scholarly journals Impacts of Elevated Atmospheric CO2and O3on Paper Birch (Betula papyrifera): Reproductive Fitness

2007 ◽  
Vol 7 ◽  
pp. 240-246 ◽  
Author(s):  
Joseph N. T. Darbah ◽  
Mark E. Kubiske ◽  
Neil Nelson ◽  
Elina Oksanen ◽  
Elina Vaapavuori ◽  
...  
Keyword(s):  
Root Length ◽  
Seed Weight ◽  
Seed Quality ◽  
Germination Rate ◽  
Combined Treatment ◽  
Female Flower ◽  
Reproductive Fitness ◽  
Seedling Mortality ◽  
Flower Production ◽  
Paper Birch

Atmospheric CO2and tropospheric O3are rising in many regions of the world. Little is known about how these two commonly co-occurring gases will affect reproductive fitness of important forest tree species. Here, we report on the long-term effects of CO3and O3for paper birch seedlings exposed for nearly their entire life history at the Aspen FACE (Free Air Carbon Dioxide Enrichment) site in Rhinelander, WI. Elevated CO2increased both male and female flower production, while elevated O3increased female flower production compared to trees in control rings. Interestingly, very little flowering has yet occurred in combined treatment. Elevated CO2had significant positive effect on birch catkin size, weight, and germination success rate (elevated CO2increased germination rate of birch by 110% compared to ambient CO2concentrations, decreased seedling mortality by 73%, increased seed weight by 17%, increased root length by 59%, and root-to-shoot ratio was significantly decreased, all at 3 weeks after germination), while the opposite was true of elevated O3(elevated O3decreased the germination rate of birch by 62%, decreased seed weight by 25%, and increased root length by 15%). Under elevated CO2, plant dry mass increased by 9 and 78% at the end of 3 and 14 weeks, respectively. Also, the root and shoot lengths, as well as the biomass of the seedlings, were increased for seeds produced under elevated CO2, while the reverse was true for seedlings from seeds produced under the elevated O3. Similar trends in treatment differences were observed in seed characteristics, germination, and seedling development for seeds collected in both 2004 and 2005. Our results suggest that elevated CO2and O3can dramatically affect flowering, seed production, and seed quality of paper birch, affecting reproductive fitness of this species.

scholarly journals Interrelationship Among Seed Quality Parameters and Fungi Associated with Seeds of Cotton (Gossypium Hirsutum L.)

2021 ◽  
Vol 8 (1) ◽  
pp. 1061-1067
Author(s):  
Amina Khatun ◽  
Shamim Shamsi ◽  
MA Bashar
Keyword(s):  
Seed Quality ◽  
Rhizopus Oryzae ◽  
Germination Rate ◽  
Trichoderma Viride ◽  
The Other ◽  
Quality Analysis ◽  
Quality Factors ◽  
Seedling Mortality ◽  
Syncephalastrum Racemosum ◽  
Seed Moisture

A total of twenty nine species of fungi namely Aspergillus aculeatus Lizuka, A. flavus Link, A. fumigatus Fresenius, A. niger Van Tiegh, A. nidulans Eidam, A. subramanianii Visagie, Frisvad & Samson, A. tamariiKita G., A. toxicarius Murak, A. wentii Wehmer, Curvularial unata (Wakker) Boedijn, Colletotrichum gloeosporioides (Penz.) Sacc., C. gossypii Southw., Chaetomium globosum Kunze., Fusarium moniliforme J. Shelden, F. nivale (Fr.) Sorauer, F. oxysporum Schlechtendal, F. fujikuroi Nirenberg, F. solani(Mart.) Sacc., Lasiodiplodiatheobromae (Pat.) Griffon & Maubl., Meyerozyma guilliermondii (Wick.) Kurtzman & M. Suzuki., Mucor sp. P. Micheli ex L., Penicillium aculeatum Raper& Fennell, Penicillium citrinum Thom, Rhizoctonia solani Khun., Rhizopus stolonifer (Ehrenb.) Vuill., Rhizopus oryzae Went & Prins. Geerl., Rhizo mucor sp. Luce t & Costantin, Syncephalastrum racemosum Cohn and Trichoderma viride Pers. were found to be associated with the seeds of 14 varieties viz. CB-1 to CB-14 of cotton. Seed quality analysis showed that percentage of pure seeds, germination, moisture, seedling mortality and associated fungi with different varieties of cotton seeds varies from 97.08-99.92%, 80-93%, 10-11.3%, 16.05-50.30% and 24-78.0% respectively. Present study deals with estimation of interrelationship between some quality factors through correlation and regression analysis are important for the assessment of seed quality. There were negative correlations between seedling mortality and purity percentage and between germination rate and fungus frequency. On the other hand, positive correlations were found between germination rate and purity percentage, between seedling mortality and fungus frequency, between purity percentage and fungus frequency, between germination rate and seed moisture and between fungus frequency and seed moisture. CB 8 was superior from the other cotton variety as it showed higher physical purity of seed (98.41%), higher seed germination (92%), lower fungal incidence (24%) and lower mortality of seedling (23.91%). Bioresearch Commu. 8(1): 1061-1067, 2022 (January)

