scholarly journals Nanoparticles made of multi-block copolymer of lactic acid and ethylene glycol containing periodic side-chain carboxyl groups for oral delivery of cyclosporine A

2010 ◽  
Vol 7 (suppl_4) ◽  
Author(s):  
D. D. Ankola ◽  
A. Battisti ◽  
R. Solaro ◽  
M. N. V. Ravi Kumar
Keyword(s):  
Molecular Weight ◽  
Particle Size ◽  
Lactic Acid ◽  
Block Copolymer ◽  
Ethylene Glycol ◽  
Cyclosporine A ◽  
Oral Delivery ◽  
Entrapment Efficiency

The purpose of this study was to evaluate the potential of new carboxylated multi-block copolymer of lactic acid and ethylene glycol (EL14) for nanoparticle (NP) formation and their ability to deliver high molecular weight hydrophobic drug—cyclosporine A (CsA). CsA-loaded EL14 NPs were compared with traditional poly(lactide-co-glycolide) (PLGA) NPs, both prepared by emulsion–diffusion–evaporation process. On the one hand, the increase in drug payload from 10 to 30 per cent for EL14 NPs showed no difference in particle size, however the entrapment efficiency tends to decrease from 50 to 43 per cent; on the other hand, the more hydrophobic PLGA showed an increasing trend in entrapment efficiency from 20 to 62 per cent with increasing particle size. Over 90 per cent of CsA was released in vitro from both the nanoparticulates; however, the release was much slower in the case of more hydrophobic PLGA. On in vivo evaluation in rats, the NPs made of EL14 showed a higher C max , a faster T max and enhanced tissue levels to that of PLGA that are crucial for CsA's activity and toxicity; however, the overall bioavailability of the nanoparticulates was similar and higher than Neoral. Together these data demonstrate the feasibility of NPs made of low molecular weight, hydrophilic polymer EL14 for efficient delivery of CsA.

scholarly journals USE OF LACTIC ACID AND SPAN 80 IN THE FORMULATION OF LIPID BASED IMIQUIMOD VESICLES FOR GENITAL WARTS

2017 ◽  
Vol 9 (2) ◽  
pp. 292
Author(s):  
Saroj Jain ◽  
Anupama Diwan ◽  
Satish Sardana
Keyword(s):  
Particle Size ◽  
Lactic Acid ◽  
Zeta Potential ◽  
Spherical Shape ◽  
Entrapment Efficiency ◽  
Genital Warts ◽  
Formulation Development ◽  
Span 80

<p><strong>Objective: </strong>The objective of present study was formulation development of imiquimod using lactic acid and span 80 for topical delivery to cure genital warts.</p><p><strong>Methods: </strong>Lipid based vesicles (LBV) of 2% imiquimod were prepared with phospholipoin 90G, ethanol, lactic acid and span 80 using central composite design. The prepared vesicles were optimized statistically and characterized for particle size, zeta potential, percentage entrapment efficiency (% EE) and transmission electron microscopy (TEM). The optimized LBV were incorporated into gel formulation which was evaluated and compared with control gel and marketed formulation.</p><p><strong>Results: </strong>The optimized vesicles had particle size 394.8±9.6 nm, zeta potential-16.5±2.5 mV, % EE 88.27±0.45 and TEM study confirmed the formation of vesicular structure with spherical shape. The gel formulation of imiquimod vesicles showed positive results like spreadability 14.3±0.34 gcm/s, viscosity 13500±1.67 cp, consistency 6.1±0.14 mm and extrudability 16.47±0.11 g/cm<sup>2</sup>. <em>In vitro</em> permeation amount of drug was remarkably lower (10.13 %) than control (87.17 %) and marketed formulation (27.46 %). Results of retained drug for both <em>in vitro</em> as well as <em>in vivo</em> permeation study and local accumulation efficiency (4.021±0.2292) were considerably higher for LBV gel than control (0.1008±0.002513) and marketed formulation (0.8314±0.0300). To understand the mechanism of interaction between skin and vesicles, fourier transform infra-red spectroscopy studies were also done. Results of skin irritancy test and histological examination revealed biocompatible nature of formulation.</p><p><strong>Conclusion: </strong>Results of <em>in vitro </em>and <em>in vivo</em> studies indicated that this vesicle gel formulation provided efficient and site specific dermal delivery of imiquimod for cure of genital warts.</p>

scholarly journals FORMULATION AND QBD BASED OPTIMIZATION OF METHOTREXATE-LOADED SOLID LIPID NANOPARTICLES FOR AN EFFECTIVE ANTI-CANCER TREATMENT

