A dual-frame hybrid vector control of vector modulated VIENNA I rectifier for unity power factor operation under unbalanced mains condition

Author(s):  
Hesameddin Mirzaee Teshnizi ◽  
Ali Moallem ◽  
MohammadReza Zolghadri ◽  
Mehdi Ferdowsi
Author(s):  
Kanungo Barada Mohanty ◽  
Satish Choudhury ◽  
Madhu Singh

A grid connected doubly-fed induction generator (DFIG) system, driven by variable speed wind turbine is considered in this research to satisfy grid code requirements. Remaining grid synchronized and stable under voltage sag and voltage swell, obtaining power control through dc link voltage control, and providing unity power factor at grid terminals are the achievements. The DFIG system uses two back-to-back converters. Vector control strategy is used with the grid side and rotor side converters, and taken up for research for further improvement. The grid side converter controls dc-link voltage and maintains unity power factor at the grid connection point. The rotor side converter supplies the reactive power of the machine and maintains the speed constant irrespective of the transient behavior of the grid. In this paper the behavior of the DFIG system is analyzed under grid voltage fluctuation and the experimental results are obtained using RT-LAB. Main contribution of this work is in improving the DFIG system performance with grid low voltage and over voltage ride through capability through simulation, and its real time experimental verification.


Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1527
Author(s):  
R. Senthil Kumar ◽  
K. Mohana Sundaram ◽  
K. S. Tamilselvan

The extensive usage of power electronic components creates harmonics in the voltage and current, because of which, the quality of delivered power gets affected. Therefore, it is essential to improve the quality of power, as we reveal in this paper. The problems of load voltage, source current, and power factors are mitigated by utilizing the unified power flow controller (UPFC), in which a combination of series and shunt converters are combined through a DC-link capacitor. To retain the link voltage and to maximize the delivered power, a PV module is introduced with a high gain converter, named the switched clamped diode boost (SCDB) converter, in which the grey wolf optimization (GWO) algorithm is instigated for tracking the maximum power. To retain the link-voltage of the capacitor, the artificial neural network (ANN) is implemented. A proper control of UPFC is highly essential, which is achieved by the reference current generation with the aid of a hybrid algorithm. A genetic algorithm, hybridized with the radial basis function neural network (RBFNN), is utilized for the generation of a switching sequence, and the generated pulse has been given to both the series and shunt converters through the PWM generator. Thus, the source current and load voltage harmonics are mitigated with reactive power compensation, which results in attaining a unity power factor. The projected methodology is simulated by MATLAB and it is perceived that the total harmonic distortion (THD) of 0.84% is attained, with almost a unity power factor, and this is validated with FPGA Spartan 6E hardware.


Sign in / Sign up

Export Citation Format

Share Document