Investigation of selective laser melting process for Cu-5Sn alloy on surface roughness, microstructure and mechanical property

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Peng Yang ◽  
Dingyong He ◽  
Zengjie Wang ◽  
Zhen Tan ◽  
Hanguang Fu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Surface Roughness ◽  
Selective Laser Melting ◽  
High Strength ◽  
Melting Process ◽  
Scanning Speed ◽  
Laser Melting ◽  
Forming Process ◽  
Content Type

Purpose In this research, the highly dense bulk Cu-5Sn alloy specimens were fabricated using selective laser melting (SLM). This study aims to establish the relationship between laser power (LP), scanning speed (SS) and hatch space (HS) with surface roughness (Ra) and density. To obtain Cu-5Sn alloy formed parts with high strength and low surface roughness. The microstructure and mechanical properties of SLMed Cu-5Sn were investigated. Design/methodology/approach The relative density (RD) was optimized using the response surface method (RSM) and analysis of variance. First, the Ra of SLMed formed specimens was studied to optimize the forming process parameters with a good surface. Then, the dense specimens were studied by ANOVA and the RSM to obtain dense specimens for mechanical property analysis. Findings Dense specimens were obtained by RSM and ANOVA. The tensile properties were compared with the casted specimens. The yield and ultimate strengths increased from 71 and 131 MPa for the cast specimens to 334 and 489 MPa for the SLMed specimens, respectively. The ductility increased significantly from 11% to 23%, due to the refined microstructure of the SLMed specimens, as well as the formation of many twin crystals. Originality/value The Ra, RD and mechanical properties of SLM specimens Cu-5Sn were systematically studied, and the influencing factors were analyzed together. This study provides a theoretical and practical example to improve the surface quality and RD.

scholarly journals The Effect of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of Al6061 and AlSi10Mg Alloys

Materials ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 12 ◽  
Author(s):  
Ahmed Maamoun ◽  
Yi Xue ◽  
Mohamed Elbestawi ◽  
Stephen Veldhuis
Keyword(s):  
Mechanical Properties ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
High Strength ◽  
Melting Process ◽  
Laser Melting ◽  
Influence Of Process Parameters ◽  
Wide Range ◽  
Powder Characteristics

Additive manufacturing (AM) offers customization of the microstructures and mechanical properties of fabricated components according to the material selected and process parameters applied. Selective laser melting (SLM) is a commonly-used technique for processing high strength aluminum alloys. The selection of SLM process parameters could control the microstructure of parts and their mechanical properties. However, the process parameters limit and defects obtained inside the as-built parts present obstacles to customized part production. This study investigates the influence of SLM process parameters on the quality of as-built Al6061 and AlSi10Mg parts according to the mutual connection between the microstructure characteristics and mechanical properties. The microstructure of both materials was characterized for different parts processed over a wide range of SLM process parameters. The optimized SLM parameters were investigated to eliminate internal microstructure defects. The behavior of the mechanical properties of parts was presented through regression models generated from the design of experiment (DOE) analysis for the results of hardness, ultimate tensile strength, and yield strength. A comparison between the results obtained and those reported in the literature is presented to illustrate the influence of process parameters, build environment, and powder characteristics on the quality of parts produced. The results obtained from this study could help to customize the part’s quality by satisfying their design requirements in addition to reducing as-built defects which, in turn, would reduce the amount of the post-processing needed.

scholarly journals Effect of Selective Laser Melting Process Parameters on the Quality of Al Alloy Parts: Powder Characterization, Density, Surface Roughness, and Dimensional Accuracy

Materials ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 2343 ◽  
Author(s):  
Ahmed Maamoun ◽  
Yi Xue ◽  
Mohamed Elbestawi ◽  
Stephen Veldhuis
Keyword(s):  
Surface Roughness ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
Dimensional Accuracy ◽  
High Strength ◽  
Melting Process ◽  
Al Alloys ◽  
Al Alloy ◽  
Laser Melting

Additive manufacturing (AM) of high-strength Al alloys promises to enhance the performance of critical components related to various aerospace and automotive applications. The key advantage of AM is its ability to generate lightweight, robust, and complex shapes. However, the characteristics of the as-built parts may represent an obstacle to the satisfaction of the parts’ quality requirements. The current study investigates the influence of selective laser melting (SLM) process parameters on the quality of parts fabricated from different Al alloys. A design of experiment (DOE) was used to analyze relative density, porosity, surface roughness, and dimensional accuracy according to the interaction effect between the SLM process parameters. The results show a range of energy densities and SLM process parameters for AlSi10Mg and Al6061 alloys needed to achieve “optimum” values for each performance characteristic. A process map was developed for each material by combining the optimized range of SLM process parameters for each characteristic to ensure good quality of the as-built parts. This study is also aimed at reducing the amount of post-processing needed according to the optimal processing window detected.

