224 Amino Acid Imbalance with Excess Methionine in Late-finishing Pigs: Effects on Performance and Carcass Quality

2021 ◽  
Vol 99 (Supplement_3) ◽  
pp. 117-118
Author(s):  
Michael S Edmonds ◽  
James W Smith
Keyword(s):  
Growth Rate ◽  
Slow Growth ◽  
Carcass Quality ◽  
Finishing Pigs ◽  
Initial Weight ◽  
Slow Growth Rate ◽  
Feeding Programs ◽  
Low Protein ◽  
Amino Acid Imbalance ◽  
Facility Capacity

Abstract Limitations in harvest facility capacity can necessitate feeding programs to slow growth rate in late-finishing pigs. In Trial 1, six dietary regimens were used with 423 pigs (initial weight, 109 kg) randomly allotted in a 35 d study. The regimens consisted of: 1) Con (11.7% CP diet), 2) Low Protein (LP 8.8% CP), 3) Methionine (Met) 1% (LP plus 1% added Met for 35 d), 4) Met 1–1.8% (LP plus 1, 1.2, 1.4, 1.6 and 1.8% added Met for d 0–7, 7–14, 14–21, 21–28 and 28–35 d, respectively), 5) Met 2% (LP plus 2% added Met for 35 d) and 6) Met 1.5–2.3% (LP plus 1.5, 1.7, 1.9, 2.1 and 2.3%, added Met for d 0–7, 7–14, 14–21, 21–28 and 28–35 d, respectively). Pigs on Met 1% had reduced overall ADG and ADFI (P < 0.05) with similar G:F vs. pigs on LP. Compared to pigs on Met 1%, pigs on Met 1–1.8%, Met 2%, and Met 1.5–2.3% had reduced (P < 0.05) ADG of 28, 54 and 53%, respectively; and decreased (P < 0.05) ADFI of 12, 26 and 26%, respectively. In Trial 2, three regimens were used with 393 pigs (initial weight, 109 kg) in a 35 d study. The regimens consisted of 1) Met 2%, 2) Met 1.5–2.3% and 3) Met 2.0–2.8% (LP plus 2.0, 2.2, 2.4, 2.6 and 2.8% added Met for d 0–7, 7–14, 14–21, 21–28 and 28–35 d, respectively). Regimens 1 and 2 were identical to Trial 1. Overall, pigs on Met 1.5–2.3% had ADG and ADFI which were greater (P < 0.001) compared to pigs on Met 2%. Pigs on Met 2–2.8% had an overall ADG and ADFI which were less (P < 0.05) than those pigs on Met 2%. These data suggest that growth can be manipulated with excess Met.

scholarly journals Amino acid imbalance with excess methionine in late-finishing pigs: effects on performance and carcass quality

2021 ◽  
Author(s):  
Michael S Edmonds ◽  
James W Smith
Keyword(s):  
Amino Acid ◽  
Positive Control ◽  
Feeding Strategies ◽  
Finishing Pigs ◽  
Initial Weight ◽  
Slow Growth Rate ◽  
Effective Manner ◽  
Amino Acid Imbalance ◽  
Dietary Treatments ◽  
Facility Capacity

