MHD natural convection and entropy analysis of a nanofluid inside T-shaped baffled enclosure

2018 ◽  
Vol 28 (12) ◽  
pp. 2916-2941 ◽  
Author(s):  
Taher Armaghani ◽  
A. Kasaeipoor ◽  
Mohsen Izadi ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Entropy Generation ◽  
Hartmann Number ◽  
Content Type ◽  
Thermal Indexes ◽  
The Impact

Purpose The purpose of this paper is to numerically study MHD natural convection and entropy generation of Al2O3-water alumina nanofluid inside of T-shaped baffled cavity which is subjected to a magnetic field. Design/methodology/approach Effect of various geometrical, fluid and flow factors such as aspect ratio of enclosure and baffle length, Rayleigh and Hartmann number of nanofluid have been considered in detail. The hydrodynamics and thermal indexes of nanofluid have been described using streamlines, isotherms and isentropic lines. Findings It is found that by enhancing Hartmann number, symmetrical streamlines gradually lose symmetry and their values decline. It is found that by enhancing Hartmann number, symmetrical streamlines gradually lose symmetry and their values decline. The interesting finding is an increase in the impact of Hartmann number on heat transfer indexes with augmenting Rayleigh number. However, with augmenting Rayleigh number and, thus, strengthening the buoyant forces, the efficacy of Hartmann number one, an index indicating the simultaneous impact of natural heat transfer to entropy generation increases. It is clearly seen that the efficacy of nanofluid on increased Nusselt number enhances with increasing aspect ratio of the enclosure. Based on the results, the Nusselt number generally enhances with the larger baffle length in the enclosure. Finally, with larger Hartmann number and lesser Nusselt one, entropy production is reduced. Originality/value The authors believe that all the results, both numerical and asymptotic, are original and have not been published elsewhere.

Natural convection heat transfer of nanofluid inside a cavity containing rough elements using lattice Boltzmann method

2019 ◽  
Vol 29 (10) ◽  
pp. 3659-3684 ◽  
Author(s):  
Rasul Mohebbi ◽  
Mohsen Izadi ◽  
Nor Azwadi Che Sidik ◽  
Gholamhassan Najafi
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Convection Heat ◽  
Nanofluid Flow ◽  
Content Type ◽  
Boltzmann Method

Purpose This paper aims to study the natural convection of a nanofluid inside a cavity which contains obstacles using lattice Boltzmann method (LBM). The results have focused mainly on various parameters such as number and aspect ratio of roughness elements and different nanoparticle volume fraction. The isotherms and streamlines are presented to describe the hydrodynamics and thermal behaviors of the nanofluid flow throughout the enclosure. Design/methodology/approach The methodology of this paper consists of mathematical model, statement of the problem, nanofluid thermophysical properties, lattice Boltzmann method, LBM for fluid flow, LBM for heat transfer, numerical strategy, boundary conditions, Nusselt (Nu) number calculation, code validation and grid independence. Findings Natural convection heat transfers of a nanofluid inside cavities with and without rough elements have been studied. Lattice Boltzmann technique has been used as numerical approach. The results showed that at higher Rayleigh number (Ra = 106), there are denser streamlines near the left (source) and right wall (sink) which results in better cooling and enhances convective heat rejection to the heat sink. After a distinctive aspect ratio of rough elements (A = 0.1), change in streamline pattern which arises from increasing of aspect ratio does not have an important effect on isotherms. Results indicate that for lower Rayleigh number (Ra = 103), no variation in average Nu is observed with increasing in number of roughness, while for higher one (Ra = 106) average Nu decreases from N = 0 (smooth cavity) up to N = 4 and then remains constant (N = 6). Originality/value Currently, no argumentative and comprehensive extraction can be concluded without fully understanding the role of different arrangement of roughness. Some geometrical parameters such as aspect ratio, number and position of rough elements have been considered. Also, the effect of nanoparticle concentration was studied at different Ra number. Briefly, using LBM, this paper aims to investigate the natural convection of a nanofluid flow on the thermal and hydrodynamics parameters in the presence of rough element with various arrangements.

scholarly journals Heat transfer augmentation of magnetohydrodynamics natural convection in L-shaped cavities utilizing nanofluids

2012 ◽  
Vol 16 (2) ◽  
pp. 489-501 ◽  
Author(s):  
Ehsan Sourtiji ◽  
Seyed Hosseinizadeh
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Flow Field ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
The Magnetic Field

A numerical study of natural convection heat transfer through an alumina-water nanofluid inside L-shaped cavities in the presence of an external magnetic field is performed. The study has been carried out for a wide range of important parame?ters such as Rayleigh number, Hartmann number, aspect ratio of the cavity and solid volume fraction of the nanofluid. The influence of the nanoparticle, buoyancy force and the magnetic field on the flow and temperature fields have been plotted and discussed. The results show that after a critical Rayleigh number depending on the aspect ratio, the heat transfer in the cavity rises abruptly due to some significant changes in flow field. It is also found that the heat transfer enhances in the presence of the nanoparticles and increases with solid volume fraction of the nanofluid. In addition, the performance of the nanofluid utilization is more effective at high Ray?leigh numbers. The influence of the magnetic field has been also studied and de?duced that it has a remarkable effect on the heat transfer and flow field in the cavity that as the Hartmann number increases the overall Nusselt number is significantly decreased specially at high Rayleigh numbers.

