Logging Damage Using an Individual-Tree Selection Practice in Appalachian Hardwood Stands

1985 ◽  
Vol 2 (4) ◽  
pp. 117-120 ◽  
Author(s):  
Neil I. Lamson ◽  
H. Clay Smith ◽  
Gary W. Miller

Abstract Four West Virginia hardwood stands, managed using individual-tree selection for the past 30 years, were examined after the third and, in one instance, the fourth periodic harvest to determine the severity of logging damage. On existing skid roads, trees were removed with a rubber-tired skidder or a crawler tractor with a rubber-tired arch. Logging damage reduced residual stand basal area by 6%, a total of 6.1 ft² per acre. Damage was concentrated in the saplings—85% of the stems lost to logging damage were less than 5.0 in dbh. An adequate number of undamaged stems in all diameter classes remained after logging to achieve individual-tree selection stand structure goals. North. J. Appl. For. 2:117-120, Dec. 1985.

1989 ◽  
Vol 13 (2) ◽  
pp. 76-80 ◽  
Author(s):  
Robert L. Bailey ◽  
Thomas M. Burgan ◽  
Eric J. Jokela

Abstract Data from 263 plots in a regional fertilization study of midrotation-aged slash pine plantations were used to fit prediction equations for basal area, trees per acre, stand average dominant height, diameter distributions, and individual tree heights. The equations include N and P fertilizationrates and CRIFF soil groups as predictor variables. The survival model also accounts for the accelerating effect of fusiform rust on mortality rate. Using published tree volume equations, the prediction of volumes by dbh class for fertilized slash pine plantations is now possible. This integratedsystem of equations is available as a user-friendly computer program that can calculate expected yields by diameter class and aid the forester in evaluating investment opportunities that include forest fertilization. South. J. Appl. For. 13(2):76-80.


2004 ◽  
Vol 80 (4) ◽  
pp. 495-506 ◽  
Author(s):  
V. Lacerte ◽  
G R Larocque ◽  
M. Woods ◽  
W J Parton ◽  
M. Penner

The Lake States variant of the FVS (Forest Vegetation Simulator) model (LS-FVS), also known as the LS-TWIGS variant of FVS, was validated for black spruce (Picea mariana (Mill.) BSP), white spruce (Picea glauca (Moench) Voss), jack pine (Pinus banksiana Lamb.) and trembling aspen (Populus tremuloides Michx.) forests in northern Ontario. Individual-tree data from 537 remeasured sample plots were used. This dataset included different combinations of site index, stand density and age. It was possible to compare observations and predictions for different projection length periods. The validation exercise included a biological consistency analysis, the computation of mean percent difference (MPD) for stand density, stand basal area, top height and quadratic mean diameter (QMD) and the comparison of observed and predicted individual-tree dbh. The biological consistency analysis indicated that LS-FVS logically predicted the effect of site index on top height, stand basal area and QMD for black spruce and jack pine. However, the decrease in stand basal area at young ages was inconsistent with the normal development pattern of the forest stands under study and was attributed to deficiencies in the prediction of mortality. LS-FVS was found to underpredict stand density, stand basal area and top height and to over-predict QMD. Even though there were large errors in the prediction of change in stand density, LS-FVS was nevertheless consistent in the prediction of the shape of the dbh size distribution. Key words: FVS, Forest Vegetation Simulator, validation, biological consistency analysis


2006 ◽  
Vol 23 (2) ◽  
pp. 141-143 ◽  
Author(s):  
William B. Leak

Abstract Records from the early 1950s on the Bartlett Experimental Forest in New Hampshire showed that the percentage of American beech trees infected with heavy beech scale and Nectria was up to the 80 to 90% range. An inventory of beech bark disease conditions in three stands in 2004 showed that an older, uneven-aged stand managed by individual tree selection for 50 years had over 70% of the basal area in clean- (or disease-free) and rough-barked trees—trees that showed resistance or partial resistance to the disease; 15% of the basal area was clean. In contrast, an adjacent essentially unmanaged stand had well over 60% of the basal area in Nectria-damaged trees—those with sunken bark because of cambial mortality. A young unmanaged stand had a little over 60% of the basal area in mostly rough-barked trees. Records indicate that the amount of beech was not reduced by the disease in any of the inventoried stands. Apparently, single-tree selection over a 50-year period has substantially improved the disease resistance and merchantable potential of the stand.


