An approach for reactive power configuration for wind power base considering the operation risk of power system

2013 ◽  
Author(s):  
Xu Yao ◽  
Tingting Fang ◽  
Xiaohu Li ◽  
Zheng Fu ◽  
Bolin Zhang ◽  
...  
Keyword(s):  
Power System ◽  
Wind Power ◽  
Reactive Power ◽  
Power Base ◽  
Operation Risk ◽  
Power Configuration

The Influence on Reactive Voltage of Large Scale Wind Power Connected to Grid

2013 ◽  
Vol 380-384 ◽  
pp. 2972-2976
Author(s):  
Xiang Yu Lv ◽  
Tian Dong ◽  
Ye Yuan ◽  
De Xin Li ◽  
Xiao Juan Han
Keyword(s):  
Power System ◽  
Wind Power ◽  
Influencing Factors ◽  
Large Scale ◽  
Reactive Power ◽  
Wind Power Integration ◽  
Power Fluctuations ◽  
The Impact

Large scale wind power integration has influenced the safety of power system. Taking wind power integration in Jilin as example, the paper describes the influencing factors of large scale wind power integration on reactive power of the grid in detail firstly, then analyze the reactive voltage in four typical ways, and discuss the impact of the wind power fluctuations on the grid reactive voltage.

Preliminary Study on the Influence of Wind Power on Low-Frequency Oscillation under Outward Transmitting Thermal Generated Power Bundled with Wind Power Typical Scene

2013 ◽  
Vol 391 ◽  
pp. 271-276
Author(s):  
Peng Li ◽  
Ning Bo Wang ◽  
De Zhi Chen ◽  
Xiao Rong Zhu ◽  
Yun Ting Song
Keyword(s):  
Power Systems ◽  
Power System ◽  
Wind Power ◽  
Wind Farm ◽  
Reactive Power ◽  
Simulation Analysis ◽  
Low Frequency ◽  
Simulation Software ◽  
Frequency Oscillation ◽  
Low Frequency Oscillation

Increasing penetration level of wind power integration has a significant impact on low-frequency oscillations of power systems. Based on PSD-BPA simulation software, time domain simulation analysis and eigenvalue analysis are employed to investigate its effect on power system low-frequency oscillation characteristic in an outward transmitting thermal generated power bundled with wind power illustrative power system. System damping enhances markedly and the risk of low-frequency oscillation reduce when the generation of wind farm increase. In addition, dynamic reactive power compensations apply to wind farm, and the simulation result indicates that it can improve dynamic stability and enhance the system damping.

Study of Influence on Power System Voltage Stability of Wind Farm Power Output Fluctuation

2013 ◽  
Vol 694-697 ◽  
pp. 846-849
Author(s):  
Jian Yuan Xu ◽  
Wei Fu Qi ◽  
Yun Teng
Keyword(s):  
Power System ◽  
Wind Power ◽  
Power Output ◽  
Voltage Stability ◽  
Wind Farm ◽  
Reactive Power ◽  
Simulation Analysis ◽  
Power Grid ◽  
Reactive Power Compensation ◽  
Grid Integration

This paper mainly studies wind power fluctuations how to affect voltage stability after the wind power grid integration, and reactive power compensation equipment on improving effect. In certain parts of the wind farm, for example, firstly, analyzing the wind farm reactive power problems. Then introduce the reactive power compensation equipment that used in the wind farm. Finally, with PSCAD software, making a simulation analysis about the influence on the power grid voltage according to adopting the different reactive power compensation devices or not.

The Study of Chopper in the LVRT of Direct-Drive Wind Energy Generation System

2014 ◽  
Vol 950 ◽  
pp. 314-320 ◽  
Author(s):  
Jun Jia ◽  
Xin Xin Hu ◽  
Ping Ping Han ◽  
Yan Ping Hu
Keyword(s):  
Power System ◽  
Wind Power ◽  
Wind Turbines ◽  
Reactive Power ◽  
Power Grid ◽  
Synchronous Generator ◽  
Direct Drive ◽  
Fault Ride Through ◽  
Wind Power System ◽  
The Stability

With the scale of wind farm continuously increasing, when grid fault, the influences of the wind turbines connected to the grid on the stability of the power grid can never be ignored. Therefore, there are higher standards of the wind turbines’ abilities of fault ride-through (FRT) and producing reactive power. This paper studies the direct-drive wind power system, and the main point is the fault ride-through (FRT) of the permanent magnetic synchronous generator (PMSG) with Chopper. By establishing the dynamic model of PMSG under the environment of DigSILENT, this paper simulates the fault ride-through (FRT) of the direct-drive wind power system connecting into power grid. During the research, we focus on the stability of voltage about the Chopper to the DC bus under faults. What’s more, in this paper, we analysis the data about how the Chopper help the DC bus to improve its stability. The simulation results show that: when there is a fault on the point of common coupling, the permanent magnetic synchronous generator has the capability of fault ride-through (FRT). Especially when there is a voltage dip on the grid side, the permanent magnetic synchronous generator could produce reactive power for power grid, effectively preventing the system voltage from declining seriously, so as to improve the system stability under faults.

