A new two-step adaptive direct slicing approach for bio-scaffolds in tissue engineering

2017 ◽  
Vol 23 (6) ◽  
pp. 1170-1184 ◽  
Author(s):  
Wangyu Liu ◽  
Mingke Li
Keyword(s):  
Tissue Engineering ◽  
Free Form ◽  
Exterior Surface ◽  
Content Type ◽  
Direct Slicing ◽  
Pore Architecture ◽  
Free Form Surface ◽  
Adaptive Direct Slicing ◽  
Internal Pore ◽  
Internal Architecture

Purpose This paper aims to propose the new two-step adaptive direct slicing method for building bio-scaffold with digital micro-mirror device (DMD)-based MPμSLA systems. Design/methodology/approach In this paper, the authors proposed a new approach to directly slice a scaffold’s CAD model (i.e the three-dimensional model built by computer-aided design platforms) and save the slices’ data as BMP (bitmap, i.e. the data format used in DMD) files instead of other types of two-dimensional patterns as an intermediary. The proposed two-step strategy in this paper, i.e. a CAD model’s exterior surface and internal architecture were sliced, respectively, at first, and then assembled together to obtain one intact slice. The assembly process is much easier and convenient based on the slice data in BMP format. To achieve the adaptive slicing for both the exterior part and internal part, two new indices, the exterior surface-dominated index and internal architecture-dominated index, are, respectively, utilized as the error estimation indices. The proposed approach in this paper is developed on SolidWorks platform, but it can also be implemented on other platforms. Findings The authors found that the approach is not only more accurate but also more efficient by avoiding the repeated running of those inefficient rasterization programs. The approach is able to save computer resource and time, and enhance the robustness of slicing program, as well as is appropriate for the scaffolds’ model with internal pore architecture and external free-form surface. Practical implications Bio-scaffolds in tissue engineering require precise control over material distribution, such as the porosity, connectivity, internal pore architecture and external free-form surface. The proposed two-step adaptive direct slicing approach is a good balance of slicing efficiency and accuracy and can be useful for slicing bio-scaffolds’ models. Originality/value This paper gives supports to build bio-scaffold with DMD-based MPμSLA systems.

New methods for projecting a 3D object onto a free-form surface

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Jingyu Pei ◽  
Xiaoping Wang ◽  
Leen Zhang ◽  
Yu Zhou ◽  
Jinyuan Qian
Keyword(s):  
Approximate Solution ◽  
New Method ◽  
Free Form ◽  
Parallel Projection ◽  
Content Type ◽  
3D Object ◽  
New Methods ◽  
Free Form Surface ◽  
Newton Raphson ◽  
Raphson Iteration

Purpose This paper aims to provide a series of new methods for projecting a three-dimensional (3D) object onto a free-form surface. The projection algorithms presented can be divided into three types, namely, orthogonal, perspective and parallel projection. Design/methodology/approach For parametric surfaces, the computing strategy of the algorithm is to obtain an approximate solution by using a geometric algorithm, then improve the accuracy of the approximate solution using the Newton–Raphson iteration. For perspective projection and parallel projection on an implicit surface, the strategy replaces Newton–Raphson iteration by multi-segment tracing. The implementation takes two mesh objects as an example of calculating an image projected onto parametric and implicit surfaces. Moreover, a comparison is made for orthogonal projections with Hu’s and Liu’s methods. Findings The results show that the new method can solve the 3D objects projection problem in an effective manner. For orthogonal projection, the time taken by the new method is substantially less than that required for Hu’s method. The new method is also more accurate and faster than Liu’s approach, particularly when the 3D object has a large number of points. Originality/value The algorithms presented in this paper can be applied in many industrial applications such as computer aided design, computer graphics and computer vision.