2021 ◽  
pp. 132-143
Author(s):  
CHAITALI SURVE ◽  
RUCHI SINGH ◽  
ANANYA BANERJEE ◽  
SRINIVAS PATNAIK ◽  
SUPRIYA SHIDHAYE
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Oral Delivery ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Polydispersity Index ◽  
In Vivo Studies ◽  
Solid Lipid

Objective: In the current study, the Quality by Design method was utilized for the formulation of solid lipid nanoparticles of Methotrexate (MTX SLNs). Methods: MTX SLNs formulated by melt emulsification method were studied for the effect of independent variables viz. concentration of lipid and surfactants on quality attributes viz. particle size, polydispersity index, and entrapment efficiency of SLNs using 32 factorial design. Results: The optimal formulation was spherical, had a particle size of 147.6±4.1 nm (z-average), a polydispersity index of 0.296±0.058, a zeta potential of −19±0.98 mV, encapsulation efficiency of 98.7±1.55%, and a cumulative drug release of 95.59±0.918% in 5 h. Conclusion: The  in vitro and in vivo studies revealed that SLNs provide a promising oral delivery system to improve the bioavailability of MTX.

Solid Lipid Nanoparticles of Dronedarone Hydrochloride for Oral Delivery: Optimization, In Vivo Pharmacokinetics and Uptake Studies

2019 ◽  
Vol 7 (5) ◽  
pp. 375-388 ◽  
Author(s):  
Vaishali M. Gambhire ◽  
Makarand S. Gambhire ◽  
Nisharani S. Ranpise
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Oral Bioavailability ◽  
Oral Delivery ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Pharmacokinetic Studies ◽  
Solid Lipid

Background: Dronedarone HCl (DRD), owing to its poor aqueous solubility and extensive presystemic metabolism shows low oral bioavailability of about 4% without food, which increases to approximately 15% when administered with a high fat meal. Objective: Solid lipid nanoparticles (SLN) were designed with glyceryl monstearate (GMS) in order to improve oral bioavailability of DRD. Methods: Hot homogenization followed by probe sonication was used to prepare SLN dispersions. Box-Behnken design was used to optimize manufacturing conditions. SLN were characterized for particle size, zeta potential, entrapment efficiency, physical state and in vitro drug release. Pharmacokinetics and intestinal uptake study of dronedarone HCl loaded solid lipid nanoparticles (DRD-SLN) in the presence and absence of endocytic uptake inhibitor, chlorpromazine (CPZ) was performed with conscious male Wistar rats. Results: Optimized formulation of SLN showed particle size of 233 ± 42 nm and entrapment efficiency of 87.4 ± 1.29%. Results of pharmacokinetic studies revealed enhancement of bioavailability of DRD by 2.68 folds from SLN as compared to DRD suspension. Significantly reduced bioavailability of DRD-SLNs in the presence of chlorpromazine, demonstrated the role of endocytosis in uptake of SLN formulation. Conclusion: These results indicated that dronedarone HCl loaded SLN could potentially be exploited as a delivery system for improving oral bioavailability by minimizing first pass metabolism.

scholarly journals Effect of Chitosan Coating on PLGA Nanoparticles for Oral Delivery of Thymoquinone: In Vitro, Ex Vivo, and Cancer Cell Line Assessments

Coatings ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 6
Author(s):  
Sultan Alshehri ◽  
Syed Sarim Imam ◽  
Md Rizwanullah ◽  
Khalid Umar Fakhri ◽  
Mohd Moshahid Alam Rizvi ◽  
...  
Keyword(s):  
Breast Cancer ◽  
Particle Size ◽  
Oral Delivery ◽  
Ex Vivo ◽  
Cancer Cell Line ◽  
Entrapment Efficiency ◽  
Plga Nanoparticles ◽  
Cancer Management ◽  
Mcf 7

In the present study, thymoquinone (TQ)-encapsulated chitosan- (CS)-coated poly(d,l-lactide-co-glycolide) (PLGA) nanoparticles (NPs) were formulated using the emulsion evaporation method. NPs were optimized by using 33-QbD approach for improved efficacy against breast cancer. The optimized thymoquinone loaded chitosan coated Poly (d,l-lactide-co-glycolide) nanoparticles (TQ-CS-PLGA-NPs) were successfully characterized by different in vitro and ex vivo experiments as well as evaluated for cytotoxicity in MDA-MB-231 and MCF-7 cell lines. The surface coating of PLGA-NPs was completed by CS coating and there were no significant changes in particle size and entrapment efficiency (EE) observed. The developed TQ-CS-PLGA-NPs showed particle size, polydispersibility index (PDI), and %EE in the range between 126.03–196.71 nm, 0.118–0.205, and 62.75%–92.17%. The high and prolonged TQ release rate was achieved from TQ-PLGA-NPs and TQ-CS-PLGA-NPs. The optimized TQ-CS-PLGA-NPs showed significantly higher mucoadhesion and intestinal permeation compared to uncoated TQ-PLGA-NPs and TQ suspension. Furthermore, TQ-CS-PLGA-NPs showed statistically enhanced antioxidant potential and cytotoxicity against MDA-MB-231 and MCF-7 cells compared to uncoated TQ-PLGA-NPs and pure TQ. On the basis of the above findings, it may be stated that chitosan-coated TQ-PLGA-NPs represent a great potential for breast cancer management.

