scholarly journals Pre-selection of the candidate fields for deep imaging of the epoch of reionization with SKA1-low

2020 ◽  
Vol 499 (3) ◽  
pp. 3434-3444
Author(s):  
Qian Zheng ◽  
Xiang-Ping Wu ◽  
Quan Guo ◽  
Melanie Johnston-Hollitt ◽  
Huanyuan Shan ◽  
...  
Keyword(s):  
Surface Brightness ◽  
Low Frequency ◽  
Far Field ◽  
Frequency Range ◽  
High Quality ◽  
Average Surface ◽  
Square Kilometre Array ◽  
Broad Frequency Range ◽  
Deep Imaging ◽  
Selection Of

ABSTRACT The Square Kilometre Array (SKA) will be the first low-frequency instrument with the capability to directly image the structures of the epoch of reionization (EoR). Indeed, deep imaging of the EoR over five targeted fields of 20 sq deg each has been selected as the highest priority science objective for SKA1. Aiming at preparing for this highly challenging observation, we perform an extensive pre-selection of the ‘quietest’ and ‘cleanest’ candidate fields in the southern sky to be suited for deep imaging of the EoR using existing catalogues and observations over a broad frequency range. The candidate fields should meet a number of strict criteria to avoid contaminations from foreground structures and sources. The candidate fields should also exhibit both the lowest average surface brightness and smallest variance to ensure uniformity and high-quality deep imaging over the fields. Our selection eventually yields a sample of 7 ‘ideal’ fields of 20 sq deg in the southern sky that could be targeted for deep imaging of the EoR. Finally, these selected fields are convolved with the synthesized beam of SKA1-low stations to ensure that the effect of sidelobes from the far-field bright sources is also weak.

Low-frequency impact sound of timber floors: A finite element–based study of conceptual designs

2020 ◽  
pp. 1351010X2091787
Author(s):  
Jörgen Olsson ◽  
Andreas Linderholt
Keyword(s):  
Finite Element ◽  
Low Frequency ◽  
Sound Transmission ◽  
Human Perception ◽  
Finite Element Simulations ◽  
Building Industry ◽  
Frequency Range ◽  
Floor Surfaces ◽  
The Impact ◽  
Selection Of

Traditionally, product development concerning acoustics in the building industry is measurement oriented. For lightweight floors, frequencies that are lower than the frequency range for heavy concrete floors are an issue. The frequency range of from 50 Hz down to 20 Hz influences the human perception of impact sound in multi-story apartment buildings with lightweight floor constructions, such as timber floors, for example. It is well known that a lower frequency range of interest makes finite element simulations more feasible. Strategies for reducing impact sound tend to be less straightforward for timber floors because they have a larger variation of designs when compared to concrete floors. This implies that reliable finite element simulations of impact sound can save time and money for the building industry. This study researches the impact sound transmission of lightweight timber floors. Frequency response functions, from forces on excitation points to sound pressure in the receiving cavity below, are calculated. By using fluid elements connected to reflection-free boundary elements under the floors in the models, the transmission and insulation can be studied without involving reverberation. A floor model with a hard screed surface will have a larger impact force than a softer floor, although this issue seems less pronounced at the lowest frequencies. To characterize floor surfaces, the point mobilities of the impact points are also calculated and presented. The vibration and sound transmission levels are dependent on the selection of the excitation points.

Active attenuation of sound transmission through a soft-core sandwich panel into an acoustic enclosure using volume velocity cancellation

2015 ◽  
Vol 229 (17) ◽  
pp. 3096-3112 ◽  
Author(s):  
Kiran Chandra Sahu ◽  
Jukka Tuhkuri ◽  
JN Reddy
Keyword(s):  
Active Control ◽  
Sandwich Panel ◽  
Control Method ◽  
Low Frequency ◽  
Sound Transmission ◽  
Soft Core ◽  
Frequency Range ◽  
Broad Frequency Range ◽  
Volume Velocity ◽  
Numerical Studies

In this paper, active control of harmonic sound transmitted through a soft-core sandwich panel into a rectangular enclosure is studied. As it has already been shown for the low frequency region, the noise transmission through a soft-core sandwich panel mainly occurs due to the flexural and the dilatational modes. Therefore, in this study, volume velocity cancellation control strategy is used to control these modes, and achieve sound attenuation in a broad frequency range. Point force and uniformly distributed force actuators are used as the secondary actuator to cancel the volume velocity of the bottom faceplate, which opens to the cavity, of the sandwich panel. Cancelling the net volume velocity of the bottom faceplate is compared not only in terms of the reduction in sound transmission through the sandwich panel into cavity but also in terms of the faceplate velocities. Also, the effectiveness of the volume velocity cancellation strategy has been studied for different values of isotropic loss factor of the core. Sound transmission into the cavity has also been calculated by considering the effect of cavity pressure on the sandwich panel. Numerical studies indicate that the active control method controls both the flexural and the dilatational modes of the sandwich panel and therefore, attenuates significant amount of sound pressure inside the cavity irrespective of the isotropic loss factors of the viscoelastic core in a broad frequency range. Also a finite element study has been done in the commercially available COMSOL Multiphysics software to compare with the analytical results.

scholarly journals Robust Acoustic Imaging Based on Bregman Iteration and Fast Iterative Shrinkage-Thresholding Algorithm

Sensors ◽  
2020 ◽  
Vol 20 (24) ◽  
pp. 7298
Author(s):  
Linsen Huang ◽  
Shaoyu Song ◽  
Zhongming Xu ◽  
Zhifei Zhang ◽  
Yansong He
Keyword(s):  
Large Scale ◽  
Near Field ◽  
Low Frequency ◽  
Acoustic Imaging ◽  
Far Field ◽  
Frequency Range ◽  
Bregman Iteration ◽  
Iterative Shrinkage ◽  
Thresholding Algorithm ◽  
Iterative Shrinkage Thresholding

