scholarly journals Vibrometry as a noncontact alternative to dynamic and viscoelastic mechanical testing in cartilage

2021 ◽  
Vol 18 (185) ◽  
Author(s):  
M. Gabriela Espinosa ◽  
Gaston A. Otarola ◽  
Jerry C. Hu ◽  
Kyriacos A. Athanasiou

Physiological loading of knee cartilage is highly dynamic and may contribute to the progression of osteoarthritis. Thus, an understanding of cartilage's dynamic mechanical properties is crucial in cartilage research. In this study, vibrometry was used as a fast (2 h), noncontact and novel alternative to the slower (30 h), traditional mechanical and biochemical assays for characterization of cartilage from the condyle, patella, trochlear groove and meniscus. Finite-element models predicted tissue resonant frequencies and bending modes, which strongly correlated with experiments ( R 2 = 0.93). Vibrometry-based viscoelastic properties significantly correlated with moduli from stress relaxation and creep tests, with correlation strengths reaching up to 0.78. Loss modulus also strongly correlated with glycosoaminoglycan (GAG) content. Dynamic properties measured by vibrometry significantly differed among various knee cartilages, ranging between 6.1 and 56.4 MPa. Interestingly, meniscus viscoelastic properties suggest that contrary to common belief, it may lack shock absorption abilities; instead, condylar hyaline cartilage may be a better shock absorber. These data demonstrate for the first time that vibrometry is a noncontact approach to dynamic mechanical characterization of hyaline and fibrocartilage cartilage with concrete relationships to standard quasi-static mechanical testing and biochemical composition. Thus, with a single tool, vibrometry greatly facilitates meeting multiple regulatory recommendations for mechanical characterization of cartilage replacements.

2022 ◽  
Vol 119 (3) ◽  
pp. e2117232119
Author(s):  
Giulio Franchini ◽  
Ivan D. Breslavsky ◽  
Francesco Giovanniello ◽  
Ali Kassab ◽  
Gerhard A. Holzapfel ◽  
...  

Experimental data and a suitable material model for human aortas with smooth muscle activation are not available in the literature despite the need for developing advanced grafts; the present study closes this gap. Mechanical characterization of human descending thoracic aortas was performed with and without vascular smooth muscle (VSM) activation. Specimens were taken from 13 heart-beating donors. The aortic segments were cooled in Belzer UW solution during transport and tested within a few hours after explantation. VSM activation was achieved through the use of potassium depolarization and noradrenaline as vasoactive agents. In addition to isometric activation experiments, the quasistatic passive and active stress–strain curves were obtained for circumferential and longitudinal strips of the aortic material. This characterization made it possible to create an original mechanical model of the active aortic material that accurately fits the experimental data. The dynamic mechanical characterization was executed using cyclic strain at different frequencies of physiological interest. An initial prestretch, which corresponded to the physiological conditions, was applied before cyclic loading. Dynamic tests made it possible to identify the differences in the viscoelastic behavior of the passive and active tissue. This work illustrates the importance of VSM activation for the static and dynamic mechanical response of human aortas. Most importantly, this study provides material data and a material model for the development of a future generation of active aortic grafts that mimic natural behavior and help regulate blood pressure.


Soft Matter ◽  
2019 ◽  
Vol 15 (28) ◽  
pp. 5562-5573 ◽  
Author(s):  
Hong-Cin Liou ◽  
Fabrizio Sabba ◽  
Aaron I. Packman ◽  
Alex Rosenthal ◽  
George Wells ◽  
...  

This paper presents a metrology approach combining optical coherence elastography measurements of circumferential elastic waves and model-based inverse analyses to nondestructively characterize the viscoelastic properties of soft spherical gels.


2009 ◽  
Vol 17 (1) ◽  
pp. 8-13 ◽  
Author(s):  
Simone M. L. Rosa ◽  
Sônia M. B. Nachtigall ◽  
Carlos A. Ferreira

Author(s):  
Ke-cheng Chen ◽  
Dong Li ◽  
Li-jun Wang ◽  
Necati Özkan ◽  
Xiao Dong Chen ◽  
...  

Dynamic viscoelastic properties of brown rice kernels were investigated using a dynamic mechanical analyzer (DMA). In order to meet the sample requirements for the DMA and prevent moisture loss of rice kernels during the DMA measurements, necessary precautions were taken. To prevent moisture loss of rice kernels during the DMA measurements at temperatures ranging from room temperature to 120 degrees centigrade, rice kernels were wrapped with a thin layer of sealing film. Then the wrapped rice kernels were additionally covered with an aluminum foil. Two ends of the wrapped brown rice kernels were cut with a razor blade; subsequently both ends of the cut rice kernels were filed using fine sandpaper to produce near cylindrical rice kernels with parallel ends. The storage modulus of the rice kernels decreased with increasing temperature and moisture content. The loss modulus and the tan delta (loss factor) of the rice kernels as a function of temperature showed clear peaks, which are associated with the glass transition of rice kernels. Two rice varieties had been investigated, and the results showed that the dynamic viscoelastic properties of these rice samples were not significantly different. The glass transition temperatures for the long-grain rice kernels with the moisture contents of 17.4, 13.8, and 10.9 wt.% were determined as 45, 58, and 66 degrees centigrade, respectively.


2004 ◽  
Vol 48 (5) ◽  
pp. 1123-1134 ◽  
Author(s):  
Matthieu Pouzot ◽  
Lazhar Benyahia ◽  
Taco Nicolai

Sign in / Sign up

Export Citation Format

Share Document