Entropy generation in MHD free convection of nanoliquid within a square open chamber with a solid body

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sivaraj Chinnasamy ◽  
Vignesh E. ◽  
Mikhail Sheremet
Keyword(s):  
Entropy Production ◽  
Entropy Generation ◽  
Solid Body ◽  
Thermal Convection ◽  
Energy Transport ◽  
Entropy Generation Rate ◽  
Liquid Motion ◽  
Content Type ◽  
Aspect Ratios ◽  
Solid Block

Purpose The study aims to investigate magnetohydrodynamics thermal convection energy transference and entropy production in an open chamber saturated with ferrofluid having an isothermal solid block. Design/methodology/approach Analysis of thermal convection phenomenon was performed for an open chamber saturated with a nanofluid having an isothermal solid unit placed inside the cavity with various aspect ratios. The left border temperature is kept at Tc. An external cooled nanofluid of fixed temperature Tc penetrates into the domain from the right open border. The nanofluid circulation is Newtonian, incompressible, and laminar. The uniform magnetic field of strength B at the tilted angle of γ is applied. The finite volume technique is used to work out the non-linear equations of liquid motion and energy transport. For Rayleigh number (Ra=1e+7), numerical simulations were executed for varying the solid volume fractions of the nanofluid (ϕ = 0.01–0.04), the aspect ratios of a solid body (As = 0.25–4), the Hartmann number (Ha = 0–100), the magnetic influence inclination angle (γ = 0–π/2) and the non-dimensional temperature drop (Ω = 0.001–0.1) on the liquid motion, heat transference and entropy production. Findings Numerical outcomes are demonstrated by using isolines of temperature and stream function, profiles of mean Nusselt number and entropy generations. The results indicate that the entropy generation rate and mean Nu can be decreased with an increase in Ha. The inner solid block of As = 0.25 reflects the maximum heat transfer rate in comparison with other considered blocks. The addition of nano-sized particles results in a growth of energy transport and mean entropy generations. Originality/value An efficient computational technique has been developed to solve natural convection problem for an open chamber. The originality of this research is to scrutinize the convective transport and entropy production in an open domain with inner body. The outcomes would benefit scientists and engineers to become familiar with the investigation of convective energy transference and entropy generation in open chambers with inner bodies, and the way to predict the energy transference strength in the advanced engineering systems.

Thermal convection and entropy generation of ferrofluid in an enclosure containing a solid body

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sivaraj Chinnasamy ◽  
S. Priyadharsini ◽  
Mikhail Sheremet
Keyword(s):  
Heat Transfer ◽  
Aspect Ratio ◽  
Entropy Production ◽  
Entropy Generation ◽  
Solid Body ◽  
Thermal Convection ◽  
Energy Transport ◽  
Content Type ◽  
Solid Block ◽  
Irreversibility Ratio

Purpose This study/paper aims to deal with thermal convection and entropy production of a ferrofluid in an enclosure having an isothermally warmed solid body placed inside. It should be noted that this research deals with a development of passive cooling system for the electronic devices. Design/methodology/approach The domain of interest is a square chamber of size L including a rectangular solid block of sizes l1 and l2. Thermal convection of ferrofluid (water–Fe3O4 nanosuspension) is analyzed within this enclosure. The solid body is considered to be isothermal with temperature Th and also its area is L2/9. The vertical borders are cold with temperature Tc and the horizontal boundaries are adiabatic. The flow driven by temperature gradient in the cavity is two-dimensional. The governing equations, formulated in dimensionless primitive variables with corresponding initial and boundary conditions, are worked out by using the finite volume technique with the semi-implicit method for pressure-linked equations algorithm on a uniformly staggered mesh. The influence of nanoparticles volume fraction, aspect ratio of the solid block and an irreversibility ratio on energy transport and flow patterns are examined for the Rayleigh number Ra = 107. Findings The results show that the nanoparticles concentration augments the thermal transmission and the entropy production increases also, while the augmentation of temperature difference results in a diminution of entropy production. Finally, lower aspect ratio has the significant impact on heat transfer, isotherms, streamlines and entropy. Originality/value An efficient numerical technique has been developed to solve this problem. The originality of this work is to analyze convective energy transport and entropy generation in a chamber with internal block. To the best of the authors’ knowledge, the effects of irreversibility ratio are scrutinized for the first time. The results would benefit scientists and engineers to become familiar with the analysis of convective heat transfer and entropy production in enclosures with internal isothermal blocks, and the way to predict the heat transfer rate in advanced technical systems, in industrial sectors including transportation, power generation, chemical sectors, electronics, etc.

