  
pp. 247-248
Author(s):  
D. R. Cook ◽  
E. Burris ◽  
B. R. Leonard ◽  
J. B. Graves
Keyword(s):  
Cover Crop ◽  
Cotton Seed ◽  
Seeding Rate ◽  
Vegetation Control ◽  
Spray System ◽  
No Till ◽  
Whole Plant ◽  
The Press ◽  
Major Pest ◽  
Plot Design

Abstract Plots were replicated four times in a split plot design and were four rows (40 inch spacing) X45 ft. Stoneville 474 cotton seed of the same seed lot was planted on 7 May on a Sharkey clay soil which was fertilized with 90 lb N/acre. Cotton seed was planted no-till with a John Deere 7100 series planter which was equipped with 10 inch-seed cones mounted to replace the seed hoppers. The seeding rate was 4 seed/row ft. Granular in-furrow treatments were applied with 8-inch belt cone applicators mounted to replace the standard granular applicators. In-furrow spray treatments were applied with a CO2 charged spray system through 25015 nozzles (1/row) mounted in front of the press wheels. The spray tips were turned to spray across the furrow and calibrated to deliver 5 gpa finished spray. Cover crop treatments consisted of winter wheat and native winter vegetation. Control of thrips was assessed by randomly selecting 5 plants per plot on 21 and 28 May and 7 Jun. Plant samples were processed by using whole-plant washing procedures to remove insects. Major pest and/or secondary pest control was initiated in Jun and continued on an “as needed” basis through Aug

scholarly journals Impact of Soil Saturation on the Performance of At-Planting Insecticides, 1996

1997 ◽  
Vol 22 (1) ◽  
pp. 246-247
Author(s):  
D. R. Cook ◽  
E. Burris ◽  
B. R. Leonard ◽  
J. B. Graves
Keyword(s):  
Cotton Seed ◽  
Clay Soil ◽  
Soil Conditions ◽  
Seeding Rate ◽  
Spray System ◽  
Whole Plant ◽  
The Press ◽  
Spray Irrigation ◽  
Major Pest ◽  
Plot Design

Abstract Plots were replicated four times in a split plot design and were four rows (40 inch spacing) X45 ft. Stoneville LA 887 cotton seed of the same seed lot was planted on 6 May on a Sharkey clay soil which was fertilized with 90 lb N/acre. Cotton seed was planted with a John Deere 7100 series planter which was equipped with 10 inch seed cones mounted to replace the seed hoppers. The seeding rate was 4 seed/row ft. Granular in-furrow treatments were applied with 8 inch belt cone applicators mounted to replace the standard granular applicators. In-furrow spray treatments were applied with a CO2 charged spray system through 25015 nozzles (1/row) mounted in front of the press wheels. The spray tips were turned to spray across the furrow and calibrated to deliver 5 gpa finished spray. Irrigation treatments consisted of no irrigation and the equivalent of 4 inches of rainfall 4 days after emergence, simulating excess rainfall and saturated soil conditions. Control of thrips was assessed by randomly selecting 5 plants per plot on 20, 24, 28, and 31 May and 5 and 9 Jun. Plant samples were processed by using whole plant washing procedures to remove insects. Major pest and/or secondary pest control was initiated in Jun and continued on an “as needed” basis through Aug. Plots were harvested on 7 Oct. The two center rows were mechanically harvested using a John Deere spindle type picker. Yields were converted to lbs seed cotton/acre.

Evaluation of Thrips Densities in At-Planting Seed and Soil Treatments on Gigger Silt Loam, 1996

1997 ◽  
Vol 22 (1) ◽  
pp. 245-245
Author(s):  
D. R. Cook ◽  
E. Burris ◽  
B. R. Leonard ◽  
J. B. Graves
Keyword(s):  
Cotton Seed ◽  
Silt Loam ◽  
Seed Cotton ◽  
Seeding Rate ◽  
Spray System ◽  
Whole Plant ◽  
The Press ◽  
Major Pest ◽  
Loam Soil ◽  
Spray Control