scholarly journals Effects of Water supply on Seed Development and Quality of Chickpea Cultivars

2014 ◽  
Vol 67 (1) ◽  
pp. 37-44
Author(s):  
Kazem Ghassemi-Golezani ◽  
Saeid Ghassemi
Keyword(s):  
Water Supply ◽  
Seed Weight ◽  
Seed Quality ◽  
Germination Rate ◽  
Dry Weight ◽  
Germination Percentage ◽  
Genetic Constitution ◽  
Physiological Quality ◽  
Chickpea Cultivars

AbstractA split plot experiment (using RCB design) with three replications was conducted in 2012 and seed physiological quality of three chickpea (Cicer arietinumL.) cultivars (Azad, Arman and Jame) was evaluated at seven stages under well and limited irrigation conditions. Maximum seed weight (mass maturity) was achieved at 40–45 days after flowering. However, maximum seed quality was obtained 7 to 10 days after mass maturity, depending on irrigation intervals and cultivars. At earlier harvests, because of immaturity, and at later harvests, due to ageing, seed quality was low. Seed filling rate and maximum seed weight of chickpea decreased with decreasing water supply, but water deficit had no significant effects on seed quality as measured by germination percentage, germination rate and seedling dry weight. Significant differences in seedling dry weight among chickpea cultivars were attributed to significant variation in seed weight affected by genetic constitution.

scholarly journals Seed reserves reduction rate and reserves mobilization to the seedling explain the vigour of maize seeds

2019 ◽  
Vol 41 (4) ◽  
pp. 488-497 ◽  
Author(s):  
Gisiane Camargo de Andrade ◽  
Cileide Maria Medeiros Coelho ◽  
Matheus Santin Padilha
Keyword(s):  
Root Length ◽  
Seed Weight ◽  
Dry Matter ◽  
Germination Rate ◽  
Reduction Rate ◽  
Accelerated Ageing ◽  
Seed Vigour ◽  
Seed Technology ◽  
Maize Seeds ◽  
Seed Reserves

Abstract: Understanding how the seed reserve dynamics occurs during germination and seedling formation is determinant for advancements on seed technology. The aims of this study were: to verify which accelerated ageing temperature is the most effective to separate the vigour levels of maize seeds and to evaluate the reserves dynamics during germination and seedling formation process. Seven maize cultivars were submitted to the germination rate, accelerated ageing, thousand seed weight, total seedling length, shoot and root length, dry matter of seed and seedling, remaining dry matter in the endosperm, seed reserves reduction rate, conversion efficiency of reserves, reserves mobilization rate to the seedling and energy expenditure using the completely randomized statistical design. The reserves dynamics and seedling formation depends on the genotype and the initial seed vigour. Accelerated ageing at 45 °C for 72 hours is the most efficient combination to segregate vigour levels. Genotypes with higher seed reserve utilisation efficiency have higher vigour, producing seedlings with higher dry matter, higher total, shoot and root length, regardless of seed weight. The two rates evaluated prompt us to conclude that they explain the maize seed vigour and can be used in quality control programs to select high physiological quality cultivars.

scholarly journals Effect of Row Spacing on Seed Yield, Yield Components and Seed Quality of Alfalfa

