Non-Darcy natural convection flow for non-Newtonian nanofluid over cone saturated in porous medium with uniform heat and volume fraction fluxes

2015 ◽  
Vol 25 (2) ◽  
pp. 422-437 ◽  
Author(s):  
A Chamkha ◽  
S Abbasbandy ◽  
A.M. Rashad
Keyword(s):  
Porous Medium ◽  
Natural Convection ◽  
Mass Flux ◽  
Volume Fraction ◽  
Viscosity Index ◽  
Convection Flow ◽  
Content Type ◽  
Surface Mass ◽  
Uniform Heat ◽  
Nanoparticles Volume Fraction

Purpose – The purpose of this paper is to investigate the effect of uniform lateral mass flux on non-Darcy natural convection of non-Newtonian fluid along a vertical cone embedded in a porous medium filled with a nanofluid. Design/methodology/approach – The resulting governing equations are non-dimensionalized and transformed into a non-similar form and then solved numerically by Keller box finite-difference method. Findings – A comparison with previously published works is performed and excellent agreement is obtained. Research limitations/implications – The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. It is assumed that the cone surface is preamble for possible nanofluid wall suction/injection, under the condition of uniform heat and nanoparticles volume fraction fluxes. Originality/value – The effects of nanofluid parameters, Ergun number, surface mass flux and viscosity index are investigated on the velocity, temperature, and volume fraction profiles as well as the local Nusselt and Sherwood numbers.

Non-equilibrium natural convection in a differentially-heated nanofluid cavity partially filled with a porous medium

2019 ◽  
Vol 29 (8) ◽  
pp. 2524-2544 ◽  
Author(s):  
Mikhail A. Sheremet ◽  
Ioan Pop ◽  
A. Cihat Baytas
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Natural Convection ◽  
Volume Fraction ◽  
Good Control ◽  
Solid Matrix ◽  
Content Type ◽  
Practical Applications ◽  
Nanofluid Viscosity ◽  
Non Equilibrium

Purpose This study aims to numerically analyze natural convection of alumina-water nanofluid in a differentially-heated square cavity partially filled with a heat-generating porous medium. A single-phase nanofluid model with experimental correlations for the nanofluid viscosity and thermal conductivity has been considered for the description of the nanoparticles transport effect in the present study. Local thermal non-equilibrium approach for the porous layer with the Brinkman-extended Darcy model has been used. Design/methodology/approach Dimensionless governing equations formulated using stream function, vorticity and temperature have been solved by the finite difference method. The effects of the Rayleigh number, Ostrogradsky number, Nield number and nanoparticles volume fraction on nanofluid flow, heat and mass transfer have been analyzed. Findings It has been revealed that the dimensionless heat transfer coefficient at the fluid/solid matrix interface can be a very good control parameter for the convective flow and heat transfer intensity. The present results are original and new for the study of non-equilibrium natural convection in a differentially-heated nanofluid cavity partially filled with a porous medium. Originality/value The results of this paper are new and original with many practical applications of nanofluids in the modern industry.

Natural convection from cross blade inside a nanofluid-filled cavity using ISPH method

2020 ◽  
Vol 30 (10) ◽  
pp. 4629-4648
Author(s):  
Zehba A.S. Raizah
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Circular Cylinder ◽  
Volume Fraction ◽  
Working Fluid ◽  
Convection Flow ◽  
Physical Parameters ◽  
Cool Temperature ◽  
Content Type

Purpose The purpose of this study is to apply the incompressible smoothed particle hydrodynamics method for simulating the natural convection flow inside a cavity including cross blades or circular cylinder cylinder. Design/methodology/approach The base fluid is water and copper-water nanofluid is treated as a working fluid. The left and rights walls are maintained at a cool temperature, the horizontal cavity walls are isolated and the inner shape was heated. The physical parameters are the length of the blades L_Blade, the number of cross blades, circular cylinder radius L_R, Rayleigh number Ra and the nanoparticles volume fraction. Findings The results reveal that the lengths of the cross blade, number of the blades and radius of the circular cylinder is working as an enhancement factor for heat transfer and fluid flows inside a cavity. Adding nanoparticles augments heat transfer and reduces the fluid flow intensity inside a cavity. The best case for buoyancy-driven flow was obtained when the inner shape is the circular cylinder at a higher Rayleigh number. Originality/value This work uses a distinctive numerical method to study the natural convection heat from cross blades inside a cavity filled with nanofluid. It provides a new analysis of this issue and presented good results.