Abstract Limitations in harvest facility capacity can necessitate feeding strategies to slow growth rate in late-finishing pigs. In Exp. 1, six dietary treatments were used with 423 late-finishing pigs (initial weight of 109.5 kg) randomly allotted (mixed-sex) across 24 pens in a 35 d study. The treatments consisted of: 1) Positive Control (PC, 11.7% CP (Crude Protein) diet with added amino acids (AA), 2) Methionine (Met) 0% (8.8% CP with added AA), 3) Met 1% (8.8% CP with added AA plus 1% added Met for 35 d), 4) Met 1-1.8% (8.8% CP with added AA plus 1, 1.2, 1.4, 1.6 and 1.8% added Met for d 0-7, 7-14, 14-21, 21-28 and 28-35 d, respectively), 5) Met 2% (8.8% CP with added AA plus 2% added Met for 35 d) and 6) Met 1.5-2.3% (8.8% CP with added AA plus 1.5, 1.7, 1.9, 2.1 and 2.3% added Met for d 0-7, 7-14, 14-21, 21-28 and 28-35 d, respectively). Overall, pigs on the PC had improved ADG and G:F (P < 0.05) compared to the other five treatments. Pigs on Met 1% had reduced overall ADG and ADFI (P < 0.05) with similar G:F compared to pigs on Met 0%. Compared to pigs on Met 1%, pigs on Met 1-1.8%, Met 2%, and Met 1.5-2.3% had reduced (P < 0.05) ADG of 28, 54 and 53%, respectively; and decreased (P < 0.05) ADFI of 12, 26 and 26%, respectively. Dressing percent was similar among all six treatments. In Exp. 2, three dietary treatments were used with 393 late-finishing pigs (average initial weight was 108.8 kg) randomly allotted (mixed-sex) across 24 pens in a 35-d study. The treatments consisted of 1) Met 2%, 2) Met 1.5-2.3% and 3) Met 2.0-2.8% (8.8% CP with added AA plus 2.0, 2.2, 2.4, 2.6 and 2.8% added Met for d 0-7, 7-14, 14-21, 21-28 and 28-35 d, respectively). Treatments 1 and 2 were identical to Exp. 1. Overall, pigs on Met 1.5-2.3% had ADG of 241 g and ADFI of 2,040 g which were greater (P < 0.001) compared to pigs on Met 2% with ADG of 57 g and ADFI of 1,515 g. Furthermore, pigs on Met 2-2.8% had an overall ADG of -62 g and ADFI of 1,254 g which were less (P < 0.05) than those pigs on Met 2%. Percent lean and dressing percent were similar among the three treatments. These data suggest that late-finishing growth can be manipulated in a concise and effective manner by creating amino acid imbalances with varying levels of excess Met.

scholarly journals Evaluation of nutritional strategies to slow growth rate then induce compensatory growth in 90-kg finishing pigs

2021 ◽  
Author(s):  
Zhong-Xing Rao ◽  
Mike D Tokach ◽  
Jason C Woodworth ◽  
Joel M DeRouchey ◽  
Robert D Goodband ◽  
...  
Keyword(s):  
Amino Acids ◽  
Growth Rate ◽  
Compensatory Growth ◽  
Slow Growth ◽  
Control Diet ◽  
Finishing Pigs ◽  
Slow Growth Rate ◽  
Compensatory Gain ◽  
Nutritional Strategies

Abstract Two 44-d experiments were conducted to evaluate nutritional strategies with different concentrations of dietary lysine (and other amino acids) on growth rate and subsequent compensatory gain of 90-kg finishing pigs. Three diets were formulated to contain 0.70 (control), 0.50 and 0.18% standardized ileal digestible (SID) Lys. In Exp. 1, 356 pigs (Line 241 × 600, DNA; initially 89.0 ± 1.10 kg) were used with 4 treatments. From d 0 to 28, pigs received either the control or the 0.50%-Lys diet. On d 28, pigs either remained on these diets or were switched the 0.18%-Lys diet until d 44. There were 18 pens per treatment from d 0 to 28 and 9 pens per treatment from d 28 to 44. From d 0 to 28, pigs fed the 0.50%-Lys diet had decreased (P < 0.001) ADG and G:F compared to those fed the control diet. From d 28 to 44, pigs switched to the 0.18%-Lys diet had decreased (P < 0.05) ADG and G:F compared to pigs that remained on the control or 0.50%-Lys diets. From d 0 to 44, pigs fed 0.50%-Lys diet for 44-d had decreased (P < 0.05) ADG, G:F, and percentage carcass lean compared to pigs fed the control diet. Pigs fed the 0.50%-Lys diet then the 0.18%-Lys diet had decreased (P < 0.05) ADG and G:F compared to other treatments. Pigs fed the 0.50%-Lys diet for 44-d and pigs fed the control diet then 0.18%-Lys diet had decreased (P < 0.05) ADG, G:F, and percentage carcass lean compared to control pigs. In Exp. 2, 346 pigs (Line 241 × 600, DNA; initially 88.6 ± 1.05 kg) were used to evaluate compensatory growth after varying durations of dietary lysine restriction. A total of four treatments were used including pigs fed the control diet for 44-d or fed the 0.18%-Lys diet for 14, 21, or 28-d and then fed the control diet until the conclusion of the experiment on d 44. There were 9 pens per treatment. On average, pigs fed the 0.18%-Lys diet grew 49% slower than the control. Compared to the control, ADG of pigs previously fed the 0.18%-Lys diet increased (P < 0.05) 28% during the first week after switching to the control diet and 12% for the rest of the trial. Despite this improvement, overall ADG, G;F, final BW, and percentage carcass lean decreased (linear, P < 0.05) as the duration of Lys restriction increased. In summary, feeding Lys-restricted diets reduced the ADG and G:F of finishing pigs. Compensatory growth can be induced in Lys-restricted finishing pigs, but the duration of restriction and recovery influences the magnitude of compensatory growth.