2020 ◽  
Vol 66 (5) ◽  
pp. 623-633
Author(s):  
Y H Weng ◽  
J Grogan ◽  
D W Coble

Abstract Growth response to thinning has long been a research topic of interest in forest science. This study presents the first 3–4 years of response of loblolly pine (Pinus taeda L.) growth to thinning at different intensities. Data were collected from the East Texas Pine Research Project’s region-wide loblolly pine thinning study, which covers a wide variety of stand conditions. Four treatments, light, moderate, and heavy thinning, respectively having 370, 555, and 740 residual trees per hectare after thinning, and an unthinned control, were included. Individual tree diameter at breast height (dbh) and total height were recorded annually for the first 3–4 years after thinning. Results indicate significant differences between treatments in dbh growth in each year after thinning, as well as for all years combined. Each thinning treatment had significantly greater dbh growth than the control in the first growing season with this positive response being more evident in the case of the heavier thinning or at the later years post-thinning. Conversely, the thinning effect on tree height growth was initially negligibly negative, then becoming positive after 2–4 years, with the heavier thinning becoming positive sooner. Tree size class, assigned based on prethinning dbh, had a significant effect on both dbh and height growth responses. Compared to the control, small trees had a greater response both in dbh and in height growth than the medium and large trees over the measurement period. At the stand level, the heavier thinning had significantly less stand basal area per hectare, but the difference in stand basal area per hectare between the thinned and the unthinned plots decreased with years post-thinning. Results from this study can improve our understanding in thinning effects and help forest managers make accurate decisions on silvicultural regimes.


1988 ◽  
Vol 18 (7) ◽  
pp. 859-866 ◽  
Author(s):  
K. L. O'Hara

The growth of individual trees from four thinning treatments in a 64-year-old Douglas-fir (Pseudotsugamenziesii (Mirb.) Franco) stand was analyzed to determine desirable residual stand structures after thinning. Dominant and codominant trees had the highest individual tree stem volume growth rates over the previous 5 years, and accounted for most stand volume growth in thinned and unthinned stands. Two measures of growing space, crown projection area and sapwood basal area (a surrogate for leaf area), were used to measure how efficiently individual trees used their growing space. Crown classes were useful in characterizing growing space efficiency (volume growth per unit of growing space) only in the unthinned treatment. In thinned treatments, tall trees with medium-sized crowns were most efficient, while in the unthinned treatment, tall trees with relatively large crowns were most efficient. A large crown in an unthinned stand was comparable in size to a medium-sized crown in a thinned stand. Results suggest growing space is not limiting individual tree growth in thinned stands and that thinning to a particular stand structure is more appropriate than thinning to a particular level of stand density.


1993 ◽  
Vol 23 (10) ◽  
pp. 2126-2132 ◽  
Author(s):  
Glenn R. Glover ◽  
Bruce R. Zutter

A site-preparation study installed in 1959 in Fayette County, Alabama, U.S.A., provides data to evaluate long-term effects of varying densities of hardwood on loblolly pine (Pinustaeda L.) plantation growth, yield, and stand structure. Six treatments (hand girdle; bulldoze scarification; herbicide applied to axe frill, chain frill, and with an injector; and an untreated check) were installed as a randomized complete block with five replications. Periodic measurements of pine and hardwood size and density show that higher hardwood densities existing early in the pine plantation had a substantial negative effect on loblolly pine survival and basal area yield, with the bulldoze and herbicide treatments having less hardwood and higher survival and stand basal area. Pine total height and diameter at breast height were reduced by increasing hardwood density early in the life of the plantation, but size of surviving trees differed little among treatments at later ages, except on plots where most pine trees were suppressed by hardwoods. Strong relationships between pine basal area per hectare at age 27 and both number of hardwood stems at age 3 and percentage of stand basal area in hardwood at age 6 were noted. These relationships indicate promise for predicting long-term growth and yield of loblolly pine plantations from early measures of hardwood interference.


2005 ◽  
Vol 22 (2) ◽  
pp. 124-131 ◽  
Author(s):  
Thomas J. Seablom ◽  
David D. Reed

Abstract Seven northern hardwood stands were evaluated for damage after mechanized harvesting. Four different harvesting systems were evaluated: harvester and grapple skidder, processor and forwarder, chainsaw and cable skidder, and chainsaw and forwarder. There was not an excessive amount of damage occurring to any of the residual stands, and there was an adequate number of residual trees per acre in all diameter classes to meet residual stand structure goals. The majority of the damage that did occur was to the bole portion of the tree and to the 2–8-in. dbh size classes. There was no strong relationship between amount of damage occurring to residual trees and the number of residual trees per acre, residual basal area per acre, or distance to skid trail. These results indicate that mechanized harvesting can be used in northern hardwoods without causing excessive damage to the residual stand. Recommendations are to continue with current silvicultural prescriptions and to increase forester-operator communication to minimize residual tree damage.North. J. Appl. For. 22(2):124–131.


