scholarly journals Hot isostatic pressing assisted diffusion bonding for application to the Super Proton Synchrotron internal beam dump at CERN

Author(s):  
S. Pianese ◽  
A. Perillo Marcone ◽  
F.-X. Nuiry ◽  
M. Calviani ◽  
K. Adam Szczurek ◽  
...  
2019 ◽  
Vol 34 (36) ◽  
pp. 1942026
Author(s):  
M. Rosenthal ◽  
D. Banerjee ◽  
J. Bernhard ◽  
M. Brugger ◽  
N. Charitonidis ◽  
...  

The Physics Beyond Colliders study investigates the feasibility of future projects and experiments using CERN facilities. In the scope of this study, a future operation of the NA62 experiment using the existing K12 beam line operated in beam dump mode is discussed. Such a setup allows for a search for dark sector particles, e.g. heavy neutral leptons, dark photons and axions. Production of these hypothetical particles requires the 400GeV/c proton beam extracted from the Super Proton Synchrotron (SPS) to be dumped on a massive dump collimator located in the first part of the K12 beam line. The decay of these dark sector particles, for example, into muons could be detected by the NA62 experimental setup. However, muons created in particle interactions with material and from in-flight decays of secondary hadrons pose a critical background for this kind of experiment. Magnetic sweeping serves as an efficient tool for reducing this background. This paper discusses the simulation studies conducted with the software framework G4beamline to reduce the expected single-muon rate for this experiment. The required beam line modifications, in particular the removal of the beryllium target and repositioning of the dump, have been implemented into this model. A comparison of simulated muon distributions and spectra available experimental data, already taken in test runs, has been made in order to validate the beam line simulation. Finally, additional beam line modifications to further suppress the muon background are elaborated upon. These studies show a potential further reduction of a factor four of the total single-muon rate relative to the nominal setup over the full momentum range, and up to a factor twenty considering only muons with momenta [Formula: see text].


2020 ◽  
Vol 158 ◽  
pp. 111796
Author(s):  
Pan Huang ◽  
Yiming Wang ◽  
Huabei Peng ◽  
Jiming Chen ◽  
Pinghuai Wang

2011 ◽  
Vol 678 ◽  
pp. 145-154 ◽  
Author(s):  
Claudio Testani ◽  
F. Ferraro ◽  
Paolo Deodati ◽  
Riccardo Donnini ◽  
Roberto Montanari ◽  
...  

Titanium-metal-matrix composites (Ti-MMC) are materials with very large specific resistance and potential operative temperature up to 800° C. At present these composites are produced by Hot Isostatic Pressing (HIP), a reliable but expensive manufacturing method. To cut production costs, Centro Sviluppo Materiali SpA (CSM) has developed and patented an experimental plant for co-rolling at high temperature sheets of titanium alloy and silicon carbide monofilaments fabrics. The experimental Roll Diffusion Bonding (RDB) pilot plant permits a reduction of process costs of about 40% with respect to the HIP process. This work reports the results of microstructural and mechanical examinations carried out on composites realized by RDB and HIP. The comparison shows that the fibre-matrix interface is stable in both the composites while the mechanical properties of RDB composite are better due to its smaller grain size and high dislocation density.


Sign in / Sign up

Export Citation Format

Share Document