MHD and nonlinear thermal radiation effects on hybrid nanofluid past a wedge with heat source and entropy generation

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Fazle Mabood ◽  
Anum Shafiq ◽  
Waqar Ahmed Khan ◽  
Irfan Anjum Badruddin
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Heat Source ◽  
Thermal Radiation ◽  
Entropy Generation ◽  
Entropy Generation Rate ◽  
Design Parameters ◽  
Hybrid Nanofluid ◽  
Nonlinear Thermal Radiation ◽  
Content Type

Purpose This study aims to investigate the irreversibility associated with the Fe3O4–Co/kerosene hybrid-nanofluid past a wedge with nonlinear radiation and heat source. Design/methodology/approach This study reports the numerical analysis of the hybrid nanofluid model under the implications of the heat source and magnetic field over a static and moving wedge with slips. The second law of thermodynamics is applied with nonlinear thermal radiation. The system that comprises differential equations of partial derivatives is remodeled into the system of differential equations via similarity transformations and then solved through the Runge–Kutta–Fehlberg with shooting technique. The physical parameters, which emerges from the derived system, are discussed in graphical formats. Excellent proficiency in the numerical process is analyzed by comparing the results with available literature in limiting scenarios. Findings The significant outcomes of the current investigation are that the velocity field uplifts for higher velocity slip and magnetic strength. Further, the heat transfer rate is reduced with the incremental values of the Eckert number, while it uplifts with thermal slip and radiation parameters. An increase in Brinkmann’s number uplifts the entropy generation rate, while that peters out the Bejan number. The results of this study are of importance involving in the assessment of the effect of some important design parameters on heat transfer and, consequently, on the optimization of industrial processes. Originality/value This study is original work that reports the hybrid nanofluid model of Fe3O4–Co/kerosene.

scholarly journals Effect of corrugated minichannel variable width on entropy generation for convective heat transfer of alpha-Alumina-water nanofluid

2021 ◽  
Vol 2053 (1) ◽  
pp. 012016
Author(s):  
N M Muhammad ◽  
N A C Sidik ◽  
A Saat ◽  
Y Asako ◽  
W M A A Japar ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Entropy Production ◽  
Convective Heat ◽  
Entropy Generation ◽  
Entropy Generation Rate ◽  
Thermal Systems ◽  
Volume Fractions ◽  
Thermal Entropy ◽  
Alpha Alumina

Abstract Energy management and sustainability in thermal systems require maximum utilization of resources with minimal losses. However, it is rarely unattainable due to the ever-increasing need for a high-performance system combined with device size reduction. The numerical study examined convective heat transfer of an alpha-Alumina-water nanofluid in variable-width corrugated minichannel heat sinks. The objective is to study the impact of nanoparticle volume fractions and flow area variation on the entropy generation rate. The determining variables are 0.005 – 0.02 volume fractions, the fluid velocity 3 – 5.5 m/s and heat flux of 85 W/cm2. The numerical results show an acceptable correlation with the experiment results. The results indicate the thermal entropy production drop with an increase in nanoparticles volume fraction. Contrastingly, the frictional resistance entropy suggests the opposite trend due to the turbulence effect on the fluid viscosity. The induction of Alumina-Water nanofluid with enhanced thermal conductivity declined the entropy generation rate compared to water alone. The increase in width ratio by 16% between the cases translates to at least a 9% increase in thermal entropy production. The outcome of this study can provide designers and operators of thermal systems more insight into entropy management in corrugated heatsinks.