Global adaptive slicing of NURBS based sculptured surface for minimum texture error in rapid prototyping

2015 ◽  
Vol 21 (6) ◽  
pp. 649-661 ◽  
Author(s):  
S. Sikder ◽  
A. Barari ◽  
H.A. Kishawy
Keyword(s):  
Rapid Prototyping ◽  
Computer Aided Design ◽  
Error Function ◽  
Cost Effective ◽  
Optimum Number ◽  
Sculptured Surface ◽  
Adaptive Slicing ◽  
Content Type ◽  
Direct Slicing ◽  
Adaptive Direct Slicing

Purpose – This paper aims to propose a global adaptive direct slicing technique of Non-Uniform Rational B-Spline (NURBS)-based sculptured surface for rapid prototyping where the NURBS representation is directly extracted from the computer-aided design (CAD) model. The imported NURBS surface is directly sliced to avoid inaccuracies due to tessellation methods used in common practice. The major objective is to globally optimize texture error function based on the available range of layer thicknesses of the utilized rapid prototyping machine. The total texture error is computed with the defined error function to verify slicing efficiency of this global adaptive slicing algorithm and to find the optimum number of slices. A variety of experiments are conducted to study the accuracy of the developed procedure, and the results are compared with previously developed algorithms. Design/methodology/approach – This paper proposes a new adaptive algorithm which globally optimizes a texture error function produced by staircase effect for a user-defined number of layers. The adaptive slicing algorithm dynamically calculates optimized slicing thicknesses based on the rapid prototyping machine’s specifications to minimize the texture error function. This paper also compares the results of implementing the developed methodology with the results of previously developed algorithms and presents cost-effective optimum slicing layer thicknesses. Findings – A new methodology for global adaptive direct slicing algorithm of CAD models, based on a texture error function for the final product and the possible layer thicknesses in rapid prototyping, has been developed and implemented. Comparing the results of implementation with the common practice for several case studies shows that the proposed approach has greater slicing efficiency. Typically, by utilizing this approach, the number of prototyping layers can be reduced by 20-50 per cent compared to the slicing with other algorithms, while maintaining or improving the accuracy of the final manufactured surfaces. Therefore, the developed slicing method provides a better solution to trade-off between the rapid prototyping time and the rapid prototyping accuracy. For the many advantages of global direct slicing, it can be seen as the future solution to the slicing process in rapid prototyping systems. Originality/value – This paper presents an innovative approach in direct global adaptive slicing of the additive manufacturing parts. The novel definition of an error function which comprehensively addresses the resulting manufactured surface quality of the entire product allows presenting an objective function to solve and to find the optimum selection of all the layer thicknesses during the slicing process.

A Golay3 sparse aperture optical system of primary mirror with free-form surface

2021 ◽  
Vol 28 (1) ◽  
pp. 113-118
Author(s):  
Bin Chen ◽  
Quanying Wu ◽  
Junliu Fan
Keyword(s):  
Optical System ◽  
Free Form ◽  
Primary Mirror ◽  
Sparse Aperture ◽  
Free Form Surface

Tool Path Generation for Five-Axis Controlled Machining of Free-Form Surface Using Barrel Tool: Control of Contact Point on Cutting Edge

2020 ◽  
Author(s):  
Tomonobu Suzuki ◽  
Koichi Morishige
Keyword(s):  
Tool Path ◽  
Contact Point ◽  
Cutting Edge ◽  
Free Form ◽  
End Mill ◽  
Ball End Mill ◽  
Surface Machining ◽  
Free Form Surface ◽  
The Cost ◽  
Five Axis

Abstract This study aimed to improve the efficiency of free-form surface machining by using a five-axis controlled machine tool and a barrel tool. The barrel tool has cutting edges, with curvature smaller than the radius, increasing the pick feed width compared with a conventional ball end mill of the same tool radius. As a result, the machining efficiency can be improved; however, the cost of the barrel tool is high and difficult to reground. In this study, a method to obtain the cutting points that make the cusp height below the target value is proposed. Moreover, a method to improve the tool life by continuously and uniformly changing the contact point on the cutting edge is proposed. The usefulness of the developed method is confirmed through machining simulations.