Hydrothermal investigation of a stratified system in enclosure with jagged surface for application in lead-acid batteries

2019 ◽  
Vol 15 (1) ◽  
pp. 283-303 ◽  
Author(s):  
Mahmoud Salari ◽  
Emad Hasani Malekshah ◽  
Mohammad Reza Sarlak ◽  
Masoud Hasani Malekshah ◽  
Mohammad Pilfoush
Keyword(s):  
Nusselt Number ◽  
Fluid Flow ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Content Type ◽  
Lead Acid Batteries ◽  
Lead Acid

Purpose The purpose of this paper is to investigate the three-dimensional natural convection and entropy generation in a cuboid enclosure filled with two immiscible fluids of nanofluid and air. Design/methodology/approach One surface of the enclosure is jagged and another one is smooth. The finite volume approach is applied for computation. There are two partially side heaters. Furthermore, the Navier–Stokes equations and entropy generation formulation are solved in the 3D form. Findings The effects of different governing parameters, such as the jagged surface (JR=0, 0.02, 0.04, 0.08, 0.12 and 0.16), Rayleigh number (103⩽Ra⩽106) and solid volume fraction of nanofluid (φ=1, 1.5, 2 vol%), on the fluid flow, temperature field, Nusselt number, volumetric entropy generation and Bejan number are presented, comprehensively. The results indicate that the average Nusselt number increases with the increase in the Rayleigh number and solid volume fraction of nanofluid. Moreover, the flow structure is significantly affected by the jagged surface. Originality/value The originality of this work is to analyze the natural-convection fluid flow and heat transfer under the influence of jagged surfaces of electrodes in high-current lead–acid batteries.

MHD heat transfer and entropy generation in inclined trapezoidal cavity filled with nanofluid

2017 ◽  
Vol 27 (10) ◽  
pp. 2174-2202 ◽  
Author(s):  
Kamel Milani Shirvan ◽  
Soroush Mirzakhanlari ◽  
Hakan F. Öztop ◽  
Mojtaba Mamourian ◽  
Khaled Al-Salem
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Sensitivity Analysis ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Entropy Generation ◽  
Inclination Angle ◽  
Effective Parameters ◽  
Content Type ◽  
The Mean

Purpose The main purpose of this paper is to define 2D numerical study and a sensitivity analysis of natural convection heat transfer and entropy generation of Al2O3-water nanofluid in a trapezoidal cavity, with considering of the presence of a constant axial magnetic field. Design/methodology/approach The effects of the three effective parameters, the Rayleigh number, Hartmann number (Ha) and also inclination angle on the heat transfer performance and entropy generation, are investigated using a finite volume approach. The sensitivity analysis of the effective parameters is done utilizing the response surface methodology. Findings The results obtained showed that the mean Nusselt number and total entropy generation increase with the Rayleigh number. Also, increasing the inclination angle reduces the mean Nusselt number (regardless of the magnetic field). In addition, it is found that the mean Nusselt number increases until Ha = 10 and then decreases by increasing of Ha number, regardless of the inclination angle. The sensitivity of the mean Nusselt number to the Ha number and inclination angle α is negative. It is concluded that to maximize the mean Nusselt number and minimize the entropy generation, simultaneously, the Ha and inclination angle must be 50° and 0°, respectively. Originality/value There is no published research in the literature about sensitivity analysis of magneto-hydrodynamic heat transfer and entropy generation in inclined trapezoidal cavity filled with nanofluid.

