scholarly journals Direct sequencing of RNA with MinION Nanopore: detecting mutations based on associations

2019 ◽  
Author(s):  
Noam Harel ◽  
Moran Meir ◽  
Uri Gophna ◽  
Adi Stern
Keyword(s):  
Direct Sequencing ◽  
Error Rates ◽  
Next Generation Sequencing Data ◽  
Random Pattern ◽  
Sequencing Data ◽  
Sequencing Errors ◽  
Long Reads ◽  
Oxford Nanopore ◽  
Long Read ◽  
Different Strains

Abstract One of the key challenges in the field of genetics is the inference of haplotypes from next generation sequencing data. The MinION Oxford Nanopore sequencer allows sequencing long reads, with the potential of sequencing complete genes, and even complete genomes of viruses, in individual reads. However, MinION suffers from high error rates, rendering the detection of true variants difficult. Here, we propose a new statistical approach named AssociVar, which differentiates between true mutations and sequencing errors from direct RNA/DNA sequencing using MinION. Our strategy relies on the assumption that sequencing errors will be dispersed randomly along sequencing reads, and hence will not be associated with each other, whereas real mutations will display a non-random pattern of association with other mutations. We demonstrate our approach using direct RNA sequencing data from evolved populations of the MS2 bacteriophage, whose small genome makes it ideal for MinION sequencing. AssociVar inferred several mutations in the phage genome, which were corroborated using parallel Illumina sequencing. This allowed us to reconstruct full genome viral haplotypes constituting different strains that were present in the sample. Our approach is applicable to long read sequencing data from any organism for accurate detection of bona fide mutations and inter-strain polymorphisms.

scholarly journals Direct Sequencing of RNA with MinION Nanopore: Detecting Mutations based on Associations

2019 ◽  
Author(s):  
Noam Harel ◽  
Moran Meir ◽  
Uri Gophna ◽  
Adi Stern
Keyword(s):  
Direct Sequencing ◽  
Error Rates ◽  
Next Generation Sequencing Data ◽  
Random Pattern ◽  
Sequencing Data ◽  
Sequencing Errors ◽  
Long Reads ◽  
Oxford Nanopore ◽  
Long Read ◽  
Different Strains

One of the key challenges in the field of genetics is the inference of haplotypes from next generation sequencing data. The MinION Oxford Nanopore sequencer allows sequencing long reads, with the potential of sequencing complete genes, and even complete genomes of viruses, in individual reads. However, MinION suffers from high error rates, rendering the detection of true variants difficult. Here we propose a new statistical approach named AssociVar, which differentiates between true mutations and sequencing errors from direct RNA/DNA sequencing using MinION. Our strategy relies on the assumption that sequencing errors will be dispersed randomly along sequencing reads, and hence will not be associated with each other, whereas real mutations will display a non-random pattern of association with other mutations. We demonstrate our approach using direct RNA sequencing data from evolved populations of the MS2 bacteriophage, whose small genome makes it ideal for MinION sequencing. AssociVar inferred several mutations in the phage genome, which were corroborated using parallel Illumina sequencing. This allowed us to reconstruct full genome viral haplotypes constituting different strains that were present in the sample. Our approach is applicable to long read sequencing data from any organism for accurate detection of bona fide mutations and inter-strain polymorphisms.

scholarly journals Improved assembly of noisy long reads by k-mer validation

2016 ◽  
Author(s):  
A. Bernardo Carvalho ◽  
Eduardo G Dupim ◽  
Gabriel Nassar
Keyword(s):  
Low Cost ◽  
Error Rates ◽  
Read Length ◽  
Celera Assembler ◽  
Short Reads ◽  
Sequencing Errors ◽  
Long Reads ◽  
Oxford Nanopore ◽  
Long Read ◽  
Validation Procedure

Genome assembly depends critically on read length. Two recent technologies, PacBio and Oxford Nanopore, produce read lengths above 20 kb, which yield genome assemblies that are vastly superior to those based on Sanger or short-reads. However, the very high error rates of both technologies (around 15%-20%) makes assembly computationally expensive and imprecise at repeats longer than the read length. Here we show that the efficiency and quality of the assembly of these noisy reads can be significantly improved at a minimal cost, by leveraging on the low error rate and low cost of Illumina short reads. Namely, k-mers from the PacBio raw reads that are not present in the Illumina reads (which account for ~95% of the distinct k-mers) are deemed as sequencing errors and ignored at the seed alignment step. By focusing on ~5% of the k-mers which are error-free, read overlap sensitivity is dramatically increased. Equally important, the validation procedure can be extended to exclude repetitive k-mers, which avoids read miscorrection at repeats and further improve the resulting assemblies. We tested the k-mer validation procedure in one long-read technology (PacBio) and one assembler (MHAP/ Celera Assembler), but is likely to yield analogous improvements with alternative long-read technologies and overlappers, such as Oxford Nanopore and BLASR/DAligner.