scholarly journals On the Effect of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of Al Alloys

2018 ◽  
Author(s):  
Ahmed Maamoun ◽  
Yi Xue ◽  
Mohamed Elbestawi ◽  
Stephen Veldhuis
Keyword(s):  
Mechanical Properties ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
High Strength ◽  
Melting Process ◽  
Laser Melting ◽  
Influence Of Process Parameters ◽  
Microstructure And Mechanical Properties ◽  
Wide Range

Additive manufacturing (AM) offers customization of microstructure and mechanical properties of fabricated components according to the material selected, and process parameters applied. Selective laser melting (SLM) is the commonly used technique for processing high strength aluminum alloys. Selection of SLM process parameters could control the microstructure of parts and their mechanical properties. However, the process parameters limit and defects obtained inside the as-built parts present obstacles to customized part production. This study investigates the influence of SLM process parameters on the quality of as-built Al6061 and AlSi10Mg parts according to the mutual connection between the microstructure characteristics and mechanical properties. The microstructure of both materials was characterized for different parts processed over a wide range of SLM process parameters. The optimized SLM parameters were investigated to eliminate the internal microstructure defects. The behaviour of mechanical properties of parts was presented through regression models generated from the design of experiment (DOE) analysis for the results of hardness, ultimate tensile strength, and yield strength. A comparison between the results obtained and that reported in the literature is presented to illustrate the influence of process parameters, build environment, and powder characteristics on the quality of parts produced. The results obtained from this study could help to customize the part’s quality by satisfying their design requirements in addition to reducing the as-built defects which in turn reduce the amount of the post-processing needed.

scholarly journals Improving surface quality in selective laser melting based tool making

2021 ◽  
Author(s):  
Filippo Simoni ◽  
Andrea Huxol ◽  
Franz-Josef Villmer
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
Surface Quality ◽  
Selective Laser Melting ◽  
Melting Process ◽  
Laser Remelting ◽  
Laser Melting ◽  
Great Cost ◽  
Starting Point ◽  
Processing Techniques

AbstractIn the last years, Additive Manufacturing, thanks to its capability of continuous improvements in performance and cost-efficiency, was able to partly replace and redefine well-established manufacturing processes. This research is based on the idea to achieve great cost and operational benefits especially in the field of tool making for injection molding by combining traditional and additive manufacturing in one process chain. Special attention is given to the surface quality in terms of surface roughness and its optimization directly in the Selective Laser Melting process. This article presents the possibility for a remelting process of the SLM parts as a way to optimize the surfaces of the produced parts. The influence of laser remelting on the surface roughness of the parts is analyzed while varying machine parameters like laser power and scan settings. Laser remelting with optimized parameter settings considerably improves the surface quality of SLM parts and is a great starting point for further post-processing techniques, which require a low initial value of surface roughness.

scholarly journals Directionally-Dependent Mechanical Properties of Ti6Al4V Manufactured by Electron Beam Melting (EBM) and Selective Laser Melting (SLM)

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3603
Author(s):  
Tim Pasang ◽  
Benny Tavlovich ◽  
Omry Yannay ◽  
Ben Jakson ◽  
Mike Fry ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Surface Roughness ◽  
Tensile Strength ◽  
Electron Beam ◽  
Additive Manufacturing ◽  
Selective Laser Melting ◽  
Electron Beam Melting ◽  
Rolling Direction ◽  
Laser Melting ◽  
Plate Rolling

An investigation of mechanical properties of Ti6Al4V produced by additive manufacturing (AM) in the as-printed condition have been conducted and compared with wrought alloys. The AM samples were built by Selective Laser Melting (SLM) and Electron Beam Melting (EBM) in 0°, 45° and 90°—relative to horizontal direction. Similarly, the wrought samples were also cut and tested in the same directions relative to the plate rolling direction. The microstructures of the samples were significantly different on all samples. α′ martensite was observed on the SLM, acicular α on EBM and combination of both on the wrought alloy. EBM samples had higher surface roughness (Ra) compared with both SLM and wrought alloy. SLM samples were comparatively harder than wrought alloy and EBM. Tensile strength of the wrought alloy was higher in all directions except for 45°, where SLM samples showed higher strength than both EBM and wrought alloy on that direction. The ductility of the wrought alloy was consistently higher than both SLM and EBM indicated by clear necking feature on the wrought alloy samples. Dimples were observed on all fracture surfaces.