Effects of cavity and heat source aspect ratios on natural convection of a nanofluid in a C-shaped cavity using Lattice Boltzmann method

2018 ◽  
Vol 28 (8) ◽  
pp. 1930-1955 ◽  
Author(s):  
Mohsen Izadi ◽  
Rasul Mohebbi ◽  
A. Chamkha ◽  
Ioan Pop
Keyword(s):  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Heat Source ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Average Nusselt Number ◽  
Content Type ◽  
Boltzmann Method

PurposeThe purpose of this paper is to consider natural convection of a nanofluid inside of a C-shaped cavity using Lattice Boltzmann method (LBM).Design/methodology/approachEffects of some geometry and flow parameters consisting of the aspect ratio of the cavity, aspect ratio of the heat source; Rayleigh number (Ra = 103− 106) have been investigated. The validity of the method is checked by comparing the present results with ones from the previously published work.FindingsThe results demonstrate that for Ra = 103, the aspect ratio of the heat source has more influence on the average Nusselt number in contrast to the case of Ra = 106. Contrary to the fact that the average Nusselt number increases non-linearly more than twice because of the increase of the aspect ratio of the enclosure at Ra = 103, the average Nusselt number has a linear relation with the aspect ratio for of Ra = 106. Therefore, upon increasing the Rayleigh number, the efficiency of the aspect ratio of the cavity on the thermal convection, gradually diminishes.Originality/valueThe authors believe that all the results, both numerical and asymptotic, are original and have not been published elsewhere.

Lattice Boltzmann simulation of free convection in nanofluid filled cavity with partially active walls – entropy generation and heatline visualization

2018 ◽  
Vol 28 (10) ◽  
pp. 2254-2283 ◽  
Author(s):  
Alireza Rahimi ◽  
Abbas Kasaeipoor ◽  
Emad Hasani Malekshah ◽  
Lioua Kolsi
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Entropy Generation ◽  
Lattice Boltzmann ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Heat Transfer ◽  
Content Type ◽  
Lattice Boltzmann Simulation

Purpose This paper aims to perform the lattice Boltzmann simulation of natural convection heat transfer in cavities included with active hot and cold walls at the side walls and internal hot and cold obstacles. Design/methodology/approach The cavity is filled with double wall carbon nanotubes (DWCNTs)-water nanofluid. Different approaches such as local and total entropy generation, local and average Nusselt number and heatline visualization are used to analyze the natural convection heat transfer. The cavity is filled with DWCNTs-water nanofluid and the thermal conductivity and dynamic viscosity are measured experimentally at different solid volume fractions of 0.01 per cent, 0.02 per cent, 0.05 per cent, 0.1 per cent, 0.2 per cent and 0.5 per cent and at a temperature range of 300 to 340 (K). Findings Two sets of correlations for these parameters based on temperature and solid volume fraction are developed and used in the numerical simulations. The influences of different governing parameters such as Rayleigh number, solid volume fraction and different arrangements of active walls on the fluid flow, heat transfer and entropy generation are presented, comprehensively. It is found that the different arrangements of active walls have pronounced influence on the flow structure and heat transfer performance. Furthermore, the Nusselt number has direct relationship with Rayleigh number and solid volume fraction. On the other hand, the total entropy generation has direct and reverse relationship with Rayleigh number and solid volume fraction, respectively. Originality/value The originality of this work is to analyze the two-dimensional natural convection using lattice Boltzmann method and different approaches such as entropy generation and heatline visualization.

Unsteady natural convection with entropy generation in partially open triangular cavities with a local heat source

2017 ◽  
Vol 27 (12) ◽  
pp. 2696-2716 ◽  
Author(s):  
Hakan F. Öztop ◽  
Nadezhda S. Bondareva ◽  
Mikhail A. Sheremet ◽  
Nidal Abu-Hamdeh
Keyword(s):  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Heat Source ◽  
Entropy Generation ◽  
Average Nusselt Number ◽  
Local Heat ◽  
Dimensionless Time ◽  
Content Type ◽  
Local Heat Source

Purpose The main aim of this work is to perform a numerical analysis on natural convection with entropy generation in a partially open triangular cavity with a local heat source. Design/methodology/approach The unsteady governing dimensionless partial differential equations with corresponding initially and boundary conditions were numerically solved by the finite difference method of the second-order accuracy. The effects of dimensionless time is studied, and other governing parameters are Rayleigh number (Ra = 103 − 105), Prandtl number (Pr = 6.82), heater length (w/L = 0.2, 0.4 and 0.6) and distance of heater ratio (δ/L = 0.3). Findings An increase in the Rayleigh number leads to an increment of the fluid flow and heat transfer rates. Average Bejan number decreases with Ra as opposed to the average Nusselt number and average entropy generation. High values of Ra characterize a formation of long-duration oscillating behavior for the average Nusselt number and entropy generation. Originality/value The originality of this work is to analyze the entropy generation in natural convection in a one side open and partial heater-located cavity. This is a good application for electronical systems or building design.