scholarly journals Hapo-G, haplotype-aware polishing of genome assemblies with accurate reads

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Jean-Marc Aury ◽  
Benjamin Istace
Keyword(s):  
Single Molecule ◽  
Direct Consequence ◽  
High Quality ◽  
Sequencing Errors ◽  
Coding Regions ◽  
Sequencing Technologies ◽  
Long Reads ◽  
Oxford Nanopore ◽  
Long Read ◽  
Genome Assemblies

Abstract Single-molecule sequencing technologies have recently been commercialized by Pacific Biosciences and Oxford Nanopore with the promise of sequencing long DNA fragments (kilobases to megabases order) and then, using efficient algorithms, provide high quality assemblies in terms of contiguity and completeness of repetitive regions. However, the error rate of long-read technologies is higher than that of short-read technologies. This has a direct consequence on the base quality of genome assemblies, particularly in coding regions where sequencing errors can disrupt the coding frame of genes. In the case of diploid genomes, the consensus of a given gene can be a mixture between the two haplotypes and can lead to premature stop codons. Several methods have been developed to polish genome assemblies using short reads and generally, they inspect the nucleotide one by one, and provide a correction for each nucleotide of the input assembly. As a result, these algorithms are not able to properly process diploid genomes and they typically switch from one haplotype to another. Herein we proposed Hapo-G (Haplotype-Aware Polishing Of Genomes), a new algorithm capable of incorporating phasing information from high-quality reads (short or long-reads) to polish genome assemblies and in particular assemblies of diploid and heterozygous genomes.

scholarly journals Evaluation of Germline Structural Variant Calling Methods for Nanopore Sequencing Data

2021 ◽  
Vol 12 ◽  
Author(s):  
Davide Bolognini ◽  
Alberto Magi
Keyword(s):  
Variant Calling ◽  
Research Report ◽  
Nanopore Sequencing ◽  
Sequencing Data ◽  
Factors Affecting ◽  
Sequencing Technologies ◽  
Long Reads ◽  
Oxford Nanopore ◽  
Sequencing Studies ◽  
Long Read

Structural variants (SVs) are genomic rearrangements that involve at least 50 nucleotides and are known to have a serious impact on human health. While prior short-read sequencing technologies have often proved inadequate for a comprehensive assessment of structural variation, more recent long reads from Oxford Nanopore Technologies have already been proven invaluable for the discovery of large SVs and hold the potential to facilitate the resolution of the full SV spectrum. With many long-read sequencing studies to follow, it is crucial to assess factors affecting current SV calling pipelines for nanopore sequencing data. In this brief research report, we evaluate and compare the performances of five long-read SV callers across four long-read aligners using both real and synthetic nanopore datasets. In particular, we focus on the effects of read alignment, sequencing coverage, and variant allele depth on the detection and genotyping of SVs of different types and size ranges and provide insights into precision and recall of SV callsets generated by integrating the various long-read aligners and SV callers. The computational pipeline we propose is publicly available at https://github.com/davidebolo1993/EViNCe and can be adjusted to further evaluate future nanopore sequencing datasets.

scholarly journals LINKS: Scaffolding genome assemblies with kilobase-long nanopore reads

2015 ◽  
Author(s):  
Rene L Warren ◽  
Benjamin P Vandervalk ◽  
Steven JM Jones ◽  
Inanc Birol
Keyword(s):  
Genome Assembly ◽  
Error Rates ◽  
Great Promise ◽  
Genomic Information ◽  
E Coli ◽  
Long Reads ◽  
Oxford Nanopore ◽  
Long Read ◽  
K 12 ◽  
Genome Assemblies

