scholarly journals Heat transfer augmentation of magnetohydrodynamics natural convection in L-shaped cavities utilizing nanofluids

2012 ◽  
Vol 16 (2) ◽  
pp. 489-501 ◽  
Author(s):  
Ehsan Sourtiji ◽  
Seyed Hosseinizadeh
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Flow Field ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
The Magnetic Field

A numerical study of natural convection heat transfer through an alumina-water nanofluid inside L-shaped cavities in the presence of an external magnetic field is performed. The study has been carried out for a wide range of important parame?ters such as Rayleigh number, Hartmann number, aspect ratio of the cavity and solid volume fraction of the nanofluid. The influence of the nanoparticle, buoyancy force and the magnetic field on the flow and temperature fields have been plotted and discussed. The results show that after a critical Rayleigh number depending on the aspect ratio, the heat transfer in the cavity rises abruptly due to some significant changes in flow field. It is also found that the heat transfer enhances in the presence of the nanoparticles and increases with solid volume fraction of the nanofluid. In addition, the performance of the nanofluid utilization is more effective at high Ray?leigh numbers. The influence of the magnetic field has been also studied and de?duced that it has a remarkable effect on the heat transfer and flow field in the cavity that as the Hartmann number increases the overall Nusselt number is significantly decreased specially at high Rayleigh numbers.

Lattice Boltzmann Simulation of Magnetic Field Effect on Natural Convection of Power-Law Nanofluids in Rectangular Enclosures

2017 ◽  
Vol 9 (5) ◽  
pp. 1094-1110
Author(s):  
Lei Wang ◽  
Zhenhua Chai ◽  
Baochang Shi
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Power Law ◽  
Lattice Boltzmann ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Power Law Index

AbstractIn this paper, the magnetic field effects on natural convection of power-law nanofluids in rectangular enclosures are investigated numerically with the lattice Boltzmann method. The fluid in the cavity is a water-based nanofluid containing Cu nanoparticles and the investigations are carried out for different governing parameters including Hartmann number (0.0≤Ha≤20.0), Rayleigh number (104≤Ra≤106), power-law index (0.5≤n≤1.0), nanopartical volume fraction (0.0≤ϕ≤0.1) and aspect ratio (0.125≤AR≤8.0). The results reveal that the flow oscillations can be suppressed effectively by imposing an external magnetic field and the augmentation of Hartmann number and power-law index generally decreases the heat transfer rate. Additionally, it is observed that the average Nusselt number is increased with the increase of Rayleigh number and nanoparticle volume fraction. Moreover, the present results also indicate that there is a critical value for aspect ratio at which the impact on heat transfer is the most pronounced.

Effects of uniform or non-uniform heating at bottom wall on MHD mixed convection in a porous cavity saturated by nanofluid

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Subramanian Muthukumar ◽  
Selvaraj Sureshkumar ◽  
Arthanari Malleswaran ◽  
Murugan Muthtamilselvan ◽  
Eswari Prem
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Transfer Rate ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Darcy Number ◽  
Bottom Wall ◽  
Uniform Heating ◽  
The Magnetic Field

Abstract A numerical investigation on the effects of uniform and non-uniform heating of bottom wall on mixed convective heat transfer in a square porous chamber filled with nanofluid in the appearance of magnetic field is carried out. Uniform or sinusoidal heat source is fixed at the bottom wall. The top wall moves in either positive or negative direction with a constant cold temperature. The vertical sidewalls are thermally insulated. The finite volume approach based on SIMPLE algorithm is followed for solving the governing equations. The different parameters connected with this study are Richardson number (0.01 ≤ Ri ≤ 100), Darcy number (10−4 ≤ Da ≤ 10−1), Hartmann number (0 ≤ Ha ≤ 70), and the solid volume fraction (0.00 ≤ χ ≤ 0.06). The results are presented graphically in the form of isotherms, streamlines, mid-plane velocities, and Nusselt numbers for the various combinations of the considered parameters. It is observed that the overall heat transfer rate is low at Ri = 100 in the positive direction of lid movement, whereas it is low at Ri = 1 in the negative direction. The average Nusselt number is lowered on growing Hartmann number for all considered moving directions of top wall with non-uniform heating. The low permeability, Da = 10−4 keeps the flow pattern same dominating the magnetic field, whereas magnetic field strongly affects the flow pattern dominating the high Darcy number Da = 10−1. The heat transfer rate increases on enhancing the solid volume fraction regardless of the magnetic field.