Time-Energy Budgets During Reproduction and the Evolution of Single Parenting in the Superb Lyrebird

1986 ◽  
Vol 34 (3) ◽  
pp. 351 ◽  
Author(s):  
A Lill
Keyword(s):  
Growth Rate ◽  
Brood Size ◽  
Slow Growth ◽  
Bird Species ◽  
Egg Laying ◽  
Energy Budgets ◽  
Brood Care ◽  
Single Parenting ◽  
Slow Growth Rate ◽  
Small Brood

Estimated expenditures on brood-care by unassisted female superb lyrebirds, obtained through time-energy budgeting, were compared with published values for other bird species. With the exception of nestbuilding, estimated daily expenditures were relatively low, due mainly to the small brood size and low level of parental attentiveness. It is suggested that the traits which reduce daily brood-care expenditures, particularly the small brood size and extremely slow growth rate, may have evolved as adaptations which enabled deserted females operating close to maximal capacity to cope with single-parenting. Male parental involvement could probably increase the growth rate of the young, but not brood size; moreover, egg- laying was sufficiently asynchronous to afford multiple mating opportunities to parentally emancipated males. However, the slow growth rate of the young results in relatively large overall brood-care expenditures for females. Investments by males of up to 50% of daylight hours and 45% of BMR on singing at the height of the mating season were comparable with those of partially emancipated, polygynous males of other species. They probably reflect the high level of competition to control good display areas and to advertise status and quality to widely spaced females.

scholarly journals Effect of physiological age of stem and IBA treatment on rooting of branch cuttings of Taxus baccata L.

1970 ◽  
pp. 01-07
Author(s):  
Saumitro Das ◽  
L.K. Jha
Keyword(s):  
Growth Rate ◽  
Large Scale ◽  
Slow Growth ◽  
Physiological Age ◽  
Taxus Baccata ◽  
Practical Solution ◽  
Slow Growth Rate ◽  
Rooting Response ◽  
Himalayan Yew ◽  
Rooting Capacity

The natural population of Taxus baccata L. (Himalayan Yew) throughout the Indian Himalayan Region is greatly reduced due to its extensive and reckless exploitation for “Taxol” an anticancer drug. The effects of overexploitation are exacerbated by the species poor regeneration process, slow growth rate and prolonged seed dormancy. Therefore vegetative propagation by branch cuttings seems to be only practical solution for its large scale multiplication. A study was conducted on six candidate trees (CTs) to examine the effect genotype, physiological age of stem, IBA treatment on rooting of Taxus baccata cuttings. Results revealed that rooting behaviour of cuttings was significantly affected by all the factors under study. Among the six CTs studied, CT 2 (from BSI, Shillong) had given the highest rooting response (46.28%). The juvenile cuttings have the higher rooting capacity; however the callusing was more prominent in mature cutting. The influence of IBA treatment was also significant for rooting where 1000 was most effective for stimulating rooting juvenile cuttings and 2000 ppm in mature cuttings.

scholarly journals Regrowth of Mycobacterium tuberculosis Populations Exposed to Antibiotic Combinations Is Due to the Presence of Isoniazid and Not Bacterial Growth Rate

2019 ◽  
Vol 63 (12) ◽  
Author(s):  
Charlotte L. Hendon-Dunn ◽  
Henry Pertinez ◽  
Alice A. N. Marriott ◽  
Kim A. Hatch ◽  
Jon C. Allnutt ◽  
...  
Keyword(s):  
Growth Rate ◽  
Mycobacterium Tuberculosis ◽  
Time Course ◽  
Bacterial Population ◽  
Slow Growth ◽  
Bacterial Growth Rate ◽  
Content Type ◽  
Slow Growth Rate ◽  
Antibiotic Efficacy ◽  
Fast Growth Rate

