Incoherent-scatter computed tomography with monochromatic synchrotron x ray: feasibility of multi-CT imaging system for simultaneous measurement-of fluorescent and incoherent scatter x rays

1997 ◽  
Vol 44 (5) ◽  
pp. 1760-1769 ◽  
Author(s):  
T. Yuasa ◽  
M. Akiba ◽  
T. Takeda ◽  
M. Kazama ◽  
A. Hoshino ◽  
...  
2021 ◽  
Author(s):  
Konstantin Willer ◽  
Alexander Fingerle ◽  
Wolfgang Noichl ◽  
Fabio De Marco ◽  
Manuela Frank ◽  
...  

SummaryBackgroundDiseases of the respiratory system are leading global causes of chronic morbidity and mortality. While advanced medical imaging technologies of today deliver detailed diagnostic information, a low-dose, fast, and inexpensive option for early detection and/or follow-ups is still lacking. Here, we report on the first human application of a novel modality, namely X-ray dark-field chest imaging, which might fill this gap. Enabling the assessment of microstructural changes in lung parenchyma, this technique presents a more sensitive alternative to conventional chest X-rays, and yet requires only a fraction of the dose applied in computed tomography (CT).MethodsFor this first clinical evaluation, we have built a novel dark-field chest X-ray system, which is also capable of simultaneously acquiring a conventional thorax radiograph (7 seconds, 0·035 mSv effective dose). Representing a major medical condition, we selected chronic obstructive pulmonary disease as study subject to obtain a first impression of potential diagnostic benefits relevant to humans. For a collective of 77 patients with different disease stages, X-ray dark-field- and CT-images were acquired and visually assessed by 5 readers. In addition, pulmonary function tests were performed for every patient. The individual data sets were evaluated in a statistical work-up using correlation testing, rank-based analysis of variance, and pair-wise post-hoc comparison.FindingsCompared to CT-based parameters (quantitative emphysema: ρ=–0·27, p=0·0893 and visual emphysema: ρ=–0·45, p=0·0028), the dark-field signal (ρ=0·62, p<0·0001) yields a stronger correlation with diffusion capacity in the evaluated collective. Emphysema assessment based on dark-field chest X-ray features yields consistent conclusions with findings from visual CT image interpretation and shows improved diagnostic performance in comparison to conventional clinical tests characterizing emphysema.InterpretationX-ray dark-field chest imaging allows the diagnosis of pulmonary emphysema as it provides relevant information representing the structural condition of lung parenchyma. Significant diagnostic benefits are also expected for other lung disorders.FundingEuropean Research Council, Royal Philips, Karlsruhe Nano Micro Facility.Research in contextEvidence before this studyWith a rising number of examinations in the last decades, X-rays play an indispensable role in clinical routine. Contrast formation in medical X-ray imaging such as radiography, fluoroscopy, and computed tomography is based on attenuation, which generally benefits from large differences in atomic number and/or mass density between involved materials. If these conditions are not prevalent, or the resolution of the imaging system is not sufficient, diagnostic capabilities are limited. However, attenuation is not the only physical effect X-rays are subjected to when penetrating matter. Variations in an object’s electron density lead to refraction and coherent small-angle scattering of incident X-rays. Phase-sensitive imaging techniques can detect these wave-optical phenomena, yielding additional object information. The dark-field signal, being a function of small-angle scattering, can provide structural information on the micron scale, generally below the resolution limit of the imaging system. Due to their very stringent requirements to X-ray source coherence, these techniques were originally limited to large-scale synchrotron facilities. The proposal of a three-grating interferometer in 2006, however, enabled the use of low-brilliance sources for X-ray phase-contrast imaging and thereby paved the way into the clinics. Such an apparatus elegantly allows the simultaneous acquisition of the conventional attenuation, differential phase-contrast, and novel dark-field signals. In a compact table-top system suitable for investigating murine disease models, numerous studies on pulmonary disorders such as chronic obstructive pulmonary disease (COPD), pulmonary fibrosis, pneumothorax, ventilator-associated lung injury, lung cancer, and pneumonia have been conducted and demonstrated a broad diagnostic value of the dark-field modality in particular. Adapting the system to enable imaging of the human body is a technical challenge due to limitations of the micrometer-fine, high aspect ratio grating structures in terms of fabricable size and performance at clinically relevant X-ray energies. The first evidences that these limitations are manageable were delivered in 2017 and 2018 by in-vivo porcine and human cadaver studies with an experimental prototype system.Added value of this studyWith this work we present the first X-ray dark-field chest images of human subjects in-vivo and demonstrate the method’s feasibility in a clinical surrounding. To enable this study, we have conceived, constructed, and commissioned a custom-built first demonstrator system suitable for patient use. This includes satisfying clinical demands regarding safety, usability, acquisition time, radiation dose, field of view, and image quality. This study marks the transition from investigating artificially induced disease models to evaluating the modality’s actual diagnostic performance in patients.Implications of all available evidenceOur findings indicate that X-ray dark-field radiography provides image-type information of the lungs’ underlying microstructure in humans. In view of the strong link between alveolar structure and the functional condition of the lung, this capability is highly relevant for respiratory medicine and might help to establish a better understanding of pulmonary disorders. With regard to early detection of COPD, which is generally accompanied by structural impairments of the lung, this novel technique might support resolving the prevalent under-diagnosis reported in literature. With an effective dose significantly lower (about a factor of hundred) compared to thorax computed tomography, dark-field radiography could be used as broadly deployed screening tool.


