Fibrous g-C3N4@Tio2 Nanocomposites-Based Dispersive Micro-Solid Phase Extraction for Chromium Speciation in Cow Milk by ICP-MS after Digestion Treatment with Artificial Gastric Juice

2020 ◽  
Author(s):  
Shizhong Chen ◽  
Yuxiu Liu ◽  
Juntao Yan ◽  
Chunlei Wang ◽  
Dengbo Lu
Keyword(s):  
Solid Phase Extraction ◽  
Gastric Juice ◽  
Solid Phase ◽  
Selective Adsorption ◽  
Cow Milk ◽  
Phase Extraction ◽  
Digestion Solution ◽  
Icp Ms ◽  
Relative Standard ◽  
Artificial Gastric Juice

Abstract Background Chromium is an interesting element because its toxicity depends on its speciation. Thus, knowledge of Cr speciation in cow milk is essential to human health. Objective This study aims to achieve real bioaccessible species in cow milk, including Cr(III), Cr(VI), residual, digestible, and total Cr. Methods Samples were treated with artificial gastric juice, followed by dispersive micro-solid phase extraction (DMSPE) combined with ICP-MS for Cr speciation. Fibrous g-C3N4@TiO2 nanocomposites (FGCTNCs) were used as a novel adsorbent for DMSPE. Results The method detection limits were 110 pg/g (Cr(III)) and 260 pg/g (Cr(VI)) for milk powder (0.1 g), and 5.1 pg/g (Cr(III)) and 13 pg/g (Cr(VI)) for liquid cow milk (2 mL). The relative standard deviations (RSDs), obtained by analyzing the standard solutions containing 1.0 ng/mL of the analytes in sequence for nine times, were 4.3% and 5.1% for Cr(III) and Cr(VI), respectively. Linearity was observed over the range of 4 magnitude orders with correlation coefficients better than 0.9961. The enrichment factor of 100 was obtained. The majority of Cr in the samples was transferred into digestion solution. The content of Cr(III) is much higher than that of Cr(VI) in the digestion solution. Conclusions This method has the advantages of reduced solvent consumption, less adsorbent dosage, and high extraction efficiency. It may become a valuable strategy for elemental species in food samples. Highlights The samples were treated with artificial gastric juice to avoid the inter-conversion of species. FGCTNCs exhibit the merits of N-rich functional groups and selective adsorption for the analytes.

scholarly journals Preparation of Ampicillin Surface Molecularly Imprinted Polymers for Its Selective Recognition of Ampicillin in Eggs Samples

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Yang Tian ◽  
Yue Wang ◽  
Shanshan Wu ◽  
Zhian Sun ◽  
Bolin Gong
Keyword(s):  
Solid Phase Extraction ◽  
Solid Phase ◽  
Selective Adsorption ◽  
Water Soluble ◽  
Penicillin G ◽  
Scatchard Analysis ◽  
Template Molecule ◽  
Phase Extraction ◽  
Imprinted Polymers ◽  
Relative Standard

Surface-imprinted polymers (MIPs) microspheres with the ability to specifically recognize water-soluble molecules were prepared using self-made monodisperse porous poly(chloromethylstyrene-co-divinylbenzene) beads as the solid-phase matrix and ampicillin (AMP) as the template molecule. MIPs were synthesized using different template molecule: monomer: crosslinker ratios and the optimum preparation ratio were obtained by measuring adsorption. The maximum equilibrium amount of adsorption by the MIPs reached 115.62 mg/g. Scatchard analysis indicated that the MIPs contained two types of recognition sites: specific and nonspecific. Based on the adsorption kinetics, adsorption equilibrium was reached after 30 minutes. Penicillin G, amoxicillin, and sulbactam acid were used as competitive molecules to research the selective adsorption capacity of the MIPs. The imprinted material was found to have good selectivity with selectivity coefficients for penicillin G, amoxicillin, and sulbactam acid of 5.74, 6.83, and 7.25, respectively. The MIPs were used as solid-phase extraction filler, resulting in successful enrichment and separation of ampicillin residue from egg samples. Standard addition recovery experiments revealed that recovery was good with recoveries from the spiked samples ranging from 91.5 to 94.9% and relative standard deviations from 3.6 to 4.2%. The solid-phase extraction MIPs microcolumn was reused 10 times, where it maintained a recovery rate of over 80%. This work presents a sensitive, fast, and convenient method for the determination of trace ampicillin in food samples.