2015 ◽  
Vol 15 (1) ◽  
pp. 85
Author(s):  
Dragoljub Beković ◽  
Rade Stanisavljević ◽  
Milan Biberdžić ◽  
Slaviša Stojković ◽  
Jasmina Knežević
Keyword(s):  
Seed Yield ◽  
Yield Components ◽  
Seed Weight ◽  
Seed Quality ◽  
Germination Rate ◽  
Row Spacing ◽  
Grain Number ◽  
Alfalfa Seed ◽  
Thousand Seed Weight

Under agro-environmental conditions of Southern Serbia, the re­search was conducted over a three-year period to evaluate the effect of row spacing on seed yield, yield components and seed quality of alfalfa cv. ’K-23’. The average seed yield of alfalfa was highest at a row spacing of 40 cm (271.7 kg ha-1), followed by row spacing of 20 cm (249.4 kg ha-1) and 60 cm (244.0 kg ha-1). The highest and lowest number of inflo­rescences per stem were obtained in rows spaced 60 cm (13.37 inflo­rescences/stem) and 20 cm apart (8.57 inflorescences/stem), respectively. The widest row spacing of 60 cm (7.15 pods / inflorescence) resulted in the highest number of pods per inflorescence, whereas the lowest number was produced at 20 cm spacing (5.50 pods / inflorescence). Grain number per pod ranged from 3.55 (at 20 cm row spacing) to 4.05 (at 60 cm). The highest quality of alfalfa seed during the three years of the research was obtained at the widest row spacing (60 cm). Thousand-seed weight was highest at 60 cm and lowest at 20 cm (1.97 g and 2.07 g, respectively). The highest average values for seed germination rate were reported for 60 cm row spa­cing (88.00%) and the lowest for 20 cm row spacing (85.76 %).

Yield and Seed quality of barley (Hordeum vulgare L.) as affected by variety, nitrogen level and harvesting time

2014 ◽  
Vol 2 (2) ◽  
pp. 93-100
Author(s):  
Shahnaj Yesmina ◽  
Moushumi Akhtarb ◽  
Belal Hossain
Keyword(s):  
Grain Yield ◽  
Seed Weight ◽  
Seed Quality ◽  
Quality Parameters ◽  
Nitrogen Level ◽  
Yield Attributes ◽  
Harvesting Time ◽  
Nitrogen Levels ◽  
Vigour Index

The experiment was conducted to find out the effect of variety, nitrogen level and harvesting time on yield and seed quality of barley. The treatments used in the experiment consisted of two varieties viz. BARI Barley 4 and BARI Barley 5, three harvesting time viz. 35, 40 and 45 Days after Anthesis (DAA) and nitrogen levels viz. 0, 70, 85 and 100 kg N ha-1 . The experiment was laid out in a spilt- spilt-plot design with three replications assigning the variety to the main plot, harvesting time to the sub-plots and nitrogen level to the sub-sub plots. Variety had significant effects on the all yield attributes except fertile seeds spike-1 . Seed quality parameters viz. normal seeds spike-1 , deformed seeds spike-1 , germination (%) and vigour index were statistically significant. The variety BARI Barley 5 produced higher grain yield and seed quality than BARI Barley 4. Grain yield from BARI Barley 5 and BARI Barley 4 were 4.59 t ha-1 and 4.24 t ha-1 , respectively. Significantly, the highest 1000-seed weight (46.90 g) was produced by BARI Barley 5 than (37.90 g) BARI Barley 4. The result revealed that harvesting time had significant effect on yield and yield attributes and seed quality parameters. Seed yield was highest (4.65 t ha-1 ) when the crop harvested at 40 DAA and it was increased linearly from 35 DAA. Maximum quality seed and 1000-seed weight (43.20 g) was obtained when the crop harvested at 40 DAA. All the yields, yield attributes and seed quality parameters were significantly influenced by nitrogen levels. The highest grain yield (5.14 t ha-1 ) was obtained when BARI Barley 5 variety was fertilized by 100 kg N ha-1 and the lowest (3.14 t ha-1 ) was obtained from control treatments. Normal seeds spike-1 , vigour index, germination (%) were better at 85 kg N ha-1 in variety of BARI Barley 5 than BARI Barley 4. So it can be concluded that BARI Barley 5 showed better result when fertilized with 100 kg N ha-1 and harvested at 40 DAA for getting maximum yield and 85 kg N ha-1 and harvested at 40 DAA for getting better quality seed.