Fabrication and mechanical properties of Al–Si-based alloys by selective laser melting process

2021 ◽  
pp. 1-8
Author(s):  
Yeong Seong Eom ◽  
Kyung Tae Kim ◽  
Dong Won Kim ◽  
Soo ho Jung ◽  
Jung Woo Nam ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Selective Laser Melting ◽  
Melting Process ◽  
Laser Melting ◽  
Selective Laser Melting Process

Track evolution and surface characteristics of selective laser melting Ti6Al4V

2018 ◽  
Vol 24 (9) ◽  
pp. 1554-1562 ◽  
Author(s):  
Luo Zhang ◽  
Haihong Zhu ◽  
Jiahe Liu ◽  
Xiaoyan Zeng
Keyword(s):  
Surface Morphology ◽  
Selective Laser Melting ◽  
Surface Characteristics ◽  
Scanning Speed ◽  
Bulk Sample ◽  
Three Dimension ◽  
Single Track ◽  
Heat Accumulation ◽  
Laser Melting ◽  
Content Type

Purpose The purpose of this paper is to investigate the track evolution and surface characteristics of selective laser melting Ti6Al4V. Design/methodology/approach In the present paper, Ti6Al4V single-track, multi-track and bulk sample were formed at different scanning speed by selective laser melting (SLM). Then, the surface morphology, three-dimension profile and surface roughness were evaluated. The width of the single and multi-track was measured and compared. Findings The results showed that the heat accumulation played a great role on the evolution of tracks and surface characteristics from single-track to multi-track and to bulk. The surface morphology of the subsequent tracks became more regular when the single-track was irregular at the same high scanning speed. The width of last track Wn was always larger than that of the first track W1. The Ra of the top of the bulk increased with the increase of the scanning speed, this trend was as same as the Ra of the single-track, but the trend of Ra of the side was opposite. Originality/value The effect of heat accumulation on the track evolution and surface characteristics is obtained. The results can help to derive a smooth surface with a regular and continuous track in SLM.

Effect of selective laser melting process parameters on microstructural and mechanical properties of TiC–NiCr cermet

2020 ◽  
Vol 46 (18) ◽  
pp. 28749-28757 ◽  
Author(s):  
Atefeh Aramian ◽  
Zohreh Sadeghian ◽  
Seyed Mohammad Javad Razavi ◽  
Konda Gokuldoss Prashanth ◽  
Filippo Berto
Keyword(s):  
Mechanical Properties ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
Melting Process ◽  
Laser Melting ◽  
Selective Laser Melting Process

Selective laser melting of magnesium AZ31B alloy powder

2019 ◽  
Vol 26 (2) ◽  
pp. 249-258 ◽  
Author(s):  
Andrzej Pawlak ◽  
Patrycja E. Szymczyk ◽  
Tomasz Kurzynowski ◽  
Edward Chlebus
Keyword(s):  
Mechanical Properties ◽  
Selective Laser Melting ◽  
Alloy Powder ◽  
Az31 Alloy ◽  
Optimum Process ◽  
Laser Melting ◽  
Content Type ◽  
Fine Grained ◽  
Az31b Alloy ◽  
Hot Rolled

Purpose This paper aims to discuss the results of material tests conducted on specimens manufactured from AZ31 alloy powder by selective laser melting (SLM) technology. The manufactured specimens were then subjected to porosity assessment, microstructure analysis as well as to mechanical and corrosion tests. Design/methodology/approach SLM process was optimized using the design of experiments tools. Experiments aimed at selecting optimum process parameters were carried out in accordance with a five-level rotatable central composite design. Findings The porosity results showed very low values of <1 per cent, whereas mechanical properties were close to the values reported for the reference wrought AZ31 alloy in hot-rolled state. A fine-grained microstructure was observed with a large range of grain size, which enhanced the material’s mechanical properties. Corrosion characteristics of the SLM-manufactured material exceed those determined for the wrought material. Originality/value The results presented in this paper drive interest in magnesium alloys used in additive manufacturing processes. Low porosity, good mechanical properties, form of the microstructure and, most importantly, improved corrosion characteristics suggest that SLM provides great potential for the manufacture of ultralight structures, including resorbable metallic implants.

Sign in / Sign up

Export Citation Format

Share Document