Ideal regenerative braking torque in collaboration with hydraulic brake system

2017 ◽  
Author(s):  
Jonathan Nadeau ◽  
Philippe Micheau ◽  
Maxime Boisvert
Keyword(s):  
Brake System ◽  
Regenerative Braking ◽  
Hydraulic Brake ◽  
Braking Torque

Optimization of Magnetorheological Brake

2011 ◽  
Author(s):  
Snegdha Gupta ◽  
Harish Hirani
Keyword(s):  
Minimum Weight ◽  
Hybrid Genetic Algorithm ◽  
Brake System ◽  
Outer Diameter ◽  
Current Accounting ◽  
Hydraulic Brake ◽  
Rate Dependent ◽  
Design Variables ◽  
Braking Torque ◽  
Gradient Based

Quick response and rheological properties as a function of magnetic field are well known features of MR fluids which inspire their usage as brake materials. Controllable torque and minimum weight of brake system are the deciding functions based on which the viability of the MR brake against the conventional hydraulic brake system can be judged. The aim of this study is to optimize a multi-disk magneto-rheological brake system considering torque and weight as objective functions and geometric dimensions of conventional hydraulic brake as constraints. The electric current accounting magnetic saturation, MR gap, number of disk, thickness of disk, and outer diameter of disk have been considered as design variables. To model the behavior of MR Fluid, Bingham and Herschel Bulkley models have been compared. To implement these models in estimating the braking torque a modification in shear rate dependent component has been proposed. The overall design of MR brake has been optimized using a hybrid (Genetic algorithm plus gradient based) optimization scheme of MATLAB software.

Skid Control of Small Electric Vehicles with In-Wheel Motors (Effect of ABS and Regenerative Brake Timing Control on Emergency Braking)

2015 ◽  
Vol 789-790 ◽  
pp. 927-931
Author(s):  
Mohamad Heerwan bin Peeie ◽  
Hirohiko Ogino ◽  
Yoshio Yamamoto
Keyword(s):  
Electric Vehicles ◽  
Control Method ◽  
Brake System ◽  
Regenerative Braking ◽  
Timing Control ◽  
Safety Device ◽  
Hydraulic Unit ◽  
Emergency Braking ◽  
Hydraulic Brake ◽  
Space Limitation

This paper presents an active safety device for skid control of small electric vehicles with in-wheel motors. Due to the space limitation on the driving tire, a mechanical brake system was installed rather than hydraulic brake system. For the same reason, anti-lock brake system (ABS) that is a basic skid control method cannot be installed on the driving tire. During braking on icy road or emergency braking, the tire will be locked and the vehicle is skidding. To prevent tire lock-up and vehicle from skidding, we proposed the combination of ABS and regenerative brake timing control. The hydraulic unit of ABS is installed on the non-driving tire while the in-wheel motors on the driving tire will be an actuator of ABS to control the regenerative braking force. The performance of the ABS and regenerative brake timing control on the emergency braking situation is measured by the simulation. The simulation result shows that the combination of ABS and regenerative brake timing control can prevent tire lock-up and vehicle from skidding.

The Car Brake System Design and Calculation

2013 ◽  
Vol 457-458 ◽  
pp. 340-343
Author(s):  
Yong Wang
Keyword(s):  
Distribution Coefficient ◽  
System Design ◽  
Brake System ◽  
Force Distribution ◽  
Drive Mechanism ◽  
Hydraulic Brake ◽  
Braking Torque ◽  
Braking Force

Calculation of car brake system design, also according to the known automotive related parameters is obtained by calculating the main parameters. The brake and braking torque, braking moment and braking force distribution coefficient and hydraulic brake drive mechanism related parameters. Finally, the braking performances are analyzed in detail.

Intelligent optimization of EV comfort based on a cooperative braking system

2021 ◽  
pp. 095440702110044
Author(s):  
Lingying Zhao ◽  
Min Ye ◽  
Xinxin Xu
Keyword(s):  
System Model ◽  
Regenerative Braking ◽  
Coupling Mechanism ◽  
Intelligent Algorithm ◽  
Distribution Strategy ◽  
Braking System ◽  
Logic Diagram ◽  
Braking Torque ◽  
Braking Force ◽  
The Time Domain

To address the comfort of an electric vehicle, a coupling mechanism between mechanical friction braking and electric regenerative braking was studied. A cooperative braking system model was established, and comprehensive simulations and system optimizations were carried out. The performance of the cooperative braking system was analyzed. The distribution of the braking force was optimized by an intelligent method, and the distribution of a braking force logic diagram based on comfort was proposed. Using an intelligent algorithm, the braking force was distributed between the two braking systems and between the driving and driven axles. The experiment based on comfort was carried out. The results show that comfort after optimization is improved by 76.29% compared with that before optimization by comparing RMS value in the time domain. The reason is that the braking force distribution strategy based on the optimization takes into account the driver’s braking demand, the maximum braking torque of the motor, and the requirements of vehicle comfort, and makes full use of the braking torque of the motor. The error between simulation results and experimental results is 5.13%, which indicates that the braking force’s distribution strategy is feasible.