Abstract Plots were replicated four times in a RCB design and were four rows wide (40 inch spacing) X45 ft. Stoneville 474 cotton seed of the same seed lot was planted on a Gigger silt loam soil on 7 May. The seeding rate was 4 seed/row ft. Cotton seed was planted with a John Deere 7300 series planter which was equipped with 10 inch seed cones mounted to replace the seed hoppers. Granular in-furrow treatments were applied with standard granular applicators. In-furrow spray treatments were applied with a CO2 charged spray system through 25015 nozzles (1/row) mounted in front of the press wheels. The spray tips were turned to spray across the furrow and calibrated to deliver 5 gpa finished spray. Control of thrips was assessed by randomly selecting 5 plants per plot on 20, 24, 28, and 31 May and 5 and 9 Jun. Plant samples were processed by using whole plant washing procedures to remove insects. Major pest and/or secondary pest control was initiated in Jun and continued on an “as needed” basis through Aug. Percentage of open bolls was determined by counting all open and unopened bolls within a 3.0 m section of a center row on 18 Sep. Plots were harvested on 26 Sep and 10 Oct. These data were subjected to appropriate calculations to determine percent first harvest. The center two rows were mechanically harvested using a John Deere spindle type picker. Yields were converted to lbs seed cotton/acre.

scholarly journals A Threshold Management Test with Nucotn 33B, 1996

1997 ◽  
Vol 22 (1) ◽  
pp. 242-242 ◽  
Author(s):  
E. Burris ◽  
D. R. Cook ◽  
B. R. Leonard ◽  
J. B. Graves
Keyword(s):  
Cotton Seed ◽  
Methyl Parathion ◽  
Boll Weevil ◽  
Control Measures ◽  
Silt Loam ◽  
Seeding Rate ◽  
Spray System ◽  
The Press ◽  
Loam Soil ◽  
Insecticide Control

Abstract Plots were replicated four times in a RCB design and were eight rows (40 in spacing) X 45 ft. Transgenic cotton seed expressing the Bt delta endotoxin and seed of the non-transgenic parent line (DP 5415) were planted on 15 May, on a Commerce silt loam soil which was fertilized with 90 lb N/acre. Cotton seed was planted with a John Deere 7100 series planter which was equipped with 10 inch seed cones mounted to replace the seed hoppers. The seeding rate was 4 seed/row ft. Granular in-furrow treatments were applied with 8 inch belt cone applicators. In-furrow spray treatments were applied with a CO2 charged spray system through 25015 flat fan nozzles positioned in front of the press wheels. The spray tips were turned to spray across the furrow and were calibrated to deliver 5 gpa finished spray. All plots received 0.5 lb (AI)/acre Temik 15G and 0.75 lb (AI)/acre Terraclor Super X 2E at planting. Insecticide control measures were applied to treatments when boll worms and tobacco budworms first deposited eggs in Jul, and at 2, 5, and 7 percent BW/TBW/BAW damaged squares. The test was conducted in the presence ol high boll weevil population densities. Beet army worms were present in late Jul, Aug and Sep. Control of boll weevils and tarnished plant bugs was maintained on an “as needed” basis using the following treatments: Methyl parathion 4E, (0.33 lb (AI)/acre) on 11 Jul; Vydate 3.77CLV, (0.25 lb (AI)/acre) on 30 Jul; Methyl parathion 4E, (0.33 lb (AI)/acre) + Orthene 90S, (0.33 lb (AI)/acre) on 6 Aug; Methyl parathion 4E, (0.33 lb (AI)/acre) + Dimethoate 4E. (0.25 lb (AI)/acre) on 13 Aug; Baythroid 2E, (0.045 lb (AI)/acre) on 11 Sep. In addition to the overspray treatments listed above, the DP 5415 and NuCOTN 33B spray strategies (treatments 2 and 4) received the following insecticide treatments: Karate IE, (0.03 lb (AI)/acre) on 22 Jul; Karate IE, (0.03 lb (AI)/acre) on 25 Jul; Karate IE, (0.03 lb (AI)/acre) on 30 Jul; Karate IE, (0.03 lb (AI)/acre) on 5 Aug; Karate IE, (0.03 lb (AI)/acre) on 8 Aug. Cu-racron 8E, (1.0 lb (AI)/acre) + Pirate 3E, (0.2 lb (AI)/acre) + Vydate 3.77CLV, (0.25 lb (AI)/acre) on 15 Aug and Curacron 8E, (1.0 lb (AI)/acre) + Pi-rate 3 SC, (0.2 lb (AI)/acre) + Methyl parathion 4E (0.33 lb (AI)/acre on 26 Aug. Bollgard® threshold treatments 2% and 5% were sprayed with Karate IE, (0.033 lb (AI)/acre) on 8 Aug and Curacron 8E (1.0 lb (AI)/acre) + Pirate 3 SC (0.2 lb (AI)/acre) + Vydate 3.77 CLV, (0.25 lb (AI)/acre) on 15 Aug. All NuCOTN 33B threshold treatments were sprayed with Baythroid 2E (0.045 lb (AI)/acre), on 11 Sep. Plant terminals and squares were examined for BW/TBW eggs, larvae, damage and boll weevil damaged squares on 11, 24, 30 Jul, and 2, 8, 13 and 19 Aug. Terminals were examined on all dates except 19 Aug. The center four rows of the plots were harvested on 14 Oct to determine seedcotton yield. Plots were harvested using a John Deere spindle type picker. Yields were converted to lb seedcotton/acre.