ABSTRACT Modulation of the growth rate in Mycobacterium tuberculosis is key to its survival in the host, particularly with regard to its adaptation during chronic infection, when the growth rate is very slow. The resulting physiological changes influence the way in which this pathogen interacts with the host and responds to antibiotics. Therefore, it is important that we understand how the growth rate impacts antibiotic efficacy, particularly with respect to recovery/relapse. This is the first study that has asked how growth rates influence the mycobacterial responses to combinations of the frontline antimycobacterials, isoniazid (INH), rifampin (RIF), and pyrazinamide (PZA), using continuous cultures. The time course profiles of log-transformed total viable counts for cultures, controlled at either a fast growth rate (mean generation time [MGT], 23.1 h) or a slow growth rate (MGT, 69.3 h), were analyzed by the fitting of a mathematical model by nonlinear regression that accounted for the dilution rate in the chemostat and profiled the kill rates and recovery in culture. Using this approach, we show that populations growing more slowly were generally less susceptible to all treatments. We observed a faster kill rate associated with INH than with RIF or PZA and the appearance of regrowth. In line with this observation, regrowth was not observed with RIF exposure, which provided a slower bactericidal response. The sequential additions of RIF and PZA did not eliminate regrowth. We consider here that faster, early bactericidal activity is not what is required for the successful sterilization of M. tuberculosis, but instead, slower elimination of the bacilli followed by reduced recovery of the bacterial population is required.

Insulin, growth hormone, glucose, and fatty acids in gilts selected for rapid vs. slow growth rate

1989 ◽  
Vol 257 (4) ◽  
pp. E554-E560
Author(s):  
S. A. Norton ◽  
M. T. Zavy ◽  
C. V. Maxwell ◽  
D. S. Buchanan ◽  
J. E. Breazile
Keyword(s):  
Fatty Acids ◽  
Growth Hormone ◽  
Growth Rate ◽  
Slow Growth ◽  
Insulin Level ◽  
Growth Line ◽  
Slow Growth Rate ◽  
Selection For ◽  
Plasma Gh ◽  
Profile Area

Twelve-hour plasma profiles of growth hormone (GH), insulin, glucose, and nonesterified free fatty acids (NEFA), as well as GH, insulin, and glucose responses to saline, glucose, arginine, and human pancreatic growth hormone-releasing factor (GRF) infusion were examined in 15 crossbred gilts, selected for rapid vs. slow growth. For experiment 1 GH and insulin patterns differed (P less than 0.05) between the rapid growth line (RGL) and slow growth line (SGL). Mean GH concentrations in SGL and RGL gilts were 4.1 and 3.2 ng/ml, respectively (P less than 0.05). Plasma GH profile area was greater (P less than 0.08) for SGL than RGL gilts. Glucose level, glucose area, and insulin level were higher (P less than 0.05) for RGL than SGL gilts. Plasma NEFA levels and area were greater (P less than 0.05) for SGL gilts. In experiment 2 responses of GH, insulin, and glucose to saline, glucose, arginine, and GRF infusions varied (P less than 0.05) between and within lines relative to control values. These results indicate that selection for growth rate results in concomitant changes in endocrine and metabolic status.

Effectiveness of Selecting for Rapid and for Slow Growth Rate in Hampshire Swine

1946 ◽  
Vol 5 (1) ◽  
pp. 3-15 ◽  
Author(s):  
J. L. Krider ◽  
B. W. Fairbanks ◽  
W. E. Carroll ◽  
E. Roberts
Keyword(s):  
Growth Rate ◽  
Slow Growth ◽  
Slow Growth Rate

Fast Melting and Refining of Recycled Silicon Powders from the Wafer Back Grinding Process for Solar Cell Feedstock

2012 ◽  
Vol 706-709 ◽  
pp. 859-864 ◽  
Author(s):  
Kum Hee Seo ◽  
Bok Hyun Kang ◽  
Ki Young Kim
Keyword(s):  
Growth Rate ◽  
Directional Solidification ◽  
Silicon Oxide ◽  
Slow Growth ◽  
Graphite Crucible ◽  
Grinding Process ◽  
Slow Growth Rate ◽  
Complete Melting ◽  
To Come ◽  
Silicon Particles

A new way to melt and refine recycled silicon powders from the wafer back grinding wastes was proposed. We designed a new equipment using induction heating for the fast melting and directional solidification of the recycled silicon powders, and investigated the feasibility of utilizing them as silicon feedstock for solar cells through lab-scale experiments on the melting and refining them. Silicon particles recovered from back grinding slurry were flake like and very fine, about 3um and was covered with very thin silicon oxide. Slag was observed on the top of the melt during melting, which was composed of oxygen, silicon and carbon which was believed to come from the graphite crucible. Complete melting and subsequent feeding of powders into the melt were prevented by the slag formed during melting, which could be solved by changing the melting atmosphere. Slow growth rate made the impurities such as Al, Ti, Fe, Zr segregate to the top of the ingot purifying the lower part. Over 5N purity was obtained in the middle and lower part of the ingot by the fast melting and directional solidification.

Sign in / Sign up

Export Citation Format

Share Document