FEM-CBS algorithm for convective transport of nanofluids in inclined enclosures filled with anisotropic non-Darcy porous media using LTNEM

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sameh Elsayed Ahmed
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Porous Medium ◽  
Equilibrium State ◽  
Thermal Equilibrium ◽  
Volume Fraction ◽  
Nanofluid Flow ◽  
Content Type ◽  
Thermal Fields ◽  
Nanoparticles Volume Fraction

Purpose The Galerkin finite element method (FEM) based on the characteristic-based split (CBS) scheme is applied to simulate the nanofluid flow and thermal fields inside an inclined geometry filled by a heat-generating hydrodynamically and thermally anisotropic non-Darcy porous medium using the local thermal non-equilibrium model (LTNEM). Property of the hydrodynamic anisotropy is taken in both the Forchheimer coefficient and permeability and these tools are considered as functions of inclination of the principal axes. Also, the thermal conductivity for the porous phase is assumed to be anisotropic. Design/methodology/approach The Galerkin FEM based on the CBS scheme is applied to solve the partial differential equations governing the flow and thermal fields. Findings It is noted that the net rate of the heat transfer between the nanofluid and solid phases are influenced by variations of the anisotropic properties. Also, the system is reached to the thermal equilibrium state at H > 100. Further, the maximum nanofluid temperature is reduced by 12.27% when the nanoparticles volume fraction is varied from 0% to 4%. Originality/value This paper aims to study the nanofluid flow and heat transfer characteristics inside an inclined enclosure filled with a heat-generating, hydrodynamically and thermally anisotropic porous medium using the CBS scheme. The LTNEM is considered between the nanofluid and porous phases while the local thermal equilibrium model (LTEM) between the base fluid (water) and the nanoparticles (alumina) is taken into account. The Galerkin FEM is introduced to discretize the governing system of equations. Also, examine influences of the anisotropic properties (permeability, Forchheimer terms and thermal conductivity of the porous medium), inclination angle and nanoparticles volume fraction on the net rate of the heat transfer between the nanofluid and porous phases and on the local thermal non-equilibrium state is one of the concerns of this paper.

Transient two-dimensional natural convection flow of a nanofluid past an isothermal vertical plate using Buongiorno’s model

2017 ◽  
Vol 27 (1) ◽  
pp. 23-47 ◽  
Author(s):  
Marneni Narahari ◽  
Suresh Kumar Raju Soorapuraju ◽  
Rajashekhar Pendyala ◽  
Ioan Pop
Keyword(s):  
Boundary Layer ◽  
Nusselt Number ◽  
Brownian Motion ◽  
Natural Convection ◽  
Vertical Plate ◽  
Volume Fraction ◽  
Convection Flow ◽  
Nanoparticle Volume Fraction ◽  
Natural Convection Flow ◽  
Content Type