Entropy generation and second law analysis of pulsed impinging jet

2015 ◽  
Vol 25 (5) ◽  
pp. 1089-1106 ◽  
Author(s):  
Kazem Esmailpour ◽  
Behnam Bozorgmehr ◽  
Seyed Mostafa Hosseinalipour ◽  
Arun S. Mujumdar
Keyword(s):  
Heat Transfer ◽  
Temperature Field ◽  
Entropy Generation ◽  
Impinging Jet ◽  
Entropy Generation Rate ◽  
Second Law ◽  
Pulsation Frequency ◽  
Content Type ◽  
Thermal Entropy ◽  
Plate Distance

Purpose – The purpose of this paper is to examine entropy generation rate in the flow and temperature field due pulsed impinging jet on to a flat plate. Heat transfer of pulsed impinging jets has been investigated by many researchers. Entropy generation is one of the parameters related to the second law of thermodynamics which must be analyzed in processes with heat transfer and fluid flow in order to design efficient systems. Effect of velocity profile parameters and various nozzle to plate distances on viscous and thermal entropy generation are investigated. Design/methodology/approach – In this study, the flow and temperature field of a pulsed turbulent impinging jet are simulated numerically by the finite volume method with appropriate boundary conditions. Then, flow and temperature results are used to calculate the rate of entropy generation due to heat transfer and viscous dissipation. Findings – Results show that maximum viscous and thermal entropy generation occurs in the lowest nozzle to plate distance and entropy generation decreases as the nozzle to plate distance increases. Entropy generation in the two early phase of a period in the most frequencies is more than steady state whereas a completely opposite behavior happens in the two latter phase. Increase in the pulsation frequency and amplitude leads to enhancement in entropy generation because of larger temperature and velocity gradients. This phenomenon appears second and even third peaks in entropy generation plots in higher pulsation frequency and amplitude. Research limitations/implications – The predictions may be extended to include various pulsation signal shape, multiple jet configuration, the radiation effect and phase difference between jets. Practical implications – The results of this paper are a valuable source of information for active control of transport phenomena in impinging jet configurations which is used in different industrial applications such as cooling, heating and drying processes. Originality/value – In this paper the entropy generation of pulsed impinging jet was studied for the first time and a comprehensive discussion on numerical results is provided.

Thermodynamic Merger of Fluctuation Theorem and Principle of Least Action: Case of Rayleigh–Taylor Instability

2019 ◽  
Vol 44 (4) ◽  
pp. 363-371
Author(s):  
Shripad P. Mahulikar ◽  
Tapan K. Sengupta ◽  
Nidhi Sharma ◽  
Pallavi Rastogi
Keyword(s):  
Entropy Production ◽  
Entropy Generation ◽  
Dissipative System ◽  
Fluctuation Theorem ◽  
Generation Rate ◽  
Dissipative Systems ◽  
Entropy Generation Rate ◽  
Least Action ◽  
Principle Of Least Action

AbstractEntropy fluctuations with time occur in finite-sized time-evolving dissipative systems. There is a need to comprehend the role of these fluctuations on the fluctuations-averaged entropy generation rate, over a large enough observation time interval. In this non-equilibrium thermodynamic investigation, the Fluctuation Theorem (FT) and Principle of Least Action are re-visited to articulate their implications for dissipative systems. The Principle of Maximum Entropy Production (MaxEP: the entropy generation rate of a dissipative system is maximized by paths of least action) is conceptually identified as the Principle of Least Action for dissipative systems. A Thermodynamic Fusion Theorem that merges the FT and the MaxEP is introduced for addressing the role of fluctuations in entropy production. It identifies “entropy fluctuations” as the “least-action path” for maximizing the time-averaged entropy production in a dissipative system. The validity of this introduced theorem is demonstrated for the case of entropy fluctuations in Rayleigh–Taylor flow instability.

Modeling heat transfer of nanofluid flow in microchannels with electrokinetic and slippery effects using Buongiorno’s model

2019 ◽  
Vol 29 (8) ◽  
pp. 2566-2587 ◽  
Author(s):  
Hang Xu ◽  
Huang Huang ◽  
Xiao-Hang Xu ◽  
Qiang Sun
Keyword(s):  
Heat Transfer ◽  
Entropy Generation ◽  
Slip Length ◽  
Generation Rate ◽  
Entropy Generation Rate ◽  
Lower Wall ◽  
Volumetric Concentration ◽  
Nanofluid Flow ◽  
Cross Sectional ◽  
Content Type