Owing to the complexity of the assembly problem, we do not yet have complete genome sequences. The difficulty in assembling reads into finished genomes is exacerbated by sequence repeats and the inability of short reads to capture sufficient genomic information to resolve those problematic regions. Established and emerging long read technologies show great promise in this regard, but their current associated higher error rates typically require computational base correction and/or additional bioinformatics pre-processing before they could be of value. We present LINKS, the Long Interval Nucleotide K-mer Scaffolder algorithm, a solution that makes use of the information in error-rich long reads, without the need for read alignment or base correction. We show how the contiguity of an ABySS E. coli K-12 genome assembly could be increased over five-fold by the use of beta-released Oxford Nanopore Ltd. (ONT) long reads and how LINKS leverages long-range information in S. cerevisiae W303 ONT reads to yield an assembly with less than half the errors of competing applications. Re-scaffolding the colossal white spruce assembly draft (PG29, 20 Gbp) and how LINKS scales to larger genomes is also presented. We expect LINKS to have broad utility in harnessing the potential of long reads in connecting high-quality sequences of small and large genome assembly drafts. Availability: http://www.bcgsc.ca/bioinfo/software/links

scholarly journals Comparative assessment of long-read error correction software applied to Nanopore RNA-sequencing data

2019 ◽  
Vol 21 (4) ◽  
pp. 1164-1181 ◽  
Author(s):  
Leandro Lima ◽  
Camille Marchet ◽  
Ségolène Caboche ◽  
Corinne Da Silva ◽  
Benjamin Istace ◽  
...  
Keyword(s):  
Error Correction ◽  
Rna Sequencing ◽  
Gene Families ◽  
Error Rates ◽  
Open Reading Frames ◽  
Sequencing Data ◽  
Isoform Diversity ◽  
Long Reads ◽  
Long Read ◽  
Read Error Correction

Abstract Motivation Nanopore long-read sequencing technology offers promising alternatives to high-throughput short read sequencing, especially in the context of RNA-sequencing. However this technology is currently hindered by high error rates in the output data that affect analyses such as the identification of isoforms, exon boundaries, open reading frames and creation of gene catalogues. Due to the novelty of such data, computational methods are still actively being developed and options for the error correction of Nanopore RNA-sequencing long reads remain limited. Results In this article, we evaluate the extent to which existing long-read DNA error correction methods are capable of correcting cDNA Nanopore reads. We provide an automatic and extensive benchmark tool that not only reports classical error correction metrics but also the effect of correction on gene families, isoform diversity, bias toward the major isoform and splice site detection. We find that long read error correction tools that were originally developed for DNA are also suitable for the correction of Nanopore RNA-sequencing data, especially in terms of increasing base pair accuracy. Yet investigators should be warned that the correction process perturbs gene family sizes and isoform diversity. This work provides guidelines on which (or whether) error correction tools should be used, depending on the application type. Benchmarking software https://gitlab.com/leoisl/LR_EC_analyser

scholarly journals De novo clustering of long-read transcriptome data using a greedy, quality-value based algorithm

2018 ◽  
Author(s):  
Kristoffer Sahlin ◽  
Paul Medvedev
Keyword(s):  
Clustering Algorithm ◽  
De Novo ◽  
Substantial Improvement ◽  
Error Rates ◽  
Reconstruction Algorithms ◽  
Long Reads ◽  
Oxford Nanopore ◽  
Long Read ◽  
Transcript Reconstruction ◽  
Oxford Nanopore Technologies

AbstractLong-read sequencing of transcripts with PacBio Iso-Seq and Oxford Nanopore Technologies has proven to be central to the study of complex isoform landscapes in many organisms. However, current de novo transcript reconstruction algorithms from long-read data are limited, leaving the potential of these technologies unfulfilled. A common bottleneck is the dearth of scalable and accurate algorithms for clustering long reads according to their gene family of origin. To address this challenge, we develop isONclust, a clustering algorithm that is greedy (in order to scale) and makes use of quality values (in order to handle variable error rates). We test isONclust on three simulated and five biological datasets, across a breadth of organisms, technologies, and read depths. Our results demonstrate that isONclust is a substantial improvement over previous approaches, both in terms of overall accuracy and/or scalability to large datasets. Our tool is available at https://github.com/ksahlin/isONclust.

scholarly journals SVJedi: Genotyping structural variations with long reads

2019 ◽  
Author(s):  
Lolita Lecompte ◽  
Pierre Peterlongo ◽  
Dominique Lavenier ◽  
Claire Lemaitre
Keyword(s):  
Sequencing Data ◽  
Structural Variations ◽  
Short Read ◽  
Sequencing Technologies ◽  
Long Reads ◽  
Oxford Nanopore ◽  
Clinical Diagnoses ◽  
Long Read ◽  
Reference Sequences ◽  
The One