scholarly journals Hydrothermal and Entropy Investigation of Ag/MgO/H2O Hybrid Nanofluid Natural Convection in a Novel Shape of Porous Cavity

2021 ◽  
Vol 11 (4) ◽  
pp. 1722
Author(s):  
Nidal Abu-Libdeh ◽  
Fares Redouane ◽  
Abderrahmane Aissa ◽  
Fateh Mebarek-Oudina ◽  
Ahmad Almuhtady ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Hybrid Nanofluid ◽  
The Finite Element Method ◽  
Governing Equations ◽  
Nanofluid Flow ◽  
The Magnetic Field

In this study, a new cavity form filled under a constant magnetic field by Ag/MgO/H2O nanofluids and porous media consistent with natural convection and total entropy is examined. The nanofluid flow is considered to be laminar and incompressible, while the advection inertia effect in the porous layer is taken into account by adopting the Darcy–Forchheimer model. The problem is explained in the dimensionless form of the governing equations and solved by the finite element method. The results of the values of Darcy (Da), Hartmann (Ha) and Rayleigh (Ra) numbers, porosity (εp), and the properties of solid volume fraction (ϕ) and flow fields were studied. The findings show that with each improvement in the Ha number, the heat transfer rate becomes more limited, and thus the magnetic field can be used as an outstanding heat transfer controller.

Natural Convection in a Square Cavity Utilizing Different Nanofluids in Presence of Constant Magnetic Field With Brownian Motion Effect

2018 ◽  
Author(s):  
Misarah Abdelaziz ◽  
Wael El-Maghlany ◽  
Ashraf S. Ismail
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Brownian Motion ◽  
Rayleigh Number ◽  
Transfer Rate ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Heat Sources ◽  
Square Cavity

Natural convection in a square cavity filled with water-Al2 O3 nanofluid is studied numerically. Upper, lower, and left surfaces are insulated. Right wall is at low temperature, while two heat sources are kept at high temperature. The sources are vertically attached to the horizontal walls of a cavity . A uniform magnetic field is applied in a horizontal direction. Effective thermal conductivity and viscosity of nanofluids are obtained using Koo-Kleinstreuer model which implements the Brownian motion of nanoparticles effect. Steady state laminar regime is assumed. The conservation of mass, momentum, and energy equations are solved using finite volume method. The numerical results are reported for the effect of Rayleigh number, solid volume fraction, and Hartmann number on the streamlines as well as the isotherms. In addition, the results for average Nusselt number are presented for various parametric conditions. This study is presented in the following ranges, Rayleigh number from 103 to 105, Hartmann number from 0 to 60, and solid volume fraction from 0 to 0.06, while the Prandtl number which represents water is kept constant at 6.2. The results showed that heat transfer rate decreases with the rise of Hartmann number and increases with the rise of Rayleigh number, and volume fraction. Moreover, results showed that heat sources positions, lengths and intensities have crucial effect on heat transfer rate. Additionally, the effect of nanofluids type was studied, it was found that water-Cu nanofluid enhances the heat transfer better than water-Al2O3, water-CuO and water-TiO2 nanofluids.

scholarly journals Turbulent natural convection heat transfer in a square cavity with nanofluids in presence of inclined magnetic field

2021 ◽  
pp. 326-326
Author(s):  
Mohamed El Hattab ◽  
Zakaria Lafdaili
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Orientation Angle ◽  
Inclined Magnetic Field ◽  
Square Cavity ◽  
Turbulent Natural Convection

In this paper, we present a numerical study of turbulent natural convection in a square cavity differentially heated and filled with nanofluid and subjected to an inclined magnetic field. The standard k-? model was used as the turbulence model. The transport equations were discretized by the finite volume method using the SIMPLE algorithm. The influence of the Rayleigh number, the Hartmann number, the orientation angle of the applied magnetic field, the type of nanoparticles as well as the volume fraction of nanoparticles, on the hydrodynamic and thermal characteristics of the nanofluid was illustrated and discussed in terms of streamlines, isotherms and mean Nusselt number. The results obtained show that the heat transfer rate increases with increasing Rayleigh number and orientation angle of the magnetic field but it decreases with increasing Hartmann number. In addition, heat transfer improves with increasing volume fraction and with the use of Al2O3 nanoparticles.

