Voltage-mode multifunction biquadratic filter with single input and five outputs

Author(s):  
Hua-Pin Chen ◽  
Yu-Hsin Lin ◽  
Yu-Ling Chang
2015 ◽  
Vol 781 ◽  
pp. 155-159 ◽  
Author(s):  
Suriya Soisang ◽  
Kamon Jirasereemomkul ◽  
Winai Jaikla ◽  
Kohji Higuchi

This paper presents a new voltage-mode single-input multiple-output multifunctional biquadratic filter using voltage differencing differential difference amplifiers (VDDDA) with high-input impedance. It consists of two VDDDA, two resistors, and two grounded capacitors. It can synthesize basic filter functions: high-past (HP), low-pass (LP) and band-pass (BP), responding through only single structure. The natural frequency can obtain by adjusting bias currents of VDDDA without disturbing quality factors. Because of using VDDDA as an active device in the circuit, the power consumption was low. The simulation using PSPICE program indicated that circuit operation has good agreement with the theory.


1996 ◽  
Vol 19 (3) ◽  
pp. 133-138 ◽  
Author(s):  
Muhammad Taher Abuelma'atti ◽  
Azhar Quddus

A new voltage-mode active-filter with single input and three outputs is presented. The parameters of the proposed filter are programmable and the filter uses grounded capacitors. The proposed circuit can simultaneously realize lowpass, highpass, and bandpass biquadratic filter functions and enjoys low temperature sensitivities.


1995 ◽  
Vol 18 (4) ◽  
pp. 273-278 ◽  
Author(s):  
Muhammad Taher Abuelma'atti ◽  
Azhar Quddus

A new universal voltage-mode active-filter with single input and five outputs is presented. The parameters of the proposed filter are programmable and the filter uses grounded capacitors and resistors. The proposed circuit can simultaneously realize lowpass, highpass, bandpass, allpass, and notch biquadratic filter functions and enjoys low temperature sensitivities.


Sensors ◽  
2019 ◽  
Vol 19 (10) ◽  
pp. 2349 ◽  
Author(s):  
San-Fu Wang ◽  
Hua-Pin Chen ◽  
Yitsen Ku ◽  
Yi-Chun Lin

This paper presents a versatile tunable voltage-mode biquadratic filter with five inputs and three outputs. The proposed filter enjoys five single-ended output operational transconductance amplifiers (OTAs) and two grounded capacitors. The filter can be easily transformed into a quadrature oscillator. The filter with grounded capacitors is resistorless and electronically tunable. Either a voltage-mode five-input single-output biquadratic filter or a voltage-mode single-input three-output biquadratic filter can be operated by appropriate selecting input and output terminals. In the operation of five-input single-output biquadratic filter, the non-inverting lowpass, non-inverting bandpass, inverting bandpass, inverting highpass, non-inverting bandreject, inverting bandreject, and non-inverting allpass filtering responses can be realized by appropriately applying the input voltage signals. In the operation of single-input three-output biquadratic filter, the non-inverting/inverting lowpass, bandpass and bandreject filtering responses can be realized simultaneously. The circuit provides independent adjustment of the resonance angular frequency and quality factor, high-input impedance, and no inverting-type input voltage signals are imposed. The application in quadrature oscillator exhibits independent electronic tuning characteristic of the oscillation condition and the oscillation frequency. The theoretical analysis has been verified through OrCAD PSpice and furthermore by experimental measurements.


2010 ◽  
Vol 2010 ◽  
pp. 1-5 ◽  
Author(s):  
Hua-Pin Chen

This paper introduces a novel voltage-mode multifunction biquadratic filter with single input and four outputs using two plus-type differential difference current conveyors (DDCCs) and four grounded passive components. The filter can realize inverting highpass, inverting bandpass, noninverting lowpass, and noninverting bandpass filter responses, simultaneously. It still maintains the following advantages: (i) using grounded capacitors attractive for integration and absorbing shunt parasitic capacitance, (ii) using grounded resistors at allXterminals of DDCCs suitable for the variations of filter parameters and absorbing series parasitic resistances at allXterminals of DDCCs, (iii) high-input impedance good for cascadability, (iv) no need to change the filter topology, (v) no need to component-matching conditions, (vi) low active and passive sensitivity performances, and (vii) simpler configuration due to the use of plus-type DDCCs only. HSPICE and MATLAB simulations results are provided to demonstrate the theoretical analysis.


2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Jiun-Wei Horng ◽  
Zih-Yang Jhao

A voltage-mode universal biquadratic filter using a differential voltage current conveyor (DVCC), two capacitors, and two resistors is presented. The proposed circuit has four input terminals and three output terminals and can realize all the standard filter functions, which are lowpass, bandpass, highpass, notch, and allpass filters, without changing the circuit topology. Three simultaneous output filter responses can be obtained from some derived filter types. The proposed circuit employs only one DVCC that simplifies the configuration.


Author(s):  
Rajeshwari Pandey ◽  
Neeta Pandey ◽  
Sajal Kumar Paul ◽  
Ajay Singh ◽  
Balamurali Sriram ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document