PurposeThis paper aims to study the heat transfer of nanofluid flow driven by the move of channel walls in a microchannel under the effects of the electrical double layer and slippery properties of channel walls. The distributions of velocity, temperature and nanoparticle volumetric concentration are analyzed under different slip-length. Also, the variation rates of flow velocity, temperature, concentration of nanoparticle, the pressure constant, the local volumetric entropy generation rate and the total cross-sectional entropy generation are analyzed.Design/methodology/approachA recently developed model is chosen which is robust and reasonable from the point of view of physics, as it does not impose nonphysical boundary conditions, for instance, the zero electrical potential in the middle plane of the channel or the artificial pressure constant. The governing equations of flow motion, energy, electrical double layer and stream potential are derived with slip boundary condition presented. The model is non-dimensionalized and solved by using the homotopy analysis method.FindingsSlip-length has significant influences on the velocity, temperature and nanoparticle volumetric concentration of the nanofluid. It also has strong effects on the pressure constant. With the increase of the slip-length, the pressure constant of the nanofluid in the horizontal microchannel decreases. Both the local volumetric entropy generation rate and total cross-sectional entropy generation rate are significantly affected by both the slip-length of the lower wall and the thermal diffusion. The local volumetric entropy generation rate at the upper wall is always higher than that around the lower wall. Also, the larger the slip-length is, the lower the total cross-sectional entropy generation rate is when the thermal diffusion is moderate.Originality/valueThe findings in this work on the heat transfer and flow phenomena of the nanofluid in microchannel are expected to make a contribution to guide the design of micro-electro-mechanical systems.

scholarly journals Time Evolution Features of Entropy Generation Rate in Turbulent Rayleigh-Bénard Convection with Mixed Insulating and Conducting Boundary Conditions

Entropy ◽  
2020 ◽  
Vol 22 (6) ◽  
pp. 672
Author(s):  
Yikun Wei ◽  
Pingping Shen ◽  
Zhengdao Wang ◽  
Hong Liang ◽  
Yuehong Qian
Keyword(s):  
Energy Transfer ◽  
Kinetic Energy ◽  
Boundary Conditions ◽  
Time Evolution ◽  
Entropy Generation ◽  
Thermal Convection ◽  
Entropy Generation Rate ◽  
Total Entropy ◽  
Wide Range ◽  
Rayleigh Benard

Time evolution features of kinetic and thermal entropy generation rates in turbulent Rayleigh-Bénard (RB) convection with mixed insulating and conducting boundary conditions at Ra = 109 are numerically investigated using the lattice Boltzmann method. The state of flow gradually develops from laminar flow to full turbulent thermal convection motion, and further evolves from full turbulent thermal convection to dissipation flow in the process of turbulent energy transfer. It was seen that the viscous, thermal, and total entropy generation rates gradually increase in wide range of t/τ < 32 with temporal evolution. However, the viscous, thermal, and total entropy generation rates evidently decrease at time t/τ = 64 compared to that of early time. The probability density function distributions, spatial-temporal features of the viscous, thermal, and total entropy generation rates in the closed system provide significant physical insight into the process of the energy injection, the kinetic energy, the kinetic energy transfer, the thermal energy transfer, the viscous dissipated flow and thermal dissipation.

Entropy generation and thermo-diffusion effects on unsteady chemically reactive slip flow between two rotating disks

2019 ◽  
Vol 29 (10) ◽  
pp. 3795-3821
Author(s):  
Sumaira Qayyum ◽  
Muhammad Ijaz Khan ◽  
Tasawar Hayat ◽  
Ahmed Alsaedi
Keyword(s):  
Magnetic Field ◽  
Entropy Generation ◽  
Stokes Equations ◽  
Tangential Velocity ◽  
Generation Rate ◽  
Entropy Generation Rate ◽  
Bejan Number ◽  
Thermal Equation ◽  
Content Type ◽  
Flow Variables