Autonomous Emergency Braking Control Based on Hierarchical Strategy Using Integrated-Electro-Hydraulic Brake System

2017 ◽  
Author(s):  
Xiangkun He ◽  
Xuewu Ji ◽  
Kaiming Yang ◽  
Yulong Liu ◽  
Jian WU ◽  
...  
Keyword(s):  
Brake System ◽  
Emergency Braking ◽  
Hydraulic Brake ◽  
Braking Control

scholarly journals Application of FURIA for Finding the Faults in a Hydraulic Brake System Using a Vibration Analysis through a Machine Learning Approach

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Alamelu Manghai T. M ◽  
Jegadeeshwaran R
Keyword(s):  
Machine Learning ◽  
Fault Diagnosis ◽  
Decision Tree ◽  
Continuous Monitoring ◽  
Selection Process ◽  
Brake System ◽  
Learning Approach ◽  
Vibration Signals ◽  
Hydraulic Brake ◽  
Machine Learning Approach

Vibration-based continuous monitoring system for fault diagnosis of automobile hydraulic brake system is presented in this study. This study uses a machine learning approach for the fault diagnosis study. A hydraulic brake system test rig was fabricated. The vibration signals were acquired from the brake system under different simulated fault conditions using a piezoelectric transducer. The histogram features were extracted from the acquired vibration signals. The feature selection process was carried out using a decision tree. The selected features were classified using fuzzy unordered rule induction algorithm ( FURIA ) and Repeated Incremental Pruning to Produce Error Reduction ( RIPPER ) algorithm. The classification results of both algorithms for fault diagnosis of a hydraulic brake system were presented. Compared to RIPPER and J48 decision tree, the FURIA performs better and produced 98.73 % as the classification accuracy.

Master cylinder pressure reduction logic for cooperative work between electro-hydraulic brake system and anti-lock braking system based on speed servo system

2020 ◽  
Vol 234 (13) ◽  
pp. 3042-3055
Author(s):  
Lu Xiong ◽  
Wei Han ◽  
Zhuoping Yu ◽  
Jian Lin ◽  
Songyun Xu
Keyword(s):  
Feedback Control ◽  
Closed Loop ◽  
Servo System ◽  
Brake System ◽  
Extreme Condition ◽  
Pressure Reduction ◽  
Cylinder Pressure ◽  
Master Cylinder ◽  
Braking System ◽  
Hydraulic Brake

As one feasible solution of brake-by-wire systems, electro-hydraulic brake system has been made available into production recently. Electro-hydraulic brake system must work cooperatively with the hydraulic control unit of anti-lock braking system. Due to the mechanical configuration involving electric motor + reduction gear, the electro-hydraulic brake system could be stiffer in contrast to a conventional vacuum booster. That is to say, higher pressure peaks and pressure oscillation could occur during an active anti-lock braking system control. Actually, however, electro-hydraulic brake system and anti-lock braking system are produced by different suppliers considering brake systems already in production. Limited signals and operations of anti-lock braking system could be provided to the supplier of electro-hydraulic brake system. In this work, a master cylinder pressure reduction logic is designed based on speed servo system for active pressure modulation of electro-hydraulic brake system under the anti-lock braking system–triggered situation. The pressure reduction logic comprises of model-based friction compensation, feedforward and double closed-loop feedback control. The pressure closed-loop is designed as the outer loop, and the motor rotation speed closed-loop is drawn into the inner loop of feedback control. The effectiveness of the proposed controller is validated by vehicle experiment in typical braking situations. The results show that the controller remains stable against parameter uncertainties in extreme condition such as low temperature and mismatch of friction model. In contrast to the previous methods, the comparison results display the improved dynamic cooperative performance of electro-hydraulic brake system and anti-lock braking system and robustness.

Sign in / Sign up

Export Citation Format

Share Document