scholarly journals Development and Validation of a Stability-Indicating Method for the Quantitation of Paclitaxel in Pharmaceutical Dosage Forms

2009 ◽  
Vol 47 (7) ◽  
pp. 599-604 ◽  
Author(s):  
A. Mohammadi ◽  
F. Esmaeili ◽  
R. Dinarvand ◽  
F. Atyabi ◽  
R. B. Walker
2017 ◽  
Vol 5 (03) ◽  
pp. 01-06 ◽  
Author(s):  
Gorja Ashok ◽  
Sumantha Mondal

A Stability Indicating Ultra-Performance Liquid Chromatography method was developed and validated for quantification of Axitinib in tablets. The chromatographic separation was done in an isocratic mode using the STD RP-18 Endcapped (50mm × 4.6mm, 2μ particle size) column. The mobile phase 0.1% OPA and acetonitrile 55:45 (%v/v) at the flow rate of 0.2mL/min and at ambient temperature was used. The wavelength used for detection was 249nm. The retention time for Axitinib was found to 1.03min. Axitinib was linear in the concentration range of 12.5μg/mL to 75μg/mL respectively. The developed method was validated and found to be accurate, specific and robust. The drug was subjected to the stressed conditions like acidic, basic, oxidative, photolytic, thermal and neutral conditions. The degradation results are found satisfactory. This method can be applied for the estimation of Axitinib in pharmaceutical dosage forms.


2020 ◽  
Vol 10 (6) ◽  
pp. 6610-6618

A Simple, selective, accurate, precise, linear, and stability-indicating RP-HPLC method was developed and validated for the estimation of Cinacalcet hydrochloride in bulk and tablet dosage forms. Chromatographic separation was achieved on X-Terra Symmetry C18 (4.6 x 150mm; 5 m) with mobile phase containing Phosphate buffer: Acetonitrile (40:60 v/v) pH adjusted to 3.0 ±0.05 with diluted ortho-phosphoric acid. The flow rate was maintained at 0.9 mL/min. The eluent was monitored at 282 nm. Moreover, the retention time of Cinacalcet was 2.8 minutes. The method was validated for linearity, accuracy, precision, and robustness as per ICH guidelines. The developed method was found linear between 25-150 μg/ml, and the linear regression coefficient was 0.999. The % RSD values are less than 2 % indicating the accuracy and precision of the method. The percentage of recovery was obtained from 98-102%. The system suitability parameters were found to be within the limit. Forced degradation studies were conducted under various conditions. The proposed method is simple, rapid, precise, and accurate. It can be used for the quantitation of Cinacalcet hydrochloride in bulk and commercial pharmaceutical dosage forms.


Author(s):  
S. Lakshmana Prabu ◽  
S Thiyagarajan ◽  
P Balan ◽  
T N K Suriyaprakash ◽  
Sharavanan S P

A simple, economic, selective, precise, rapid and reproducible stability indicating HPLC method for the analysis of coumarin (CMN) in bulk drugs and from pharmaceutical formulation has been developed and validated. Separation was achieved on a symmetry C18 column using a mobile phase consisting of a mixture of methanol:water in the ratio of (70:30%v/v) at a flow rate of 1ml/min with detection at 276 nm. Linear regression analysis data for the calibration revealed a good linear relationship between response and concentration in the range 2 μgml-1 to 14 μg ml1 of CMN; the correlation coefficient was 0.999. The LOD and LOQ were 30 and 100 ng ml-1 respectively. The method was validated for accuracy, precision, recovery, reproducibility, specificity, robustness and degradation studies. The statistical analysis showed the method to be precise, reproducible, selective, specific and accurate for analysis and estimation of coumarin in bulk drugs and pharmaceutical dosage forms. 


Sign in / Sign up

Export Citation Format

Share Document