Cost-effective multilayer network optimization:A top down decomposition solution

Author(s):  
Hongfang Yu ◽  
Xiaoning Zhang ◽  
Wang Li ◽  
Vishal Anand
2020 ◽  
Vol 32 (35) ◽  
pp. 1907101 ◽  
Author(s):  
Woo‐Bin Jung ◽  
Sungwoo Jang ◽  
Soo‐Yeon Cho ◽  
Hwan‐Jin Jeon ◽  
Hee‐Tae Jung

RSC Advances ◽  
2016 ◽  
Vol 6 (51) ◽  
pp. 45923-45930 ◽  
Author(s):  
Peixun Fan ◽  
Minlin Zhong ◽  
Benfeng Bai ◽  
Guofan Jin ◽  
Hongjun Zhang

Large-scale and cost-effective generation of desired 3D self-supporting macro–micronano-nanowire architectures is realized by a top-down and bottom-up combined approach.


Author(s):  
H.H. Yap ◽  
P.K. Tan ◽  
J. Lam ◽  
T.H. Ng ◽  
G.R. Low ◽  
...  

Abstract With the scaling of semiconductor devices to nanometer range, ensuring surface uniformity over a large area while performing top down physical delayering has become a greater challenge. In this paper, the application of laser deprocessing technique (LDT) to achieve better surface uniformity as well as for fast deprocessing of sample for defect identification in nanoscale devices are discussed. The proposed laser deprocess technique is a cost-effective and quick way to deprocess sample for defect identification and Transmission Electron Microscopy (TEM) analysis.


2021 ◽  
Author(s):  
Vijayasree Haridas ◽  
Zahira Binti Yaakob ◽  
Sankaran Sugunan ◽  
Binitha N Narayanan

Expensive and high-temperature methods like chemical vapour deposition and epitaxial growth are mainly investigated for turbostratic graphene preparation whereas, cost-effective production by a top-down approach from graphite is presented here....


2020 ◽  
Vol 10 (18) ◽  
pp. 6169
Author(s):  
Rouzbeh Afsharhasani ◽  
Moses Karakouzian ◽  
Visar Farhangi

This study investigates the effect of the location of an O-cell hydraulic jack along the length of a drilled shaft in a full-scale Osterberg test performed in soils containing layers of caliche. The location of the hydraulic jack with respect to caliche layers influences the measurements obtained from the Osterberg test and the subsequent interpretation of drilled shaft capacity. In this study, drilled shaft capacities were derived utilizing data from 30 Osterberg full-scale field load tests in soils containing caliche layers. The hydraulic jack was placed at the midpoint of the drilled shaft length. Additionally, the Osterberg test data was used to calibrate a numerical model by Plaxis finite element software for drilled shaft analysis. Using the calibrated model, several scenarios of hydraulic jack location were simulated. The scenarios included hydraulic jack locations at several distances above and below a caliche layer. The results of the simulations indicate that in cases where the O-cell was installed far from the caliche layer, the Osterberg tests results showed lower pile resistance capacity compared to the top-down test. However, in cases where the O-cell was installed close to the caliche layers, the Osterberg tests results showed comparable pile resistance capacity compared to the top-down tests. This study recommends installing the hydraulic jack as close as possible to the caliche layers for more reliable interpretation of the Osterberg field tests which leads to a cost-effective design approach by reducing the required shaft length.


2019 ◽  
Vol 7 (7) ◽  
pp. 1-250 ◽  
Author(s):  
Naomi J Fulop ◽  
Angus IG Ramsay ◽  
Rachael M Hunter ◽  
Christopher McKevitt ◽  
Catherine Perry ◽  
...  