scholarly journals Morphological characterization and genetic diversity in lentil (Lens culinaris medikus ssp. Culinaris) germplasm

2014 ◽  
Vol 4 (1) ◽  
pp. 70-76
Author(s):  
KU Ahamed ◽  
B Akhter ◽  
MR Islam ◽  
MR Humaun ◽  
MJ Alam
Keyword(s):  
Seed Weight ◽  
Female Flower ◽  
Morphological Characterization ◽  
Flower Initiation ◽  
Mean Values ◽  
Maximum Value ◽  
Cluster Distance ◽  
The Mean ◽  
100 Seed Weight ◽  
Number Of Seeds

Genetic divergence of 110 lentil germplasm with checks was assessed based on morphological traits using multivariate analysis. Mahalanobis generalized distance (D2) analysis was used to group the lentil genotypes. Significant variations among lentil genotypes were observed in respect of days to 1st flowering, days to 50% flowering, days to maturity, plant height, and number of pods per peduncle, number of pods per plant, number of seeds per plant, 100 seed weight and yield per plant. Considering the mean values, the germplasm were grouped into ten clusters. The highest number of genotypes (17) was in cluster X and lowest (5) both in cluster II and IV. Cluster IV had the highest cluster mean for number of pods per plant (297.08), number of seeds per plant (594.16), 100 seed weight (1.44 g) and yield per plant (8.53 g). Among them, the highest inter-cluster distance was obtained between the cluster IV and I (24.61) followed by IV and III (22.33), while the lowest was between IX and II (1.63). The maximum value of inter-cluster distance indicated that genotypes belonging to cluster IV were far diverged from those of cluster I. The first female flower initiation was earlier in BD-3812 (49 days) in cluster I and cluster IV had highest grain yield per plant (8.53). BD-3807 produced significant maximum number of pods per plant (298.40) in cluster IV. DOI: http://dx.doi.org/10.3329/ijarit.v4i1.21095 Int. J. Agril. Res. Innov. & Tech. 4 (1): 70-76, June, 2014

scholarly journals MATURATION STAGES OF FRUITS AND PHYSIOLOGICAL SEED QUALITY OF Physalis ixocarpa BROT. EX HORMEN

2017 ◽  
Vol 39 (3) ◽  
Author(s):  
NATÁLIA DOS SANTOS BARROSO ◽  
MANUELA OLIVEIRA DE SOUZA ◽  
LAURA CAROLINA DA SILVA RODRIGUES ◽  
CLAUDINÉIA REGINA PELACANI
Keyword(s):  
Seed Quality ◽  
Germination Rate ◽  
Development Stage ◽  
Physiological Changes ◽  
Ripe Fruit ◽  
Maturation Stages ◽  
Chlorophyll A And B ◽  
Dark Green ◽  
Dry Matter Weight

ABSTRACT Physalis is represented by species that produce fruits with relevant potential for national and international marketing. The species are normally grown from seeds, so maturation studies are important to assist the point of harvest, as well as seeds with a high physiological potential, since the fruits remain enclosed within a cup throughout their development. Despite the nutraceutical importance of fruits and medicinal potential of many species of Physalisinformation on the physiological seeds quality are scarce. This study aimed to monitor the physical and physiological changes of maturation and the viability of seeds during fruit development stages. The fruits of P. ixocarpa were collected in 15, 25, 35, 45, 55 days after anthesis (DAA). Length, diameter, fresh weight, skin and cup coloring characterization, TSS content, number and weight of seeds per fruit were obtained at each development stage. We also evaluated and correlated the coloring and pigment content of the cup (chlorophyll a and b). Water content, dry matter weight and germination rate were measured from fresh and dry seeds (room conditions, 72 hours). The main physical and physiological changes during maturation occurred within 35 DAA. The maximum physiological seeds quality was achieved within 45 DAA when the cup is completely or partially broken with coloring between yellowish-green and light-yellowish-brown and the ripe fruit in dark-green.