Molecularly imprinted solid phase extraction in an efficient analytical protocol for indole-3-methanol determination in artificial gastric juice

RSC Advances ◽  
2016 ◽  
Vol 6 (110) ◽  
pp. 108801-108809 ◽  
Author(s):  
Dorota Klejn ◽  
Piotr Luliński ◽  
Dorota Maciejewska
Keyword(s):  
Solid Phase Extraction ◽  
Gastric Juice ◽  
Solid Phase ◽  
Phase Extraction ◽  
Molecularly Imprinted ◽  
Separation Step ◽  
Analytical Protocol ◽  
Artificial Gastric Juice

Molecularly imprinted solid phase extraction was employed in separation step of new and efficient analytical protocol for analysis of indole-3-methanol.

Factorial Design Optimisation of Solid Phase Extraction for Preconcentration of Parabens in Wastewater Using Ultra-High Performance Liquid Chromatography Triple Quadrupole Mass Spectrometry

2020 ◽  
Vol 16 (4) ◽  
pp. 436-446
Author(s):  
Vallerie A. Muckoya ◽  
Philiswa N. Nomngongo ◽  
Jane C. Ngila
Keyword(s):  
Solid Phase Extraction ◽  
Formic Acid ◽  
Factorial Design ◽  
Solid Phase ◽  
Treatment Plant ◽  
Phase Extraction ◽  
Limit Of Quantification ◽  
Analytical Technique ◽  
Relative Standard ◽  
Simulated Wastewater

Background: Parabens are synthetic esters used extensively as preservatives and/or bactericides in personal care personal products. Objective: Development and validation of a novel robust chemometric assisted analytical technique with superior analytical performances for the determination of ethylparaben, methylparaben and propylparaben, using simulated wastewater matrix. Methods: An automated Solid Phase Extraction (SPE) method coupled with liquid chromatographymass spectrometry was applied in this study. A gradient elution programme comprising of 0.1% formic acid in deionised water (A) and 0.1% formic acid in Methanol (B) was employed on a 100 x 2.1 mm, 3.0 μm a particle size biphenyl column. Two-level (2k) full factorial design coupled with response surface methodology was used for optimisation and investigation of SPE experimental variables that had the most significant outcome of the analytical response. Results: According to the analysis of variance (ANOVA), sample pH and eluent volume were statistically the most significant parameters. The method developed was validated for accuracy, precision, Limits of Detection (LOD) and Limit of Quantification (LOQ) and linearity. The LOD and LOQ established under those optimised conditions varied between 0.04-0.12 μgL−1 and 0.14-0.40 μgL−1 respectively. The use of matrix-matched external calibration provided extraction recoveries between 78-128% with relative standard deviations at 2-11% for two spike levels (10 and 100 μgL-1) in three different water matrices (simulated wastewater, influent and effluent water). Conclusion: The newly developed method was applied successfully to the analyses of parabens in wastewater samples at different sampling points of a wastewater treatment plant, revealing concentrations of up to 3 μgL−1.

Green Dispersive Micro Solid-Phase Extraction using Multiwalled Carbon Nanotubes for Preconcentration and Determination of Cadmium and Lead in Food, Water, and Tobacco Samples

2020 ◽  
Vol 16 (4) ◽  
pp. 381-392
Author(s):  
Ayman A. Gouda ◽  
Ali H. Amin ◽  
Ibrahim S. Ali ◽  
Zakia Al Malah
Keyword(s):  
Carbon Nanotubes ◽  
Solid Phase Extraction ◽  
Multiwalled Carbon Nanotubes ◽  
Solid Phase ◽  
Certified Reference Materials ◽  
Phase Extraction ◽  
Multiwalled Carbon ◽  
Flame Atomic Absorption ◽  
Relative Standard ◽  
Separation And Preconcentration

Background: Cadmium (Cd2+) and lead (Pb2+) have acute and chronic effects on humans and other living organisms. In the present work, new, green and accurate dispersive micro solid-phase extraction (DμSPE) method for the separation and preconcentration of trace amounts of cadmium (Cd2+) and lead (Pb2+) ions in various food, water and tobacco samples collected from Saudi Arabia prior to its Flame Atomic Absorption Spectrometric (FAAS) determinations was developed. Methods: The proposed method was based on a combination of oxidized multiwalled carbon nanotubes (O-MWCNTs) with a new chelating agent 5-benzyl-4-[4-methoxybenzylideneamino)-4H- 1,2,4-triazole-3-thiol (BMBATT) to enrich and separate trace levels of Cd2+ and Pb2+. The effect of separation parameters was investigated. The validation of the proposed preconcentration procedure was performed using certified reference materials. Results: Analyte recovery values ranged from 95-102%, indicating that the method is highly accurate. Furthermore, precision was demonstrated by the relative standard deviation (RSD < 3.0%). The limits of detection were 0.08 and 0.1 μg L−1 for Cd2+ and Pb2+ ions, respectively. The preconcentration factor was 200. Conclusion: The proposed method was used for the estimation of Cd2+ and Pb2+ ion content in various real samples, and satisfactory results were obtained. The proposed method has high adsorption capacity, rapid adsorption equilibrium, extremely low LODs, high preconcentration factors and shortens the time of sample preparation in comparison to classical SPE.