scholarly journals CuO–Water Nanofluid Magnetohydrodynamic Natural Convection inside a Sinusoidal Annulus in Presence of Melting Heat Transfer

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
M. Sheikholeslami ◽  
R. Ellahi ◽  
C. Fetecau
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Melting Heat ◽  
Melting Heat Transfer ◽  
Limiting Case ◽  
Good Agreement ◽  
Melting Parameter

Impact of nanofluid natural convection due to magnetic field in existence of melting heat transfer is simulated using CVFEM in this research. KKL model is taken into account to obtain properties of CuO–H2O nanofluid. Roles of melting parameter (δ), CuO–H2O volume fraction (ϕ), Hartmann number (Ha), and Rayleigh (Ra) number are depicted in outputs. Results depict that temperature gradient improves with rise of Rayleigh number and melting parameter. Nusselt number detracts with rise of Ha. At the end, a comparison as a limiting case of the considered problem with the existing studies is made and found in good agreement.

Influence of Cu-Water and CNT-Water Nanofluid on Natural Convection Heat Transfer in a Triangular Solar Collector

2020 ◽  
Author(s):  
Didarul Ahasan Redwan ◽  
Md. Habibur Rahman ◽  
Hasib Ahmed Prince ◽  
Emdadul Haque Chowdhury ◽  
M. Ruhul Amin
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Solar Collector ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Heat Transfer ◽  
Natural Convection Heat Transfer ◽  
Convection Heat

Abstract A numerical study on natural convection heat transfer in a right triangular solar collector filled with CNT-water and Cuwater nanofluids has been conducted. The inclined wall and the bottom wall of the cavity are maintained at a relatively lower temperature (Tc), and higher temperature (Th), respectively, whereas the vertical wall, is kept adiabatic. The governing non-dimensional partial differential equations are solved by using the Galerkin weighted residual finite element method. The Rayleigh number (Ra) and the solid volume-fraction of nanoparticles (ϕ) are varied in the range of 103 ≤ Ra ≤ 106, and 0 ≤ ϕ ≤ 0.1, respectively, to carry out the parametric simulations within the laminar region. Corresponding thermal and flow fields are presented via isotherms and streamlines. Variations of average Nusselt number as a function of Rayleigh number have been examined for different solid volume-fraction of nanoparticles. It has been found that the natural convection heat transfer becomes stronger with the increment of solid volume fraction and Rayleigh number, but the strength of circulation reduces with increasing nanoparticles’ concentration at low Ra. Conduction mode dominates for lower Ra up to a certain limit of 104. It is also observed that when the solid volume fraction is increased from 0 to 0.1 for a particular Rayleigh number, the average Nusselt number is increased to a great extent, but surprisingly, the rate of increment is more pronounced at lower Ra. Moreover, it is seen that Cu-water nanofluid offers slightly better performance compared to CNT-water but the difference is very little, especially at lower Ra.

scholarly journals Effects of circular corners and aspect-ratio on entropy generation due to natural convection of nanofluid flows in rectangular cavities

2015 ◽  
Vol 19 (5) ◽  
pp. 1621-1632 ◽  
Author(s):  
Mahmoud Salari ◽  
Ali Mohammadtabar ◽  
Mohammad Mohammadtabar
Keyword(s):  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Bejan Number ◽  
Total Entropy ◽  
Aspect Ratios ◽  
Corner Radius

In this paper, entropy generation induced by natural convection of cu-water nanofluid in rectangular cavities with different circular corners and different aspect-ratios were numerically investigated. The governing equations were solved using a finite volume approach and the SIMPLE algorithm was used to couple the pressure and velocity fields. The results showed that the total entropy generation increased with the increase of Rayleigh number, irreversibility coefficient, aspect ratio or solid volume fraction while it decreased with the increase of the corner radius. It should be noted that the best way for minimizing entropy generation is decreasing Rayleigh number. This is the first priority for minimizing entropy generation. The other parameters such as radius, volume fraction, etc are placed on the second priority. However, Bejan number had an inverse trend compared with total entropy generation. As an exception, Bejan number and total entropy number had the same trend whenever solid volume fraction increased. Moreover, Nusselt number increased as Rayleigh number, solid volume fraction or aspect ratio increased whereas it decreases with the increase of corner radius.