scholarly journals Local Toxicity of Topically Administrated Thermoresponsive Systems: In Vitro Studies with In Vivo Correlation

2018 ◽  
Vol 47 (3) ◽  
pp. 426-432 ◽  
Author(s):  
Sivan Yogev ◽  
Ayelet Shabtay-Orbach ◽  
Abraham Nyska ◽  
Boaz Mizrahi
Keyword(s):  
Block Copolymer ◽  
Ethylene Glycol ◽  
Medical Devices ◽  
Poly Lactic Acid ◽  
Poly Ethylene Glycol ◽  
Thermoresponsive Polymers ◽  
Wide Range ◽  
Poly Ethylene

Thermoresponsive materials have the ability to respond to a small change in temperature—a property that makes them useful in a wide range of applications and medical devices. Although very promising, there is only little conclusive data about the cytotoxicity and tissue toxicity of these materials. This work studied the biocompatibility of three Food and Drug Administration approved thermoresponsive polymers: poly( N-isopropyl acrylamide), poly(ethylene glycol)-poly(propylene glycol)-poly(ethylene glycol) tri-block copolymer, and poly(lactic acid-co-glycolic acid) and poly(ethylene glycol) tri-block copolymer. Fibroblast NIH 3T3 and HaCaT keratinocyte cells were used for the cytotoxicity testing and a mouse model for the in vivo evaluation. In vivo results generally showed similar trends as the results seen in vitro, with all tested materials presenting a satisfactory biocompatibility in vivo. pNIPAM, however, showed the highest toxicity both in vitro and in vivo, which was explained by the release of harmful monomers and impurities. More data focusing on the biocompatibility of novel thermoresponsive biomaterials will facilitate the use of existing and future medical devices.

scholarly journals Development, Optimisation and Evaluation of Ketoprofen Lipospheres

2020 ◽  
Vol 11 (SPL4) ◽  
pp. 1853-1863
Author(s):  
Shubhra Rai ◽  
Gopal Rai ◽  
Ashish Budhrani
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Research Work ◽  
Extended Period ◽  
Entrapment Efficiency ◽  
Inflammatory Activity ◽  
Scanning Calorimetry ◽  
Anti Inflammatory

Lipospheres represent a novel type of fat-based encapsulation system produced for the topical drug delivery of bioactive compounds. The goal of this research work was to develop lipospheres, including ketoprofen applied for topical skin drug delivery. Ketoprofen lipospheres were formulated by melt emulsification method using stearic acid and Phospholipon® 90G. The lipospheres were analysed in terms of particle size and morphology, entrapment efficiency, Differential scanning calorimetry, In-vitro drug release, In-vivo (Anti-inflammatory activity). Outcomes of research revealed that particle size was found to be 9.66 µm and entrapment efficiency 86.21 ± 5.79 %. In-vivo, the study of ketoprofen loaded lipospheres formulation shows a higher plain formulation concentration in plasma (5.61 mg/mL). For dermis, ketoprofen retention was 27.02 ± 5.4 mg/mL for the lipospheres formulation, in contrast to that of the plain formulation group (10.05 ± 2.8 mg/mL). The anti-inflammatory effect of liposphere drug delivery systems was assessed by the xylene induced ear oedema technique and compared with marketed products. Finally, it seems that the liposphere drug delivery system possesses superior anti-inflammatory activity as compared to the marketed product gel consistencies. Liposphere may be capable of entrapping the medicament at very high levels and controlling its release over an extended period. Liposphere furnishes a proper size for topical delivery as well as is based on non-irritating and non-toxic lipids; it’s a better option for application on damaged or inflamed skin.

scholarly journals DEVELOPMENT OF RITONAVIR LOADED NANOPARTICLES: IN VITRO AND IN VIVO CHARACTERIZATION

2018 ◽  
Vol 11 (3) ◽  
pp. 284
Author(s):  
Pravin S Patil ◽  
Shashikant C Dhawale
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Dissolution Rate ◽  
Drug Carrier ◽  
Entrapment Efficiency ◽  
Significant Rise ◽  
Scanning Calorimetry ◽  
In Vitro Drug Release