Conservation tillage issues: Cover crop-based organic rotational no-till grain production in the mid-Atlantic region, USA

2012 ◽  
Vol 27 (1) ◽  
pp. 31-40 ◽  
Author(s):  
Steven B. Mirsky ◽  
Matthew R. Ryan ◽  
William S. Curran ◽  
John R. Teasdale ◽  
Jude Maul ◽  
...  
Keyword(s):  
Cover Crops ◽  
Cover Crop ◽  
Conservation Tillage ◽  
Suitable Habitat ◽  
Grain Production ◽  
Seeding Rate ◽  
Atlantic Region ◽  
Trade Off ◽  
No Till ◽  
Crop Biomass

AbstractOrganic producers in the mid-Atlantic region of the USA are interested in reducing tillage, labor and time requirements for grain production. Cover crop-based, organic rotational no-till grain production is one approach to accomplish these goals. This approach is becoming more viable with advancements in a system for planting crops into cover crop residue flattened by a roller–crimper. However, inability to consistently control weeds, particularly perennial weeds, is a major constraint. Cover crop biomass can be increased by manipulating seeding rate, timing of planting and fertility to achieve levels (>8000 kg ha−1) necessary for suppressing summer annual weeds. However, while cover crops are multi-functional tools, when enhancing performance for a given function there are trade-off with other functions. While cover crop management is required for optimal system performance, integration into a crop rotation becomes a critical challenge to the overall success of the production system. Further, high levels of cover crop biomass can constrain crop establishment by reducing optimal seed placement, creating suitable habitat for seed- and seedling-feeding herbivores, and impeding placement of supplemental fertilizers. Multi-institutional and -disciplinary teams have been working in the mid-Atlantic region to address system constraints and management trade-off challenges. Here, we report on past and current research on cover crop-based organic rotational no-till grain production conducted in the mid-Atlantic region.

Effects of Different Management Methods for Sunn-Hemp Cover Crop on Corn Production in a No-Till System in Cambodia

2021 ◽  
Vol 37 (5) ◽  
pp. 805-818
Author(s):  
Lyhour Hin ◽  
Ted S. Kornecki ◽  
Manuel R. Reyes ◽  
Borarin Bunthong ◽  
Lyda Hok ◽  
...  
Keyword(s):  
Cover Crop ◽  
Crop Yields ◽  
Conservation Agriculture ◽  
Growth And Yield ◽  
List Type ◽  
Long Term Effects ◽  
Seeding Rate ◽  
No Till ◽  
Sunn Hemp ◽  
Residue Retention