1996 ◽  
Vol 26 (10) ◽  
pp. 1838-1848 ◽  
Author(s):  
P. Lejeune

A model predicting circumference growth of individual trees has been developed for mixed irregular stands dominated by Fagussilvatica L. in southeastern Belgium. This model integrates simultaneously tree, stand, and growing site characteristics without considering distances between individual trees. It has a determination coefficient of 40.1% and a residual standard deviation of 0.45 cm/year. Forest mensuration variables considered in the model are circumference, tree social position represented by the total basal area of trees greater than the subject tree, stand basal area, and some index of stand structure corresponding to the ratio of the variance over the mean circumference. The site component is essentially expressed by the length of the growing period. The low accuracy obtained for individual tree growth is relative because the results are used mainly after individual trees have been distributed into size classes. We have been able to show that the introduction of crown description in the model can increase its accuracy. But this modification requires a submodel describing crown changes over time.


2019 ◽  
Author(s):  
Johanna C. Metzger ◽  
Jens Schumacher ◽  
Markus Lange ◽  
Anke Hildebrandt

Abstract. Although stemflow oftentimes represents only a small portion of net precipitation in forests, it creates hot spots of water input that can affect subsurface stormflow dynamics. The distribution of stemflow over different trees is assumed to be temporally stable, yet often unknown. Therefore, it is essential to know the systematic factors driving stemflow patterns. Several drivers have been identified in the past, mainly related to tree traits. Less attention has yet been paid to tree neighbourhood interactions impacting stemflow generation and creating stand patches with enhanced or reduced stemflow. We recorded stemflow in 26 precipitation events on 65 trees, growing in 11 subplots (100 m² each), in a temperate mixed beech forest in the Hainich National Park, Germany. We used linear mixed effects models to investigate how traits of individual trees (tree size, tree species, number of neighbouring trees, their basal area, and their relative height) affect stemflow and how stemflow is affected by stand properties (stand, biomass and diversity metrics). As expected, stemflow increased with event and tree size. Stemflow was highly variable at both tree and subplot scale. Especially in large rainfall events (> 10 mm), tree/subplot ranking was almost identical between events, probably due to fully developed flow paths bringing out the full stemflow potential for each tree. Neighbourhood and stand structure were increasingly important with event size (15 % of fixed effects on the tree scale, ca. 65 % on the subplot scale for large events). Subplot scale stemflow was especially enhanced by a higher proportion of woody surface, expressed by a high number of trees, low leaf area and a large maximum tree size. Simpson’s diversity index contributed positively to stemflow yield in large events, probably by allowing more efficient space occupation. Also, our models suggest that neighbourhood impacts individual tree morphology, which may additionally increase stemflow in dense, species diverse neighbourhoods. Unexpectedly, rain shading within the canopy had little impact on stemflow spatial variation. Overall, we find a strong cross-scale temporal stability. Tree size and tree density were the main drivers, independently increasing stemflow, creating forest patches with strongly enhanced or reduced stemflow. Our results show that, besides tree metrics, also forest structure and potentially diversity affect stemflow patterns and associated potentially biogeochemical hotspots.


1981 ◽  
Vol 11 (2) ◽  
pp. 310-316 ◽  
Author(s):  
Melinda Moeur ◽  
Alan R. Ek

A distance-independent, individual tree based growth model (the multipurpose forest projection system (MFPS)) was used to project changes in stand structure on aspen, red pine, and jack pine cover types in northern Minnesota for 37 years. Individual 0.058-ha plot projections, projections of plots aggregated within stands, and projections of plots aggregated within cover types were compared with each other and with observed plot conditions. Actual plot observations were available for up to 17 years. Individual plot, stand, and cover-type aggregations produced very similar projections in terms of number of trees, average diameter, basal area, and biomass. Plot by plot projections were most accurate in comparison with observed conditions, followed by stand and then cover-type aggregations. Differences from actual values and among projections generally increased with longer projections.


Sign in / Sign up

Export Citation Format

Share Document