Author(s):  
Theodore J. Heindel ◽  
Terrence C. Jensen ◽  
Joseph N. Gray

There are several methods available to visualize fluid flows when one has optical access. However, when optical access is limited to near the boundaries or not available at all, alternative visualization methods are required. This paper will describe flow visualization using an X-ray system that is capable of digital X-ray radiography, digital X-ray stereography, and digital X-ray computed tomography (CT). The unique X-ray flow visualization facility will be briefly described, and then flow visualization of various systems will be shown. Radiographs provide a two-dimensional density map of a three dimensional process or object. Radiographic images of various multiphase flows will be presented. When two X-ray sources and detectors simultaneously acquire images of the same process or object from different orientations, stereographic imaging can be completed; this type of imaging will be demonstrated by trickling water through packed columns and by absorbing water in a porous medium. Finally, local time-averaged phase distributions can be determined from X-ray computed tomography (CT) imaging, and this will be shown by comparing CT images from two different gas-liquid sparged columns.


2020 ◽  
Vol 27 (3) ◽  
pp. 737-745
Author(s):  
Zhijun Chi ◽  
Yingchao Du ◽  
Wenhui Huang ◽  
Chuanxiang Tang

A Thomson scattering X-ray source can provide quasi-monochromatic, continuously energy-tunable, polarization-controllable and high-brightness X-rays, which makes it an excellent tool for X-ray fluorescence computed tomography (XFCT). In this paper, we examined the suppression of Compton scattering background in XFCT using the linearly polarized X-rays and the implementation feasibility of linearly polarized XFCT based on this type of light source, concerning the influence of phantom attenuation and the sampling strategy, its advantage over K-edge subtraction computed tomography (CT), the imaging time, and the potential pulse pile-up effect by Monte Carlo simulations. A fan beam and pinhole collimator geometry were adopted in the simulation and the phantom was a polymethyl methacrylate cylinder inside which were gadolinium (Gd)-loaded water solutions with Gd concentrations ranging from 0.2 to 4.0 wt%. Compared with the case of vertical polarization, Compton scattering was suppressed by about 1.6 times using horizontal polarization. An accurate image of the Gd-containing phantom was successfully reconstructed with both spatial and quantitative identification, and good linearity between the reconstructed value and the Gd concentration was verified. When the attenuation effect cannot be neglected, one full cycle (360°) sampling and the attenuation correction became necessary. Compared with the results of K-edge subtraction CT, the contrast-to-noise ratio values of XFCT were improved by 2.03 and 1.04 times at low Gd concentrations of 0.2 and 0.5 wt%, respectively. When the flux of a Thomson scattering light source reaches 1013 photons s−1, it is possible to finish the data acquisition of XFCT at the minute or second level without introducing pulse pile-up effects.