Highlights Soil type, operational speed, machinery weight, and power size affected corn seeding rate and seeding efficiency Corn growth and yield was affected by seeder type, so utilization of appropriate machinery is very important Having cover crop residue on the land can maintain soil moisture for a longer time than tilled land Abstract.Conservation agriculture (CA) is gaining popularity in Cambodia to sustain soil fertility, productivity, and profits. However, the adoption remains slow due to the low engagement so far of local services into CA machinery and technology. Therefore, this paper aimed to compare different no-till seeders and residue retention methods for corn (Zea mays L.) sowing and to determine their effects on growth and yield. The experiment was conducted in Rattanak Mondul District, Battambang Province, in the wet season of 2019. Sunn hemp (Crotalaria juncea L.) was grown as a cover crop for 74 days prior to corn. Each main plot was 14 × 34 m and was subdivided lengthwise with 4.0-m buffers for operations of two different seeders, namely one-row Morrison seeder mounted on 14 kW Oggun tractor and four-row Brazilian seeder mounted on 56 kW John Deere tractor. The results show that using Brazilian seeder saved around 50% of seed and 80% of time, when compared with Morrison seeder. Plant population, plant diameter, and kernel characteristics were also significantly greater with Brazilian seeder, when compared to the Morrison seeder. A combination of the Brazilian seeder and Cambodia made crimper plots had larger ear size and weight. Volumetric Moisture Content (VMC) was significantly affected by residue retention with higher VMC for rolled and crimped residue compared to disked/incorporated residue. The study demonstrates that using no-till equipment such as roller crimpers and no-till planters is feasible in Cambodia’s small farming systems although more research is needed to study long-term effects on crop yields and soil health. Keywords: Battambang Province, Conservation agriculture, Green manure, Soil improvements

The effects of integrating a cereal rye cover crop with herbicides on glyphosate-resistant horseweed (Conyza canadensis) in no-till soybean

Weed Science ◽  
2020 ◽  
Vol 68 (5) ◽  
pp. 527-533
Author(s):  
Alyssa I. Essman ◽  
Mark M. Loux ◽  
Alexander J. Lindsey ◽  
Anthony F. Dobbels ◽  
Emilie E. Regnier
Keyword(s):  
Cover Crops ◽  
Cover Crop ◽  
Plant Density ◽  
Field Studies ◽  
Planting Date ◽  
Conyza Canadensis ◽  
Seeding Rate ◽  
Cereal Rye ◽  
No Till ◽  
Herbicide Treatment

AbstractCurrent recommendations for the control of glyphosate-resistant horseweed [Conyza canadensis (L.) Cronquist var. canadensis] in soybeans [Glycine max (L.) Merr.] consist of comprehensive herbicide programs, which often include herbicide applications outside the soybean growing season. Integration of cover crops with herbicides could potentially improve C. canadensis control and allow for a reduction in herbicide inputs. Two separate field studies were conducted from 2016 through 2018 with the objectives of: (1) determining the effect of planting date and seeding rate of a cereal rye (Secale cereale L.) cover crop on C. canadensis population density and control in the subsequent soybean crop; and (2) determining whether the cover crop could replace a fall herbicide treatment or allow for a reduction in the use of spring-applied residual herbicides. There was no effect of rye planting date, late September versus late October, on C. canadensis density in either study. In 2016 to 2017, C. canadensis density was greater in the absence of a rye cover crop in both studies, but otherwise not affected by seeding rates of 50 versus 100 kg ha−1. In the 2017 to 2018 season, the presence of rye resulted in an increased C. canadensis density in the spring residual herbicide study (Study I), and had no effect in the fall herbicide study (Study II). Conyza canadensis densities were lowest in the treatments where a comprehensive spring residual or fall herbicide treatment had been applied, averaged over rye planting date and seeding rate. Earlier-planted rye at a higher seeding rate produced the most biomass but did not result in lower C. canadensis densities. These results suggest that cereal rye planted at a density of 50 kg ha−1 as a cover crop before no-till soybeans may be sufficient to reduce glyphosate-resistant C. canadensis plant density, but cannot be relied upon to reduce the need for fall herbicide treatments and spring residual programs.

scholarly journals Cover Crop Complements Flue Gas Desulfurized Gypsum to Improve No-till Soil Quality

2021 ◽  
pp. 1-22
Author(s):  
Khandakar R. Islam ◽  
Greg Roth ◽  
Mohammad A. Rahman ◽  
Nataliia O. Didenko ◽  
Randall C. Reeder
Keyword(s):  
Soil Quality ◽  
Flue Gas ◽  
Cover Crop ◽  
No Till

Precision planting impacts on winter cereal rye growth, nutrient uptake, spring soil temperature and adoption cost

2021 ◽  
pp. 1-6
Author(s):  
Amir Sadeghpour ◽  
Oladapo Adeyemi ◽  
Dane Hunter ◽  
Yuan Luo ◽  
Shalamar Armstrong
Keyword(s):  
Nutrient Uptake ◽  
Mississippi River ◽  
Cover Crop ◽  
N Immobilization ◽  
Future Research ◽  
Similar Amount ◽  
Seeding Rate ◽  
Winter Cereal ◽  
Cereal Rye ◽  
Precision Planting

