Normal Percentile Reference Curves and Correlation of Acetabular Index and Acetabular Depth Ratio in Children

2018 ◽  
Vol 38 (3) ◽  
pp. 163-169 ◽  
Author(s):  
Eduardo N. Novais ◽  
Zhaoxing Pan ◽  
Patrick T. Autruong ◽  
Mariana L. Meyers ◽  
Frank M. Chang
2013 ◽  
Author(s):  
Christine Wohlfahrt-Veje ◽  
Jeanette Tinggaard ◽  
Annette Mouritsen ◽  
Casper Hagen ◽  
Mikkel Grunnet ◽  
...  
Keyword(s):  
Body Fat ◽  
X Ray ◽  

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 445
Author(s):  
José Valdez Aguilar ◽  
César A. Juárez-Alvarado ◽  
José M. Mendoza-Rangel ◽  
Bernardo T. Terán-Torres

Concrete barely possesses tensile strength, and it is susceptible to cracking, which leads to a reduction of its service life. Consequently, it is significant to find a complementary material that helps alleviate these drawbacks. The aim of this research was to determine analytically and experimentally the effect of the addition of the steel fibers on the performance of the post-cracking stage on fiber-reinforced concrete, by studying four notch-to-depth ratios of 0, 0.08, 0.16, and 0.33. This was evaluated through 72 bending tests, using plain concrete (control) and fiber-reinforced concrete with volume fibers of 0.25% and 0.50%. Results showed that the specimens with a notch-to-depth ratio up to 0.33 are capable of attaining a hardening behavior. The study concludes that the increase in the dosage leads to an improvement in the residual performance, even though an increase in the notch-to-depth ratio has also occurred.


Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3583 ◽  
Author(s):  
Keila Robalo ◽  
Eliana Soldado ◽  
Hugo Costa ◽  
Luís Carvalho ◽  
Ricardo do Carmo ◽  
...  

The sustainability concerns of concrete construction are focused both on the materials’ eco-efficiency and on the structures’ durability. The present work focuses on the characterization of low cement concrete (LCC), regarding time-dependent and durability properties. LCC studies which explore the influence of the formulation parameters, such as the W/C (water/cement ratio), W/Ceq, (which represents the mass ratio between water and equivalent cement), W/B (water/binder) ratio, and the reference curves, on the aforementioned properties are limited. Thus, several LCC mixtures were formulated considering two dosages of binder powder, 350 and 250 kg/m3, the former with very plastic consistency and the latter with dry consistency, which were combined with a large spectrum of cement replacement rates (up to 70%), through adding fly ash and limestone filler, and with different compactness levels. The main objectives were to study the influence of the formulation parameters on the properties: shrinkage and creep, accelerated carbonation and water absorption, by capillarity, and by immersion. The lifetime of structures produced with the studied LCC was estimated, considering the durability performance, regarding the carbonation effect on the possible corrosion of the steel reinforcement. LCC mixtures with reduced cement dosage and high compactness, despite the high W/C ratios, have low shrinkage and those with higher strength have reduced creep, however depending on W/Ceq ratio. Those mixtures can be formulated and produced presenting good performance regarding carbonation resistance and, consequently, a long lifetime, which is mandatory for a sustainable construction. LCC with 175 kg/m3 of cement dosage is an example with higher lifetime than current concrete with 250 kg/m3 of cement; depending on the XC exposure classes (corrosion induced by carbonation), the amount of cement can be reduced between 37.5% and 42%, since the LCC with 175 kg/m3 of cement allows reducing the concrete cover below the minimum recommended, ensuring simultaneously the required lifetime for current and special structures.


2006 ◽  
Vol 166 (6) ◽  
pp. 573-578 ◽  
Author(s):  
Michael Huerta ◽  
Michael Gdalevich ◽  
Alla Tlashadze ◽  
Shimon Scharf ◽  
Menachem Schlezinger ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document