2018 ◽  
Vol 12 (1) ◽  
pp. 18-28
Author(s):  
Nirmal D Patil ◽  
Sudhir K Srivastava ◽  
Sunil Bhosale ◽  
Shaligram Purohit

<sec><title>Study Design</title><p>This was a double-blinded cross-sectional study, which obtained no financial support for the research.</p></sec><sec><title>Purpose</title><p>To obtain a detailed morphometry of the lateral mass of the subaxial cervical spine.</p></sec><sec><title>Overview of Literature</title><p>The literature offers little data on the dimensions of the lateral mass of the subaxial cervical spine.</p></sec><sec><title>Methods</title><p>We assessed axial, sagittal, and coronal computed tomography (CT) cuts and anteroposterior and lateral X-rays of the lateral mass of the subaxial cervical spine of 104 patients (2,080 lateral masses) who presented to a tertiary care public hospital (King Edward Memorial Hospital, Mumbai) in a metropolitan city in India.</p></sec><sec><title>Results</title><p>For a majority of the parameters, males and females significantly differed at all levels (<italic>p</italic>&lt;0.05). Females consistently required higher (<italic>p</italic>&lt;0.05) minimum lateral angulation and lateral angulation. While the minimum lateral angulation followed the order of C5&lt;C4&lt;C6&lt;C3, the lateral angulation followed the order of C3&lt;C5&lt;C4&lt;C6. The lateral mass becomes longer and narrower from C3 to C7. In axial cuts, the dimensions increased from C3 to C6. The sagittal cut thickness and diagonal length increased and the sagittal cut height decreased from C3 to C7. The sagittal cut height was consistently lower in the Indian population at all levels, especially at the C7 level, as compared with the Western population, thereby questioning the acceptance of a 3.5-mm lateral mass screw. A good correlation exists between X-ray- and CT-based assessments of the lateral mass.</p></sec><sec><title>Conclusions</title><p>Larger lateral angulation is required for Indian patients, especially females. The screw length can be effectively calculated by analyzing the lateral X-ray. A CT scan should be reserved for specific indications, and a caution must be exercised while inserting C7 lateral mass screws.</p></sec>


Materials ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 4371 ◽  
Author(s):  
Kiana Nikeghbal ◽  
Zahra Zamanian ◽  
Shoaleh Shahidi ◽  
Gianrico Spagnuolo ◽  
Parisa Soltani

Researchers have always been interested in finding new and effective materials for protection against radiation. This experimental study aimed to design and fabricate new types of nano-material and micro-material based shields against the ionizing effect of cone beam computed tomography (CBCT) X-rays. To fabricate a flexible prototype, we added dioctyl phthalate (DOP) oil to emulsion polyvinyl chloride (PVC) powder. The paste was mixed and dispersed. Then, nano- and micro-powders of WO3 and Bi2O3 were added to the paste, with the weight ratio of 20% PVC, 20% DOP, and 60% nano- and micro-metals. Using an ultrasonic mixer, the polymer matrix and metals were mixed and a paste with a thick texture was developed. The resultant paste was poured into glass molds and the molds were then heated in an oven. After cooling, the resultant sheets were selected for further experiments. A CBCT unit and dosimeter were used to evaluate the characterization and X-ray shielding properties of the fabricated prototypes. The half-value layers (HVL) for nano-WO3, micro-WO3, nano-Bi2O3, and micro-Bi2O3 were 0.0390, 0.0524, 0.0351, and 0.0374 cm, respectively. In addition, the linear attenuation coefficient (µ) for these materials were 17.77, 13.20, 19.71, and 18.5 cm−1, respectively. The findings indicate that nano-structured samples are more effective in the attenuation of X-ray energy. The nano-structured WO3 prototype was nearly 34% more efficient in attenuating radiation compared to the micro-structured WO3 prototype. This difference in nano- and micro-structured Bi2O3 prototypes was 6.5%.


2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Pasquale Delogu ◽  
Vittorio Di Trapani ◽  
Luca Brombal ◽  
Giovanni Mettivier ◽  
Angelo Taibi ◽  
...  

Abstract The limits of mammography have led to an increasing interest on possible alternatives such as the breast Computed Tomography (bCT). The common goal of all X-ray imaging techniques is to achieve the optimal contrast resolution, measured through the Contrast to Noise Ratio (CNR), while minimizing the radiological risks, quantified by the dose. Both dose and CNR depend on the energy and the intensity of the X-rays employed for the specific imaging technique. Some attempts to determine an optimal energy for bCT have suggested the range 22 keV–34 keV, some others instead suggested the range 50 keV–60 keV depending on the parameters considered in the study. Recent experimental works, based on the use of monochromatic radiation and breast specimens, show that energies around 32 keV give better image quality respect to setups based on higher energies. In this paper we report a systematic study aiming at defining the range of energies that maximizes the CNR at fixed dose in bCT. The study evaluates several compositions and diameters of the breast and includes various reconstruction algorithms as well as different dose levels. The results show that a good compromise between CNR and dose is obtained using energies around 28 keV.


Sign in / Sign up

Export Citation Format

Share Document