Effect of Composting, Leaching and Carbonizing on Alleviating Phytotoxicity of Sewage Sludge

2012 ◽  
Vol 518-523 ◽  
pp. 1733-1736
Author(s):  
Hong Cai ◽  
Yi Bo Wen ◽  
Ji Li
Keyword(s):  
Seed Germination ◽  
Sewage Sludge ◽  
Adverse Effects ◽  
Root Length ◽  
Germination Rate ◽  
Germination Index ◽  
Pretreatment Method

Sewage sludge (SS) contains deleterious constituents that strongly inhibited seed germination. Pretreatment methods of composting, leaching and carbonizing were thus evaluated to alleviate the phytotoxicity. All the pretreatments improved germination rate, root length and germination index of radish seeds. The best performances were presented by composting pretreatment and the pretreatment of carbonizing plus leaching. Composting greatly alleviated phytotoxicity of SS and improved seed germination, however, it also showed stunted root length and germination index compared with the soil control. The adverse effects of composted SS on seed germination were completely eliminated by leaching, while carbonizing had little effect on reversing the stunt. These results indicated that the most effective pretreatment method to alleviate phytotoxicity of SS were composting plus leaching.

scholarly journals High gamma irradiation doses and long storage times reduce soybean seed quality

2016 ◽  
Vol 37 (3) ◽  
pp. 1219
Author(s):  
Danúbia Aparecida Costa Nobre ◽  
Carlos Sigueyuki Sediyama ◽  
Valter Arthur ◽  
Newton Deniz Piovesan ◽  
Alisson Santos Lopes da Silva
Keyword(s):  
Gamma Irradiation ◽  
Seed Quality ◽  
Germination Rate ◽  
Soybean Seed ◽  
Response Surfaces ◽  
Seed Vigor ◽  
Production Cycle ◽  
High Gamma ◽  
Storage Times ◽  
Long Storage

High quality seeds are required for soybean production. This study evaluated the effect of gamma irradiation and storage time on seed quality in soybean lines VX04-6828 and VX04-5692. Seeds were gamma irradiated (60Co) with 0, 50, 150, and 250 Gy. After the first seed production cycle (M1), the harvested seeds were stored in the laboratory for 0, 2, 4, and 6 months. Moisture content, seed quality (germination rate, dead seeds, and normal and abnormal seedlings), and seed vigor (first germination count, germination index, and seedling length) were determined. Data were submitted to analysis of variance for each soybean line using a 4 x 4 factorial design (four storage times x four gamma irradiation doses). Response surfaces were constructed based on the F test significance (p ? 0.05). VX04-5692 seeds were more sensitive to gamma radiation than were VX04-6828 seeds. Soybean seed quality was highest in M2 seeds derived from seeds irradiated with less than 100 Gy and stored for up to two months. High gamma irradiation doses and long storage times reduced soybean seed quality.

scholarly journals Impacts of different salt source and concentrations on germination and seedling growth of many pumpkin seeds used as rootstoch in Iran

Genetika ◽  
2012 ◽  
Vol 44 (2) ◽  
pp. 235-250 ◽  
Author(s):  
Ahmad Dadashpour
Keyword(s):  
Electrical Conductivity ◽  
Seed Germination ◽  
Seedling Growth ◽  
Root Length ◽  
Germination Rate ◽  
Shoot Length ◽  
Root Weight ◽  
Pumpkin Seeds ◽  
High Concentrations ◽  
Shoot Weight

The effects of different salt sources (C Cl2, NaCl, and KCl) and concentrations, as measured by electrical conductivity, (0, "control", 1, 3, 5, 7 and 9 dS m-1) on seed germination and seedling growth of ?Ferro?, ?Obez?, ?RS 841? and ?Strong Tosa F1? pumpkin varieties used as rootstock were investigated in this study. The results showed that germination rate, root length, shoot length, fresh root weight, dry root weight, fresh shoot weight and dry shoot weights tend to decrease when the electrical conductivity of the solution is higher than 5 dS m-1, independent of salt sources and in all of the varieties. Three days after seeding, a germination ratio of 5 % was obtained from RS 841 variety in all salt source and concentrations, while a germination ratio over 50 % was obtained in ?Strong Tosa? variety for the same conditions except CaCl2 salt source. Nevertheless, seeds germinated in medium having high concentrations of CaCl2 had lower germination rate and poor seedling growth, compared to media having the same concentrations of NaCl and KCl. It was concluded that all of the varieties studied were more sensitive to the concentrations prepared using CaCl2 than that of the KCl, and NaCl.

Sign in / Sign up

Export Citation Format

Share Document