Feather Gene Expression Elucidates the Developmental Basis of Plumage Iridescence in African Starlings

2021 ◽  
Author(s):  
Dustin R Rubenstein ◽  
André Corvelo ◽  
Matthew D MacManes ◽  
Rafael Maia ◽  
Giuseppe Narzisi ◽  
...  

Abstract Iridescence is widespread in the living world, occurring in organisms as diverse as bacteria, plants, and animals. Yet, compared to pigment-based forms of coloration, we know surprisingly little about the developmental and molecular bases of the structural colors that give rise to iridescence. Birds display a rich diversity of iridescent structural colors that are produced in feathers by the arrangement of melanin-containing organelles called melanosomes into nanoscale configurations, but how these often unusually shaped melanosomes form, or how they are arranged into highly organized nanostructures, remains largely unknown. Here, we use functional genomics to explore the developmental basis of iridescent plumage using superb starlings (Lamprotornis superbus), which produce both iridescent blue and non-iridescent red feathers. Through morphological and chemical analyses, we confirm that hollow, flattened melanosomes in iridescent feathers are eumelanin-based, whereas melanosomes in non-iridescent feathers are solid and amorphous, suggesting that high pheomelanin content underlies red coloration. Intriguingly, the nanoscale arrangement of melanosomes within the barbules was surprisingly similar between feather types. After creating a new genome assembly, we use transcriptomics to show that non-iridescent feather development is associated with genes related to pigmentation, metabolism, and mitochondrial function, suggesting non-iridescent feathers are more energetically expensive to produce than iridescent feathers. However, iridescent feather development is associated with genes related to structural and cellular organization, suggesting that, while nanostructures themselves may passively assemble, barbules and melanosomes may require active organization to give them their shape. Together, our analyses suggest that iridescent feathers form through a combination of passive self-assembly and active processes.

2014 ◽  
Vol 205 (5) ◽  
pp. 613-619 ◽  
Author(s):  
Anthony K.L. Leung

Distinct properties of poly(ADP-ribose)—including its structural diversity, nucleation potential, and low complexity, polyvalent, highly charged nature—could contribute to organizing cellular architectures. Emergent data indicate that poly(ADP-ribose) aids in the formation of nonmembranous structures, such as DNA repair foci, spindle poles, and RNA granules. Informatics analyses reported here show that RNA granule proteins enriched for low complexity regions, which aid self-assembly, are preferentially modified by poly(ADP-ribose), indicating how poly(ADP-ribose) could direct cellular organization.


2013 ◽  
Vol 2013 ◽  
pp. 1-14 ◽  
Author(s):  
Binfu Bao ◽  
Duo Liu ◽  
Youyou Yang ◽  
Zhehong Shen ◽  
Bo You

Self-assembly of colloidal spheres is the most frequently used method for structural colors, but the chroma of the structural colors is usually so low that people cannot observe it under natural conditions. This paper presents a facile method for fabrications of vivid structural colors by doping carbon black into the self-assembly of colloidal polymer spheres and nanosilica particles. This approach can generate very gorgeous structural colors which can be very easily seen under natural conditions. The fabrication conditions for the self-assembly of composite dispersions of polymer/silica/carbon black were optimized to obtain colloidal crystals with vivid colors. Thus, robust mechanical properties, large-scale, and brilliant structural colors can guarantee the obtained crystal films to find practical applications, which are demonstrated by the fact that the successful applications of structural colors beautify the original simple and tedious surface of bamboo strand board (BSB).


ACS Nano ◽  
2015 ◽  
Vol 9 (5) ◽  
pp. 5454-5460 ◽  
Author(s):  
Ming Xiao ◽  
Yiwen Li ◽  
Michael C. Allen ◽  
Dimitri D. Deheyn ◽  
Xiujun Yue ◽  
...  

2014 ◽  
Vol 15 (10) ◽  
pp. 2118-2123 ◽  
Author(s):  
Guangqing Zhuang ◽  
Yun Zhang ◽  
Yanrong Jia ◽  
Dongming Qi ◽  
Qinguo Fan ◽  
...  

2021 ◽  
Vol 118 (23) ◽  
pp. e2101357118
Author(s):  
Vinodkumar Saranathan ◽  
Suresh Narayanan ◽  
Alec Sandy ◽  
Eric R. Dufresne ◽  
Richard O. Prum

Vivid, saturated structural colors are conspicuous and important features of many animals. A rich diversity of three-dimensional periodic photonic nanostructures is found in the chitinaceous exoskeletons of invertebrates. Three-dimensional photonic nanostructures have been described in bird feathers, but they are typically quasi-ordered. Here, we report bicontinuous single gyroid β-keratin and air photonic crystal networks in the feather barbs of blue-winged leafbirds (Chloropsis cochinchinensis sensu lato), which have evolved from ancestral quasi-ordered channel-type nanostructures. Self-assembled avian photonic crystals may serve as inspiration for multifunctional applications, as they suggest efficient, alternative routes to single gyroid synthesis at optical length scales, which has been experimentally elusive.