Fabrication and characterization of customized tubular scaffolds for tracheal tissue engineering by using solvent based 3D printing on predefined template

2021 ◽  
Vol 27 (2) ◽  
pp. 421-428
Author(s):  
Rudranarayan Kandi ◽  
Pulak Mohan Pandey ◽  
Misba Majood ◽  
Sujata Mohanty
Keyword(s):  
Tissue Engineering ◽  
Cell Adhesion ◽  
3D Printing ◽  
Chemical Properties ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
In Vitro Cytotoxicity ◽  
Content Type ◽  
Tracheal Tissue

Purpose This paper aims to discuss the successful fabrication of customized tubular scaffolds for tracheal tissue engineering with a novel route using solvent-based extrusion 3D printing. Design/methodology/approach The manufacturing approach involved extrusion of polymeric ink over a rotating predefined pattern to construct customized tubular structure of polycaprolactone (PCL) and polyurethane (PU). Dimensional deviation in thickness of scaffolds were calculated for various layer thicknesses of 3D printing. Physical and chemical properties of scaffolds were investigated by scanning electron microscope (SEM), contact angle measurement, Fourier Transform Infrared Spectroscopy (FTIR) and X-ray diffraction (XRD). Mechanical characterizations were performed, and the results were compared to the reported properties of human native trachea from previous reports. Additionally, in vitro cytotoxicity of the fabricated scaffolds was studied in terms of cell proliferation, cell adhesion and hemagglutination assay. Findings The developed fabrication route was flexible and accurate by printing customized tubular scaffolds of various scales. Physiochemical results showed good miscibility of PCL/PU blend, and decrease in crystalline nature of blend with the addition of PU. Preliminary mechanical assessments illustrated comparable mechanical properties with the native human trachea. Longitudinal compression test reported outstanding strength and flexibility to maintain an unobstructed lumen, necessary for the patency. Furthermore, the scaffolds were found to be biocompatible to promote cell adhesion and proliferation from the in vitro cytotoxicity results. Practical implications The attempt can potentially meet the demand for flexible tubular scaffolds that ease the concerns such as availability of suitable organ donors. Originality/value 3D printing over accurate predefined templates to fabricate customized grafts gives novelty to the present method. Various customized scaffolds were compared with conventional cylindrical scaffold in terms of flexibility.

Application of Convex Hull for Tool Interference Avoidance in 5-Axis CNC Machining

1996 ◽  
Author(s):  
Yuan-Shin Lee ◽  
Tien-Chien Chang
Keyword(s):  
Convex Hull ◽  
Tool Path ◽  
Correction Method ◽  
Nc Machining ◽  
Cnc Machining ◽  
Free Form ◽  
Interference Avoidance ◽  
Tool Interference ◽  
Free Form Surface ◽  
Free Form Surfaces

Abstract In this paper, a methodology of applying convex hull property in solving the tool interference problem is presented for 5-axis NC machining of free-form surfaces. Instead of exhausted point-by-point checking for possible tool interference, a quick checking can be done by using the convex hull constructed from the control polygon of free-form surface modeling. Global tool interference in 5-axis NC machining is detected using the convex hull of the free-form surface. A correction method for removing tool interference has also been developed to generate correct tool path for 5-axis NC machining. The inter-surface tool interference can be avoided by using the developed technique.

Creation and Manipulation of Complex Displacement Features During the Conceptual Phase of Design

1996 ◽  
Author(s):  
P. A. van Elsas ◽  
J. S. M. Vergeest
Keyword(s):  
Boundary Conditions ◽  
Surface Feature ◽  
Free Form ◽  
Shape Design ◽  
Surface Model ◽  
Test Results ◽  
Base Surface ◽  
Feature Design ◽  
Data Explosion ◽  
Free Form Surface

Abstract Surface feature design is not well supported by contemporary free form surface modelers. For one type of surface feature, the displacement feature, it is shown that intuitive controls can be defined for its design. A method is described that, given a surface model, allows a designer to create and manipulate displacement features. The method uses numerically stable calculations, and feedback can be obtained within tenths of a second, allowing the designer to employ the different controls with unprecedented flexibility. The algorithm does not use refinement techniques, that generally lead to data explosion. The transition geometry, connecting a base surface to a displaced region, is found explicitly. Cross-boundary smoothness is dealt with automatically, leaving the designer to concentrate on the design, instead of having to deal with mathematical boundary conditions. Early test results indicate that interactive support is possible, thus making this a useful tool for conceptual shape design.

Sign in / Sign up

Export Citation Format

Share Document