Natural Convection Heat Transfer and Entropy Generation From a Horizontal Cylinder With Baffles

2000 ◽  
Vol 122 (4) ◽  
pp. 679-692 ◽  
Author(s):  
B. A/K Abu-Hijleh
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Entropy Generation ◽  
Convection Heat Transfer ◽  
Horizontal Cylinder ◽  
Natural Convection Heat Transfer ◽  
Convection Heat ◽  
Wide Range

The problem of laminar natural convection heat transfer from a horizontal cylinder with multiple, equally spaced, low conductivity baffles on its outer surface was investigated numerically. The effect of several combinations of number of baffles and baffle height on the average Nusselt number was studied over a wide range of Rayleigh numbers. The computed velocity and temperature fields were also used to calculate the local and global entropy generation for different cylinder diameters. The results showed that there was an optimal combination of a number of baffles and baffle height for minimum Nusselt number for a given value of the Rayleigh number. Short baffles slightly increased the Nusselt number at small values of the Rayleigh number. The global entropy generation increased monotonically with increasing Rayleigh number and decreased with increasing cylinder diameter, baffle height, and number of baffles. [S0022-1481(00)01203-2]

Natural Convection Heat and Mass Transfer in the Vertical Cylindrical Porous Channel Under the Effects of Time-Periodic Boundary Condition

2019 ◽  
Vol 141 (12) ◽  
Author(s):  
Hayder I. Mohammed ◽  
Donald Giddings
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Boundary Condition ◽  
Porous Medium ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Heat And Mass Transfer ◽  
Vertical Wall

Abstract Heat and mass transfer are investigated numerically with steady-state laminar natural convection through a vertical cylindrical enclosure filled with a liquid-saturated porous medium. The vertical wall is under a constant magnetic field and various durations of periodic heating boundary condition; the top and bottom surfaces are kept at a constant cold temperature. Continuity, momentum, and energy equations are transformed to dimensionless equations. The finite difference approach with the line successive over-relaxation (LSOR) method is used to obtain the computational results. This study covers the heat transfer, the temperature distribution, and the velocity field in the domain under the variation of different parameters. The code used is validated by modifying it to analyze the Nusselt number in the existing experimental literature of Izadpanah et al. (1998, “Experimental and Theoretical Studies of Convective Heat Transfer in a Cylindrical Porous Medium,” Int. J. Heat Fluid Flow, 19(6), pp. 629–635). This work shows that Nusselt number decreases (with varying gradient) as the aspect ratio increases, and that it increases as the Rayleigh number increases. The centerline temperature has a proportional relationship with the heating amplitude and the heating period (as the system receives more heat) and is inversely proportional with Rayleigh number. Increasing the Rayleigh number causes increased convective velocity, which affects the position of the hot region, and causes a decrease in the temperature field. Increasing the aspect ratio results in a warm stream at the center of the cylinder, and when the time period of the heating increases, the circulation becomes faster and the intensity of the temperature contour layers decreases. In this work, a correlation for Nu as a function of the mentioned parameters is developed.

A Computational Fluid Dynamics Investigation on the Effect of the Angular Velocities of Hot and Cold Turbulator Cylinders on the Heat Transfer Characteristics of Nanofluid Flows Within a Porous Cavity

2020 ◽  
Vol 142 (11) ◽  
Author(s):  
Yan Cao ◽  
Yu Bai ◽  
Jiang Du ◽  
Saman Rashidi
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Turbulent Flow ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Porous Cavity ◽  
Cu Nanoparticle ◽  
The Impact

Abstract In the present study, turbulent flow of a Cu-water nanofluid through a porous cavity is investigated using a numerical method. Two rotating cylinders with different temperatures are placed inside the porous enclosure to generate turbulent structures. Forced and natural convective heat transfer mechanisms are compared for different Cu nanoparticle concentrations. The natural convection within the enclosure is resulted from buoyancy forces as an effect of temperature differences among hot and cold cylindrical turbulators. To investigate the effect of the cavity geometry on the natural convection heat, the simulations are done for various Rayleigh number values. Accordingly, Rayleigh number increment provides higher Nusselt number values. However, in turbulent flow regimes, forced convection may weaken the natural convection. It is proven that for lower Reynolds numbers, the Nusselt number reaches higher values because of buoyant-driven convective heat transfer deterioration. Moreover, the angular velocity directions of both cylinders slightly affect the Nusselt number. Besides, the impact of porosity on the heat transfer rate is studied for different Darcy numbers. It is concluded that, for lower Ra numbers, as Darcy number rises, the average Nusselt number through the cavity is slightly boosted. In addition, it is shown that for cases with high Ra and Re values, Cu nanoparticle addition adversely affects the heat transfer process. At Ra = 1011, as Cu nanoparticle increases from 0 to 0.02 and 0.04, the average Nu decreases up to 17.65% and 27.48%, respectively.

Sign in / Sign up

Export Citation Format

Share Document