2021 ◽  
Author(s):  
Huan Liu ◽  
Bo Pang ◽  
Kai Zhang

Abstract The self-assembly of cellulose nanowhiskers (CNWs) in confined geometries provides a powerful method for the fabrication of novel structures. Herein, ordered honeycomb microporous films were first prepared with surface-acylated CNWs (CNWs-SU) through the breath figure method. Resulting films showed highly porous order over large regions and the iridescent color was only displayed by their rims, which is different from traditional dish-cast CNW films showing the iridescent color over the whole area. This is mainly due to the condensation of water droplets forming three-dimensional (3D) geometry, which forced CNWs-SU to self-assemble into cholesteric architectures in confined geometry and resulted in the iridescent color of the rims after drying. The mechanism was further studied by investigating the critical influencing factors, primarily the concentration of CNW-SU suspensions, the relative humidity of the atmosphere and the surface-attached moieties. In particular, CNW-SU suspensions with a concentration of 3 mg/mL at the relative humidity of 75% preferentially formed honeycomb films with uniform pores. Too low or too high concentrations of CNW-SU suspensions or relative humidity are not preferable for uniform porous films. CNWs-SU with further immobilized octadecane or fluoroalkyl groups on their surface strongly affected the formation of uniform porous films because of higher hydrophobicity and accompanying inhomogeneous condensation of water droplets. This work provides a novel method to study the interactions of CNWs beyond the planar geometry and the formation of uniform porous films solely with CNWs with structural colors for diverse potential applications.


Cellulose ◽  
2021 ◽  
Author(s):  
Huan Liu ◽  
Bo Pang ◽  
Kai Zhang

AbstractThe self-assembly of cellulose nanowhiskers (CNWs) in confined geometries provides a powerful method for the fabrication of novel structures. Herein, ordered honeycomb microporous films were first prepared with surface-acylated CNWs (CNWs-SU) through the breath figure method. Resulting films showed highly porous order over large regions and the iridescent color was only displayed by their rims, which is different from traditional dish-cast CNW films showing the iridescent color over the whole area. This is mainly due to the condensation of water droplets forming three-dimensional (3D) geometry, which forced CNWs-SU to self-assemble into cholesteric architectures in confined geometry and resulted in the iridescent color of the rims after drying. The mechanism was further studied by investigating the critical influencing factors, primarily the concentration of CNW-SU suspensions, the relative humidity of the atmosphere and the surface-attached moieties. In particular, CNW-SU suspensions with a concentration of 3 mg/mL at the relative humidity of 75% preferentially formed honeycomb films with uniform pores. Too low or too high concentrations of CNW-SU suspensions or relative humidity are not preferable for uniform porous films. CNWs-SU with further immobilized octadecane or fluoroalkyl groups on their surface strongly affected the formation of uniform porous films because of higher hydrophobicity and accompanying inhomogeneous condensation of water droplets. This work provides a novel method to study the interactions of CNWs beyond the planar geometry and the formation of uniform porous films solely with CNWs with structural colors open up interesting possibilities for broad application in photonic nanomaterials. Graphic abstract


2019 ◽  
Vol 7 (38) ◽  
pp. 11776-11782 ◽  
Author(s):  
Dongpeng Yang ◽  
Guolong Liao ◽  
Shaoming Huang

Invisible photonic prints that become visible by UV light irradiation were prepared via the self-assembly of Y2O3:Eu colloidal particles into amorphous photonic crystals (APCs) with controlled fluorescent and noniridescent structural colors.


1999 ◽  
Vol 77 (5) ◽  
pp. 706-720 ◽  
Author(s):  
Iris Meusel ◽  
Christoph Neinhuis ◽  
Claus Markstädter ◽  
Wilhelm Barthlott

Transversely ridged rodlets (Aristolochia-type) are of high systematic significance characterizing the ancestral Aristolochiales, Magnoliales, and Laurales. Sporadically, they also occur in various unrelated derived taxa. The ultrastructure, chemistry, and recrystallization of epicuticular waxes of nine species were investigated by high resolution scanning electron microscopy, gas chromatography, and mass spectrometry. Chemical analyses show that transversely ridged rodlets clearly differ in their composition. Waxes of one group are characterized by ketones, whereas a second group completely lacks ketones and is dominated by alkanes. Hentriacontan-16-one (palmitone) was found to be characteristic for transversely ridged rodlets of Aristolochia, Laurus, and Paeonia. Standard solutions were taken for recrystallization experiments under different conditions of solvent, crystallization velocity, and temperature. It was shown that transversely ridged rodlets or related crystals grow from total waxes of all species but never crystallize from individual compounds such as alkanes or palmitone. We concluded that transversely ridged crystals are formed by self-assembly based on a slow crystallization process and the presence of additives. This paper shows that transversely ridged rodlets occur convergently within angiosperms based on a similar mode of crystallization but a different chemical composition. The role of palmitone as a chemotaxonomic character of ancestral angiosperms is discussed.Key words: plant cuticle, epicuticular waxes, chemistry, ultrastructure, recrystallization, systematics.


Sign in / Sign up

Export Citation Format

Share Document