Purpose The purpose of this paper is to present a numerical investigation of the transient two-dimensional natural convective boundary-layer flow of a nanofluid past an isothermal vertical plate by incorporating the effects of Brownian motion and thermophoresis in the mathematical model. Design/methodology/approach The problem is formulated using the Oberbeck–Boussinesq and the standard boundary-layer approximations. The governing coupled non-linear partial differential equations for conservation of mass, momentum, thermal energy and nanoparticle volume fraction have been solved by using an efficient implicit finite-difference scheme of the Crank–Nicolson type, which is stable and convergent. Numerical computations are performed and the results for velocity, temperature and nanoparticle volume fraction are presented in graphs at different values of system parameters such as Brownian motion parameter, thermophoresis parameter, buoyancy ratio parameter, Prandtl number, Lewis number and dimensionless time. The results for local and average skin-friction and Nusselt number are also presented graphically and discussed thoroughly. Findings It is found that the velocity, temperature and nanoparticle volume fraction profiles enhance with respect to time and attain steady-state values as time progresses. The local Nusselt number is found to decrease with increasing thermophoresis parameter, while it increases slightly with increasing Brownian motion parameter. To validate the present numerical results, the steady-state local Nusselt number results for the limiting case of a regular fluid have been compared with the existing well-known results at different Prandtl numbers, and the results are found to be in an excellent agreement. Research limitations/implications The present analysis is limited to the transient laminar natural convection flow of a nanofluid past an isothermal semi-infinite vertical plate in the absence of viscous dissipation and thermal radiation. The unsteady natural convection flow of a nanofluid will be investigated for various physical conditions in a future work. Practical implications Unsteady flow devices offer potential performance improvements as compared with their steady-state counterparts, and the flow fields in the unsteady flow devices are typically transient in nature. The present study provides very useful information for heat transfer engineers to understand the heat transfer enhancement with the nanofluid flows. The present results have immediate relevance in cooling technologies. Originality/value The present research work is relatively original and illustrates the transient nature of the natural convective nanofluid boundary-layer flow in the presence of Brownian motion and thermophoresis.

Motion of circular cylinders during natural convection flow in X-shaped cavity filled with a nanofluid using ISPH method

2021 ◽  
Vol 31 (5) ◽  
pp. 1449-1474 ◽  
Author(s):  
Abdelraheem M. Aly ◽  
Ehab Mahmoud Mohamed
Keyword(s):  
Porous Medium ◽  
Porous Media ◽  
Natural Convection ◽  
Thermal Conditions ◽  
Circular Cylinders ◽  
Convection Flow ◽  
Natural Convection Flow ◽  
Content Type ◽  
Temperature Distributions ◽  
Cold Source

Purpose This study aims to illustrate the impacts of the motion of circular cylinders on the natural convection flow from variable heated partitions inside the X-shaped cavity filled with Al2O3-water nanofluid. A partial layer of a homogeneous/heterogeneous porous medium is located in the top area of the X-shaped cavity. Design/methodology/approach Three different cases of the porous media including homogeneous, horizontal heterogeneous and vertical heterogeneous porous media were considered. Three different thermal conditions of the embedded circular cylinders including hot, cold and adiabatic conditions are investigated. An incompressible scheme of smoothed particle hydrodynamics (ISPH) method is modified to compute the non-linear partial differential equations of the current problem. Two variable lengths of the left and right sides of the X-shaped cavity have a high-temperature Th and a low-temperature Tc, respectively. The other wall parts are adiabatic. The numerical simulations are elucidating the dependence of the heat transfer and fluid flow characteristics on lengths of hot/cold source Lh, porous cases, Darcy parameter, thermal conditions of the embedded circular cylinders and solid volume fraction. Findings Overall, an increment in length of hot/cold source leads to augmentation on the temperature distributions and flow intensity inside the X-shaped cavity. The hot thermal condition of the circular cylinder augments the temperature distributions. The homogeneous porous medium slows down the flow speed in the top porous layer of the X-shaped cavity. The average Nusselt number decreases as Lh increases. Originality/value ISPH method simulated the motion of circular cylinders in the X-shaped cavity. The X-shaped cavity is saturated with a partial layer porous medium. It is found that an increase in hot source length augments the temperature and fluid flow. ISPH method can easily handle the motion of cylinders in the X-shaped cavity. Different thermal conditions of cylinders can change the temperature distributions in X-cavity.

Sign in / Sign up

Export Citation Format

Share Document