Study on Loss Reduction of Large Scale Wind Power Concentrated Integration on Power System

2013 ◽  
Vol 380-384 ◽  
pp. 3051-3056 ◽  
Author(s):  
Xiao Dan Wu ◽  
Wen Ying Liu
Keyword(s):  
Power System ◽  
Wind Power ◽  
Power Loss ◽  
Large Scale ◽  
Wind Farm ◽  
Reactive Power ◽  
Low Voltage ◽  
Main Step ◽  
Loss Reduction ◽  
Wind Generators

In this paper, starting from the active network loss formulas and wind characteristics, it is pointed out the reactive power loss and reactive flow is the major impact of wind power integration on power system loss. The reactive power loss formulas of box-type transformer, main step-up transformer, wind farm collector line and connecting grid line are analyzed. Next the reactive power loss of transformer and transmission line is described in detail. Then put forward the loss reduction measures that installing SVC on the low voltage side of the main step-up transformer and making the doubly-fed wind generators send out some reactive power at an allowed power factor. Use the case of Gansu Qiaodong wind farm to verify the effectiveness of the proposed measures.

scholarly journals Hybrid PSO-Optimized ANFIS-Based Model to Improve Dynamic Voltage Stability

2019 ◽  
Vol 9 (4) ◽  
pp. 4384-4388 ◽  
Author(s):  
D. N. Truong ◽  
V. T. Bui
Keyword(s):  
Power System ◽  
Wind Power ◽  
Voltage Stability ◽  
Wind Farm ◽  
Reactive Power ◽  
Voltage Response ◽  
Inference System ◽  
Dynamic Voltage ◽  
Dynamic Voltage Stability ◽  
Wind Power System

The objective of this paper is to perform a hybrid design for an Adaptive Neuro-Fuzzy Inference System (ANFIS) optimized by Particle Swarm Optimization (PSO) to improve the dynamic voltage stability of a grid-connected wind power system. An onshore 99.2MW wind farm using Doubly Fed Induction Generator (DFIG) is studied. To compensate the reactive power absorbed from the power grid of the wind farm, a Static VAR Compensator (SVC) is proposed. To demonstrate the performance of the proposed hybrid PSO–ANFIS controller, simulations of the voltage response in time-domain are performed in Matlab to evaluate the effectiveness of the designed controller. From the results, it can be concluded that the proposed hybrid PSO-optimized ANFIS-based model can be applied to enhance the dynamic voltage stability of the studied grid-connected wind power system.

scholarly journals Research on improving low frequency oscillation characteristics of wind power system with DFIG-PSS-VI

2021 ◽  
Vol 252 ◽  
pp. 02001
Author(s):  
Ping He ◽  
Mingming Zheng ◽  
Zhao Li ◽  
Qiyuan Fang ◽  
Xiaopeng Wu
Keyword(s):  
Power System ◽  
Wind Power ◽  
Reactive Power ◽  
Low Frequency ◽  
Step Response ◽  
Frequency Oscillation ◽  
Low Frequency Oscillation ◽  
New Energy ◽  
Wind Power System ◽  
Virtual Impedance

The new energy represented by strong random wind power connecting to the power system may make the problem of inter-area low-frequency oscillation more serious. In this paper, a DFIG-PSS controller based on virtual impedance is constructed to solve the low-frequency oscillation problem in the wind power system. The step response of PSS-VI was carried out to test the effect of the controller to verify the advantages of PSS-VI than traditional PSS. The input signal of PSS-VI which is a controller based on PSS installed virtual impedance is the active power of DFIG. The output signal of PSS-VI is added to the reactive power control loop of rotor side controller of DFIG. DFIG-PSS-VI was built in Digsilent/Powerfactory software, and the simulation was carried out on the system of 4 machines and 2 regions. It is verified that PSS-VI can improve the low-frequency oscillation of wind power system.

Sign in / Sign up

Export Citation Format

Share Document