A Differential Quadrature Solution of MHD Natural Convection in an Inclined Enclosure With a Partition

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Kamil Kahveci ◽  
Semiha Öztuna
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Inclination Angle ◽  
Hartmann Number ◽  
Differential Quadrature ◽  
Flow And Heat Transfer ◽  
Inclined Enclosure ◽  
Vorticity Generation

Magnetohydrodynamics natural convection in an inclined enclosure with a partition is studied numerically using a differential quadrature method. Governing equations for the fluid flow and heat transfer are solved for the Rayleigh number varying from 104 to 106, the Prandtl numbers (0.1, 1, and 10), four different Hartmann numbers (0, 25, 50, and 100), the inclination angle ranging from 0degto90deg, and the magnetic field with the x and y directions. The results show that the convective flow weakens considerably with increasing magnetic field strength, and the x-directional magnetic field is more effective in reducing the convection intensity. As the inclination angle increases, multicellular flows begin to develop on both sides of the enclosure for higher values of the Hartmann number if the enclosure is under the x-directional magnetic field. The vorticity generation intensity increases with increase of Rayleigh number. On the other hand, increasing Hartmann number has a negative effect on vorticity generation. With an increase in the inclination angle, the intensity of vorticity generation is observed to shift to top left corners and bottom right corners. Vorticity generation loops in each region of enclosure form due to multicelluar flow for an x-directional magnetic field when the inclination angle is increased further. In addition, depending on the boundary layer developed, the vorticity value on the hot wall increases first sharply with increasing y and then begins to decrease gradually. For the high Rayleigh numbers, the average Nusselt number shows an increasing trend as the inclination angle increases and a peak value is detected. Beyond the peak point, the foregoing trend reverses to decrease with the further increase of the inclination angle. The results also show that the Prandtl number has only a marginal effect on the flow and heat transfer.

MHD natural convection and entropy analysis of a nanofluid inside T-shaped baffled enclosure

2018 ◽  
Vol 28 (12) ◽  
pp. 2916-2941 ◽  
Author(s):  
Taher Armaghani ◽  
A. Kasaeipoor ◽  
Mohsen Izadi ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Entropy Generation ◽  
Hartmann Number ◽  
Content Type ◽  
Thermal Indexes ◽  
The Impact

Purpose The purpose of this paper is to numerically study MHD natural convection and entropy generation of Al2O3-water alumina nanofluid inside of T-shaped baffled cavity which is subjected to a magnetic field. Design/methodology/approach Effect of various geometrical, fluid and flow factors such as aspect ratio of enclosure and baffle length, Rayleigh and Hartmann number of nanofluid have been considered in detail. The hydrodynamics and thermal indexes of nanofluid have been described using streamlines, isotherms and isentropic lines. Findings It is found that by enhancing Hartmann number, symmetrical streamlines gradually lose symmetry and their values decline. It is found that by enhancing Hartmann number, symmetrical streamlines gradually lose symmetry and their values decline. The interesting finding is an increase in the impact of Hartmann number on heat transfer indexes with augmenting Rayleigh number. However, with augmenting Rayleigh number and, thus, strengthening the buoyant forces, the efficacy of Hartmann number one, an index indicating the simultaneous impact of natural heat transfer to entropy generation increases. It is clearly seen that the efficacy of nanofluid on increased Nusselt number enhances with increasing aspect ratio of the enclosure. Based on the results, the Nusselt number generally enhances with the larger baffle length in the enclosure. Finally, with larger Hartmann number and lesser Nusselt one, entropy production is reduced. Originality/value The authors believe that all the results, both numerical and asymptotic, are original and have not been published elsewhere.

Sign in / Sign up

Export Citation Format

Share Document