AbstractMotivationStudies on structural variants (SV) are expanding rapidly. As a result, and thanks to third generation sequencing technologies, the number of discovered SVs is increasing, especially in the human genome. At the same time, for several applications such as clinical diagnoses, it is important to genotype newly sequenced individuals on well defined and characterized SVs. Whereas several SV genotypers have been developed for short read data, there is a lack of such dedicated tool to assess whether known SVs are present or not in a new long read sequenced sample, such as the one produced by Pacific Biosciences or Oxford Nanopore Technologies.ResultsWe present a novel method to genotype known SVs from long read sequencing data. The method is based on the generation of a set of reference sequences that represent the two alleles of each structural variant. Long reads are aligned to these reference sequences. Alignments are then analyzed and filtered out to keep only informative ones, to quantify and estimate the presence of each SV allele and the allele frequencies. We provide an implementation of the method, SVJedi, to genotype insertions and deletions with long reads. The tool has been applied to both simulated and real human datasets and achieves high genotyping accuracy. We also demonstrate that SV genotyping is considerably improved with SVJedi compared to other approaches, namely SV discovery and short read SV genotyping approaches.Availabilityhttps://github.com/llecompte/[email protected]

scholarly journals Clustering de Novo by Gene of Long Reads from Transcriptomics Data

2017 ◽  
Author(s):  
Camille Marchet ◽  
Lolita Lecompte ◽  
Corinne Da Silva ◽  
Corinne Cruaud ◽  
Jean-Marc Aury ◽  
...  
Keyword(s):  
De Novo ◽  
Free Access ◽  
Sequencing Data ◽  
Base Pairs ◽  
Long Reads ◽  
Oxford Nanopore ◽  
Processing Step ◽  
Whole Transcriptome Sequencing ◽  
Long Read ◽  
Transcriptomics Data

AbstractLong-read sequencing currently provides sequences of several thousand base pairs. This allows to obtain complete transcripts, which offers an un-precedented vision of the cellular transcriptome.However the literature is lacking tools to cluster such data de novo, in particular for Oxford Nanopore Technologies reads, because of the inherent high error rate compared to short reads.Our goal is to process reads from whole transcriptome sequencing data accurately and without a reference genome in order to reliably group reads coming from the same gene. This de novo approach is therefore particularly suitable for non-model species, but can also serve as a useful pre-processing step to improve read mapping. Our contribution is both to propose a new algorithm adapted to clustering of reads by gene and a practical and free access tool that permits to scale the complete processing of eukaryotic transcriptomes.We sequenced a mouse RNA sample using the MinION device, this dataset is used to compare our solution to other algorithms used in the context of biological clustering. We demonstrate its is better-suited for transcriptomics long reads. When a reference is available thus mapping possible, we show that it stands as an alternative method that predicts complementary clusters.

scholarly journals Rapid multi-locus sequence typing direct from uncorrected long reads using Krocus

2018 ◽  
Author(s):  
Andrew J. Page ◽  
Jacqueline A. Keane
Keyword(s):  
Error Rates ◽  
Multi Locus Sequence Typing ◽  
Short Read Sequencing ◽  
Sequencing Technologies ◽  
Long Reads ◽  
Oxford Nanopore ◽  
Standard Tool ◽  
Long Read ◽  
Sequence Types ◽  
Very High

AbstractGenome sequencing is rapidly being adopted in reference labs and hospitals for bacterial outbreak investigation and diagnostics where time is critical. Seven gene multi-locus sequence typing is a standard tool for broadly classifying samples into sequence types, allowing, in many cases, to rule a sample in or out of an outbreak, or allowing for general characteristics about a bacterial strain to be inferred. Long read sequencing technologies, such as from PacBio or Oxford Nanopore, can produce read data within minutes of an experiment starting, unlike short read sequencing technologies which require many hours/days. However, the error rates of raw uncorrected long read data are very high. We present Krocus which can predict a sequence type directly from uncorrected long reads, and which was designed to consume read data as it is produced, providing results in minutes. It is the only tool which can do this from uncorrected long reads. We tested Krocus on over 600 samples sequenced with using long read sequencing technologies from PacBio and Oxford Nanopore. It provides sequence types on average within 90 seconds, with a sensitivity of 94% and specificity of 97%, directly from uncorrected raw sequence reads. The software is written in Python and is available under the open source license GNU GPL version 3.

Sign in / Sign up

Export Citation Format

Share Document