Background Centralising acute stroke services is an example of major system change (MSC). ‘Hub and spoke’ systems, consisting of a reduced number of services providing acute stroke care over the first 72 hours following a stroke (hubs), with a larger number of services providing care beyond this phase (spokes), have been proposed to improve care and outcomes. Objective To use formative evaluation methods to analyse reconfigurations of acute stroke services in different regions of England and to identify lessons that will help to guide future reconfigurations, by studying the following contrasting cases: (1) London (implemented 2010) – all patients eligible for Hyperacute Stroke Units (HASUs); patients admitted 24 hours a day, 7 days a week; (2) Greater Manchester A (GMA) (2010) – only patients presenting within 4 hours are eligible for HASU treatment; one HASU operated 24/7, two operated from 07.00 to 19.00, Monday to Friday; (3) Greater Manchester B (GMB) (2015) – all patients eligible for HASU treatment (as in London); one HASU operated 24/7, two operated with admission extended to the hours of 07.00–23.00, Monday to Sunday; and (4) Midlands and East of England – planned 2012/13, but not implemented. Design Impact was studied through a controlled before-and-after design, analysing clinical outcomes, clinical interventions and cost-effectiveness. The development, implementation and sustainability of changes were studied through qualitative case studies, documentation analysis (n = 1091), stakeholder interviews (n = 325) and non-participant observations (n = 92; ≈210 hours). Theory-based framework was used to link qualitative findings on process of change with quantitative outcomes. Results Impact – the London centralisation performed significantly better than the rest of England (RoE) in terms of mortality [–1.1%, 95% confidence interval (CI) –2.1% to –0.1%], resulting in an estimated additional 96 lives saved per year beyond reductions observed in the RoE, length of stay (LOS) (–1.4 days, 95% –2.3 to –0.5 days) and delivering effective clinical interventions [e.g. arrival at a Stroke Unit (SU) within 4 hours of ‘clock start’ (when clock start refers to arrival at hospital for strokes occurring outside hospital or the appearance of symptoms for patients who are already in-patients at the time of stroke): London = 66.3% (95% CI 65.6% to 67.1%); comparator = 54.4% (95% CI 53.6% to 55.1%)]. Performance was sustained over 6 years. GMA performed significantly better than the RoE on LOS (–2.0 days, 95% CI –2.8 to –1.2 days) only. GMB (where 86% of patients were treated in HASU) performed significantly better than the RoE on LOS (–1.5 days, 95% CI –2.5 to –0.4 days) and clinical interventions [e.g. SU within 4 hours: GMB = 79.1% (95% CI 77.9% to 80.4%); comparator = 53.4% (95% CI 53.0% to 53.7%)] but not on mortality (–1.3%, 95% CI –2.7% to 0.01%; p = 0.05, accounting for reductions observed in RoE); however, there was a significant effect when examining GMB HASUs only (–1.8%, 95% CI –3.4% to –0.2%), resulting in an estimated additional 68 lives saved per year. All centralisations except GMB were cost-effective at 10 years, with a higher net monetary benefit than the RoE at a willingness to pay for a quality-adjusted life-year (QALY) of £20,000–30,000. Per 1000 patients at 10 years, London resulted in an additional 58 QALYs, GMA resulted in an additional 18 QALYs and GMB resulted in an additional 6 QALYs at costs of £1,014,363, –£470,848 and £719,948, respectively. GMB was cost-effective at 90 days. Despite concerns about the potential impact of increased travel times, patients and carers reported good experiences of centralised services; this relied on clear information at every stage. Planning change – combining top-down authority and bottom-up clinical leadership was important in co-ordinating multiple stakeholders to agree service models and overcome resistance. Implementation – minimising phases of change, use of data, service standards linked to financial incentives and active facilitation of changes by stroke networks was important. The 2013 reforms of the English NHS removed sources of top-down authority and facilitative capacity, preventing centralisation (Midlands and East of England) and delaying implementation (GMB). Greater Manchester’s Operational Delivery Network, developed to provide alternative network facilitation, and London’s continued use of standards suggested important facilitators of centralisation in a post-reform context. Limitations The main limitation of our quantitative analysis was that we were unable to control for stroke severity. In addition, findings may not apply to non-urban settings. Data on patients’ quality of life were unavailable nationally, clinical interventions measured changed over time and national participation in audits varied. Some qualitative analyses were retrospective, potentially influencing participant views. Conclusions Centralising acute stroke services can improve clinical outcomes and care provision. Factors related to the service model implemented, how change is implemented and the context in which it is implemented are influential in improvement. We recommend further analysis of how different types of leadership contribute to MSC, patient and carer experience during the implementation of change, the impact of change on further clinical outcomes (disability and QoL) and influence of severity of stroke on clinical outcomes. Finally, our findings should be assessed in relation to MSC implemented in other health-care specialties. Funding The National Institute for Health Research Health Services and Delivery Research programme.


2015 ◽  
Vol 1109 ◽  
pp. 118-122 ◽  
Author(s):  
M.A. Farehanim ◽  
U. Hashim ◽  
Norhayati Soin ◽  
A.H. Azman ◽  
S. Norhafizah ◽  
...  

A simple technique for the fabrication of interdigitated electrode (IDEs) using conventional lithography was presented. A top-down simple lithography approach was used to fabricate a set of Interdigitated electrodes were patterned with aluminum metal. Silicon dioxide serves to isolate the electrode from the substrate. A chrome mask was proposed to complete this work. In this work, the proposed method was experimentally demonstrated by fabricating the IDEs structure 4-5μm, approximately. The dimensions of structure were determined by using scanning electron microscopy (SEM). It is a simple, easy-to-use and cost effective method and does not require complicated micro-lithography process for fabricating desired microelectrode in reproducible approach.


2020 ◽  
Vol 10 (12) ◽  
pp. 915
Author(s):  
Dora Brooks ◽  
Hanneke E. Hulst ◽  
Leon de Bruin ◽  
Gerrit Glas ◽  
Jeroen J. G. Geurts ◽  
...  

It has long been understood that a multitude of biological systems, from genetics, to brain networks, to psychological factors, all play a role in personality. Understanding how these systems interact with each other to form both relatively stable patterns of behaviour, cognition and emotion, but also vast individual differences and psychiatric disorders, however, requires new methodological insight. This article explores a way in which to integrate multiple levels of personality simultaneously, with particular focus on its neural and psychological constituents. It does so first by reviewing the current methodology of studies used to relate the two levels, where psychological traits, often defined with a latent variable model are used as higher-level concepts to identify the neural correlates of personality (NCPs). This is known as a top-down approach, which though useful in revealing correlations, is not able to include the fine-grained interactions that occur at both levels. As an alternative, we discuss the use of a novel complex system approach known as a multilayer network, a technique that has recently proved successful in revealing veracious interactions between networks at more than one level. The benefits of the multilayer approach to the study of personality neuroscience follow from its well-founded theoretical basis in network science. Its predictive and descriptive power may surpass that of statistical top-down and latent variable models alone, potentially allowing the discernment of more complete descriptions of individual differences, and psychiatric and neurological changes that accompany disease. Though in its infancy, and subject to a number of methodological unknowns, we argue that the multilayer network approach may contribute to an understanding of personality as a complex system comprised of interrelated psychological and neural features.


Sign in / Sign up

Export Citation Format

Share Document