Abstract Growing winter cereal rye (Secale cereale) (WCR) has been identified as an effective in-field practice to reduce nitrate-N and phosphorus (P) losses to Upper Mississippi River Basin, USA. In the Midwestern USA, growers are reluctant to plant WCR especially prior to corn (Zea mays L.) due to N immobilization and establishment issues. Precision planting of WCR or ‘skipping the corn row’ (STCR) can minimize some issues associated with WCR ahead of corn while reducing cover crop seed costs. The objective of this study was to compare the effectiveness of ‘STCR’ vs normal planting of WCR at full seeding rate (NP) on WCR biomass, nutrient uptake and composition in three site-yrs (ARC2019, ARC2020, BRC2020). Our results indicated no differences in cover crop dry matter biomass production between the STCR (2.40 Mg ha−1) and NP (2.41 Mg ha−1) supported by similar normalized difference vegetative index and plant height for both treatments. Phosphorus, potassium (K), calcium (Ca) and magnesium (Mg) accumulation in aboveground biomass was only influenced by site-yr and both STCR and NP removed similar amount of P, K, Ca and Mg indicating STCR could be as effective as NP in accumulating nutrients. Aboveground carbon (C) content (1086.26 kg h−1 average over the two treatments) was similar between the two treatments and only influenced by site-yr differences. Lignin, lignin:N and C:N ratios were higher in STCR than NP in one out of three site-yrs (ARC2019) indicating greater chance of N immobilization when WCR was planted later than usual. Implementing STCR saved $8.4 ha−1 for growers and could incentivize growers to adopt this practice. Future research should evaluate corn response to STCR compared with NP and assess if soil quality declines by STCR practice over time.

Grazing winter rye cover crop in a cotton no‐till system: Soil strength and runoff

2021 ◽  
Author(s):  
Harry H. Schomberg ◽  
Dinku M. Endale ◽  
Kipling S. Balkcom ◽  
Randy L. Raper ◽  
Dwight H. Seman
Keyword(s):  
Cover Crop ◽  
Soil Strength ◽  
Winter Rye ◽  
No Till

EFFECT OF CULTIVATION AND NITROGEN ON FRUIT QUALITY, YIELD AND COLOR OF McINTOSH APPLES GROWN IN IRRIGATED GRASS SOD COVER CROP

1969 ◽  
Vol 49 (2) ◽  
pp. 149-154 ◽  
Author(s):  
J. L. Mason
Keyword(s):  
Nitrogen Fertilization ◽  
Cover Crop ◽  
Nitrogen Concentration ◽  
Titratable Acidity ◽  
Fruit Color ◽  
Soluble Solids ◽  
Apple Trees ◽  
Pressure Test ◽  
Nitrogen Treatments ◽  
Plot Design

Nitrogen treatments from 0.15 to 0.90 kg of nitrogen and cultivation treatments from zero to three shallow rotovations were applied in a split-plot design to 30-year-old McIntosh apple trees growing in irrigated grass sod.Fruit quality was very largely unaffected by the treatments. Pressure test after harvest was reduced from 6.61 to 6.44 kg (P = 0.10) as nitrogen increased. Number of rots increased from 2.7 to 3.9 per 60-fruit sample with increasing nitrogen. Titratable acidity and soluble solids after harvest and pressure test, titratable acidity, soluble solids, stem-cavity browning and core flush in tests after storage were all unchanged. In addition, none of these tests were affected by cultivation except pressure test, which decreased with more cultivation (P = 0.10).Yield was not changed by either the nitrogen or the cultivation treatments, and terminal length increased only slightly with more cultivation. However, nitrogen concentration in the leaf was increased from 1.90 to 1.98% by the nitrogen treatments and from 1.83 to 1.98% by increasing cultivation. Extra Fancy grade was reduced and C grade increased by increasing nitrogen (P = 0.10), but cultivation had no effect.The conclusion is drawn that grass sod can very largely eliminate the effect of widely different nitrogen fertilization levels on McIntosh apple, and that moderate cultivation changes this effect only slightly. In many mature orchards of high initial fertility, nitrogen fertilizer may be required in only small amounts or even not at all for optimum fruit color.

Sign in / Sign up

Export Citation Format

Share Document