Purpose The purpose of this study is to analyze the Entropy generation analysis and heat transport in three-dimensional flow between two stretchable disks. Joule heating and heat generation/absorption are incorporated in the thermal equation. Thermo-diffusion effect is also considered. Flow is conducting for time-dependent applied magnetic field. Induced magnetic field is not taken into consideration. Velocity and thermal slip conditions at both the disks are implemented. The flow problem is modeled by using Navier–Stokes equations with entropy generation rate and Bejan number. Design/methodology/approach Von Karman transformations are used to reduce the nonlinear governing expressions into an ordinary one and then tackled by homotopy analysis method for convergent series solutions. The nonlinear expressions for total entropy generation rate are obtained with appropriate transformations. The impacts of different flow variables on velocity, temperature, entropy generation rate and Bejan number are described graphically. Velocity, temperature and concentration gradients are discussed in the presence of flow variables. Findings Axial, radial and tangential velocity profiles show decreasing trend for larger values of velocity slip parameters. For a larger Brinkman number, the entropy generation increases, while a decreasing trend is noticed for Bejan number. Originality/value To the best of the authors’ knowledge, no such analyses have been reported in the literature.

Entropy generation in radiative flow of Ree-Eyring fluid due to due rotating disks

2019 ◽  
Vol 29 (6) ◽  
pp. 2057-2079 ◽  
Author(s):  
Muhammad Ijaz Khan ◽  
Sohail Ahmad Khan ◽  
Tasawar Hayat ◽  
Muhammad Faisal Javed ◽  
Ahmed Alsaedi
Keyword(s):  
Heat Transfer ◽  
Entropy Generation ◽  
Magnetic Parameter ◽  
Nonlinear Flow ◽  
Generation Rate ◽  
Entropy Generation Rate ◽  
Bejan Number ◽  
Rotating Disks ◽  
Content Type ◽  
The Impact

Purpose This study aims to examine the flow characteristics of Ree–Eyring fluid between two rotating disks. The characteristics of heat transfer are discussed in presence of viscous dissipation, heat source/sink and nonlinear radiative heat flux. Design/methodology/approach Nonlinear flow expressions lead to ordinary ones through adequate similarity transformations. The ordinary differential system has been tackled through optimal homotopic method. The impact of different flow variables on the velocity field, entropy generation rate and temperature fields is graphically discussed. The surface drag force and heat transfer rate are numerically examined via various pertinent parameters. Findings By minimization of values of stretching parameter and Brinkman number, the entropy generation rate can be controlled. The entropy generation rate enhances for higher values of magnetic parameter, while the Bejan number is decreased via magnetic parameter. Originality/value No such work is yet published in the literature.

Computational analysis of nanofluid and hybrid nanofluid in Darcy’s squeezing flow with entropy optimization

2019 ◽  
Vol 29 (9) ◽  
pp. 3394-3416 ◽  
Author(s):  
Muhammad Ijaz Khan ◽  
Ahmed Alsaedi ◽  
Salman Ahmad ◽  
Tasawar Hayat
Keyword(s):  
Skin Friction ◽  
Entropy Generation ◽  
Variable Temperature ◽  
Entropy Generation Rate ◽  
Squeezing Flow ◽  
Hybrid Nanofluid ◽  
Bejan Number ◽  
Porous Space ◽  
Suction Parameter ◽  
Content Type

Purpose This paper aims to examine squeezing flow of hybrid nanofluid inside the two parallel rotating sheets. The upper sheet squeezes downward, whereas the lower sheet stretches. Darcy’s relation describes porous space. Hybrid nanofluid consists of copper (Cu) and titanium oxide (TiO2) nanoparticles and water (H2O). Viscous dissipation and thermal radiation in modeling are entertained. Entropy generation analysis is examined. Design/methodology/approach Transformation procedure is implemented for conversion of partial differential systems into an ordinary one. The shooting scheme computes numerical solution. Findings Velocity, temperature, Bejan number, entropy generation rate, skin friction and Nusselt number are discussed. Key results are mentioned. Velocity field increases vs higher estimations of squeezing parameter, while it declines via larger porosity variable. Temperature of liquid particles enhances vs larger Eckert number. It is also examined that temperature field dominates for TiO2-H2O, Cu-H2O and Cu-TiO2-H2O. Magnitude of heat transfer rate and skin friction coefficient increase against higher squeezing parameter, radiative parameter, porosity variable and suction parameter. Originality/value The originality of this paper is investigation of three-dimensional time-dependent squeezing flow of hybrid nanomaterial between two parallel sheets. To the best of the authors’ knowledge, no such consideration has been carried out in the literature.

Sign in / Sign up

Export Citation Format

Share Document