Development of a solid-phase extraction – spectrofluorimetric method for trace glutathione determination

2011 ◽  
Vol 89 (4) ◽  
pp. 517-523 ◽  
Author(s):  
Ke-Jing Huang ◽  
Cong-Hui Han ◽  
Ying-Ying Wu ◽  
Chao-Qun Han ◽  
De-Jun Niu ◽  
...  
Keyword(s):  
Solid Phase Extraction ◽  
Limit Of Detection ◽  
Solid Phase ◽  
Signal To Noise Ratio ◽  
Calibration Graph ◽  
Extraction Column ◽  
Phase Extraction ◽  
Selective Reaction ◽  
Spectrofluorimetric Method ◽  
Relative Standard

A simple and efficient solid-phase extraction – spectrofluorimetric method has been developed to determine glutathione (GSH). Fluorescent probe N-(4,4-difluoro-5,7-dimethyl-4-bora-3a,4a-diaza-s-indacene-3-yl)methyl)iodoacetamide (BODIPY Fl-C1-IA) was used as the derivatization reagent. The procedure was based on a BODIPY Fl-C1-IA selective reaction with GSH to form the highly fluorescent product BODIPY Fl-C1-IA–GSH, using a solid-phase extraction column and spectrofluorimetric determination. The variables affecting analytical performance were studied and optimized. The calibration graph using the preconcentration system for GSH was linear over the range of 1–200 nmol/L with a limit of detection of 0.05 nmol/L (signal-to-noise ratio = 3). The relative standard deviation for six replicate determinations of GSH at the 100 nmol/L concentration level was 3.9%. The method was applied to water samples and average recoveries between 87.5% and 111.5% were obtained for spiked samples.

scholarly journals Solid-Phase Extraction and Reverse-Phase HPLC: Application to Study the Urinary Excretion Pattern of Benzophenone-3 and its Metabolite 2,4-Dihydroxybenzophenone in Human Urine

2008 ◽  
Vol 3 ◽  
pp. ACI.S396 ◽  
Author(s):  
Helena Gonzalez ◽  
Carl-Eric Jacobson ◽  
Ann-Marie Wennberg ◽  
Olle Larkö ◽  
Anne Farbrot
Keyword(s):  
Solid Phase Extraction ◽  
Urinary Excretion ◽  
Human Urine ◽  
Solid Phase ◽  
Whole Body ◽  
Phase Extraction ◽  
Reverse Phase Hplc ◽  
Reverse Phase ◽  
Excretion Pattern ◽  
Relative Standard

Background Benzophenone-3 (BZ-3) is a common ultraviolet (UV) absorbing compound in sunscreens. It is the most bioavailable species of all UV-absorbing compounds after topical application and can be found in plasma and urine. Objectives The aim of this study was to develop a reverse-phase high performance liquid chromatography (HPLC) method for determining the amounts BZ-3 and its metabolite 2,4-dihydroxybenzophenone (DHB) in human urine. The method had to be suitable for handling a large number of samples. It also had to be rapid and simple, but still sensitive, accurate and reproducible. The assay was applied to study the urinary excretion pattern after repeated whole-body applications of a commercial sunscreen, containing 4% BZ-3, to 25 healthy volunteers. Methods Each sample was analyzed with regard to both conjugated/non-conjugated BZ-3 and conjugated/non-conjugated DHB, since both BZ-3 and DHB are extensively conjugated in the body. Solid-phase extraction (SPE) with C8 columns was followed by reverse-phase HPLC. For separation a Genesis C18 column was used with an acethonitrile-water mobile phase and the UV-detector was set at 287 nm. Results The assay was linear r 2 > 0.99, with detection limits for BZ-3 and DHB of 0.01 µmol L-1 and 0.16 µmol L-1 respectively. Relative standard deviation (RSD) was less than 10% for BZ-3 and less than 13% for DHB. The excretion pattern varied among the human volunteers; we discerned different patterns among the individuals. Conclusions The reverse-phase HPLC assay and extraction procedures developed are suitable for use when a large number of samples need to be analyzed and the method fulfilled our objectives. The differences in excretion pattern may be due to differences in enzyme activity but further studies, especially about genetic polymorphism, need to be performed to verify this finding.

Sign in / Sign up

Export Citation Format

Share Document