The acoustic imaging (AI) technique could map the position and the strength of the sound source via the signal processing of the microphone array. Conventional methods, including far-field beamforming (BF) and near-field acoustic holography (NAH), are limited to the frequency range of measured objects. A method called Bregman iteration based acoustic imaging (BI-AI) is proposed to enhance the performance of the two-dimensional acoustic imaging in the far-field and near-field measurements. For the large-scale ℓ1 norm problem, Bregman iteration (BI) acquires the sparse solution; the fast iterative shrinkage-thresholding algorithm (FISTA) solves each sub-problem. The interpolating wavelet method extracts the information about sources and refines the computational grid to underpin BI-AI in the low-frequency range. The capabilities of the proposed method were validated by the comparison between some tried-and-tested methods processing simulated and experimental data. The results showed that BI-AI separates the coherent sources well in the low-frequency range compared with wideband acoustical holography (WBH); BI-AI estimates better strength and reduces the width of main lobe compared with ℓ1 generalized inverse beamforming (ℓ1-GIB).

scholarly journals Distances and Radii of Classical Cepheids

1985 ◽  
Vol 82 ◽  
pp. 53-55 ◽  
Author(s):  
T. G. Barnes ◽  
T. J. Moffett
Keyword(s):  
Surface Brightness ◽  
Linear Displacement ◽  
Radial Velocities ◽  
Angular Diameter ◽  
Displacement Curve ◽  
High Quality ◽  
Diameter Variation ◽  
Classical Cepheids ◽  
Selection Of

We have used new BVRI photometry and radial velocities of a selection of bright classical Cepheids to determine their distances and radii through the surface brightness method. The improved photometry permitted, through the visual surface brightness relation, high-quality angular-diameter values for each Cepheid throughout its pulsation. The simultaneous radial velocities permitted the linear displacement curve to be phase-locked to the angular diameter variation. The results are individual distances and radii with considerably smaller uncertainty than could be obtained previously.

scholarly journals New results from LOFAR

2012 ◽  
Vol 8 (S291) ◽  
pp. 47-52
Author(s):  
Vladislav Kondratiev
Keyword(s):  
The Netherlands ◽  
Radio Telescope ◽  
Low Frequency ◽  
Next Generation ◽  
Frequency Range ◽  
High Quality ◽  
Pulsar Emission ◽  
Science Projects ◽  
Rapid Changes ◽  
Future Science

AbstractThe LOw Frequency Array, LOFAR, is a next generation radio telescope with its core in the Netherlands and elements distributed throughout Europe. It has exceptional collecting area and wide bandwidths at frequencies from 10 MHz up to 250 MHz. It is in exactly this frequency range where pulsars are brightest and also where they exhibit rapid changes in their emission profiles. Although LOFAR is still in the commissioning phase it is already collecting data of high quality. I will present highlights from our commissioning observations which will include: unique constraints on the site of pulsar emission, individual pulse studies, observations of millisecond pulsars, using pulsars to constrain the properties of the magneto-ionic medium and pilot pulsars surveys. I will also discuss future science projects and advances in the observing capabilities.

Evaluation of Special Hearing Aids for Deaf Children

1971 ◽  
Vol 36 (4) ◽  
pp. 527-537 ◽  
Author(s):  
Norman P. Erber
Keyword(s):  
Hearing Aids ◽  
High Frequency ◽  
Hearing Aid ◽  
Low Frequency ◽  
Acoustic Stimulation ◽  
Deaf Children ◽  
Frequency Range ◽  
Frequency Limit ◽  
Unpublished Studies ◽  
Published Research

Two types of special hearing aid have been developed recently to improve the reception of speech by profoundly deaf children. In a different way, each special system provides greater low-frequency acoustic stimulation to deaf ears than does a conventional hearing aid. One of the devices extends the low-frequency limit of amplification; the other shifts high-frequency energy to a lower frequency range. In general, previous evaluations of these special hearing aids have obtained inconsistent or inconclusive results. This paper reviews most of the published research on the use of special hearing aids by deaf children, summarizes several unpublished studies, and suggests a set of guidelines for future evaluations of special and conventional amplification systems.

Dynamic Damping and Stiffness Characteristics of the Rolling Tire

2001 ◽  
Vol 29 (4) ◽  
pp. 258-268 ◽  
Author(s):  
G. Jianmin ◽  
R. Gall ◽  
W. Zuomin
Keyword(s):  
Dynamic Behavior ◽  
Variable Parameter ◽  
Low Frequency ◽  
Vertical Load ◽  
Frequency Range ◽  
Inflation Pressure ◽  
Vehicle Simulation ◽  
Dynamic Damping ◽  
Speed Range ◽  
Stiffness Characteristics

Abstract A variable parameter model to study dynamic tire responses is presented. A modified device to measure terrain roughness is used to measure dynamic damping and stiffness characteristics of rolling tires. The device was used to examine the dynamic behavior of a tire in the speed range from 0 to 10 km/h. The inflation pressure during the tests was adjusted to 160, 240, and 320 kPa. The vertical load was 5.2 kN. The results indicate that the damping and stiffness decrease with velocity. Regression formulas for the non-linear experimental damping and stiffness are obtained. These results can be used as input parameters for vehicle simulation to evaluate the vehicle's driving and comfort performance in the medium-low frequency range (0–100 Hz). This way it can be important for tire design and the forecasting of the dynamic behavior of tires.

Sign in / Sign up

Export Citation Format

Share Document