 Objective: The purpose of the present investigation was to develop a nanosuspension to improve dissolution rate and oral bioavailability of ritonavir.Methods: Extended-release ritonavir loaded nanoparticles were prepared using the polymeric system by nanoprecipitation technique. Further, the effect of Eudragit RL100 (polymeric matrix) and polyvinyl alcohol (surfactant) was investigated on particle size and distribution, drug content, entrapment efficiency, and in vitro drug release from nanosuspension where a strong influence of polymeric contents was observed. Drug-excipient compatibility and amorphous nature of drug in prepared nanoparticles were confirmed by Fourier transform infrared spectroscopy, differential scanning calorimetry, and powder X-ray diffraction studies, respectively.Results: Hydrophobic portions of Eudragit RL100 could result in enhanced encapsulation efficiency. However, increase in polymer and surfactant contents lead to enlarged particle size proportionately as confirmed by transmission electron microscopy. Nanosuspension showed a significant rise in dissolution rate with complete in vitro drug release as well as higher bioavailability in rats compared to the pure drug.Conclusion: The nanoprecipitation technique used in present research could be further explored for the development of different antiretroviral drug carrier therapeutics.

scholarly journals Development of NIPAAm-PEG acrylate polymeric nanoparticles for co-delivery of paclitaxel with ellagic acid for the treatment of breast cancer

2019 ◽  
Vol 39 (3) ◽  
pp. 271-278 ◽  
Author(s):  
Suruchi Suri ◽  
Mohd. Aamir Mirza ◽  
Md. Khalid Anwer ◽  
Abdullah S. Alshetaili ◽  
Saad M. Alshahrani ◽  
...  
Keyword(s):  
Breast Cancer ◽  
Particle Size ◽  
Ellagic Acid ◽  
Oral Delivery ◽  
Polymeric Nanoparticles ◽  
Entrapment Efficiency ◽  
Shell Nanoparticles ◽  
Transmission Electron ◽  
Core Shell Nanoparticles

Abstract The aim of the current study was to develop a dual-loaded core shell nanoparticles encapsulating paclitaxel (PTX) and ellagic acid (EA) by membrane dialysis method. Based on particle size, polydispersity index (PDI), and entrapment efficiency, the dual drug-loaded nanoparticles (F2) was optimized. The optimized nanoparticles (F2) showed a particle size of 140±2 nm and a PDI of 0.23±3. The size and the morphology were confirmed by transmission electron microscopy (TEM) and found agreement with the results of dynamic light scattering. The entrapment efficiencies of total drug (PTX and EA), PTX, and EA in the nanoparticles (F2) were measured as 80%, 62.3%, and 37.7%, respectively. The in vitro release profile showed a controlled release pattern for 48 h. A higher cytotoxicity was observed with nanoparticles (F2) in comparison to free PTX. The results revealed that co-delivery of PTX and EA could be used for its oral delivery for the effective treatment of breast cancer.

Formulation and evaluation of resveratrol loaded cubosomal nanoformulation for topical delivery

2020 ◽  
Vol 17 ◽  
Author(s):  
Bhaskar Kurangi ◽  
Sunil Jalalpure ◽  
Satveer Jagwani
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Topical Application ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Drug Permeation

Aim: The aim of the study was to formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC) through topical application. Background: Resveratrol (RV) is a nutraceutical compound that has exciting pharmacological potential in different diseases including cancers. Many studies of resveratrol have been reported for anti-melanoma activity. Due to its low bioavailability, the activities of resveratrol are strongly limited. Hence, an approach with nanotechnology has been done to increase its activity through transdermal drug delivery. Objective: To formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC). To evaluate resveratrol-loaded cubosomal gel (RC-Gel) for its topical application. Methods: RC was formulated by homogenization technique and optimized using a 2-factor 3-level factorial design. Formulated RCs were characterized for particle size, zeta potential, and entrapment efficiency. Optimized RC was evaluated for in vitro release and stability study. Optimized RC was further formulated into cubosomal gel (RC-Gel) using carbopol and evaluated for drug permeation and deposition. Furthermore, developed RC-Gel was evaluated for its topical application using skin irritancy, toxicity, and in vivo local bioavailability studies. Results: The optimized RC indicated cubic-shaped structure with mean particle size, entrapment efficiency, and zeta potential were 113±2.36 nm, 85.07 ± 0.91%, and -27.40 ± 1.40 mV respectively. In vitro drug release of optimized RC demonstrated biphasic drug release with the diffusion-controlled release of resveratrol (RV) (87.20 ± 2.25%). The RC-Gel demonstrated better drug permeation and deposition in mice skin layers. The composition of RC-Gel has been proved non-irritant to the mice skin. In vivo local bioavailability study depicted the good potential of RC-Gel for skin localization. Conclusion: The RC nanoformulation proposes a promising drug delivery system for melanoma treatment simply through topical application.

Sign in / Sign up

Export Citation Format

Share Document