Purpose
The pressure sensors can convert external pressure or mechanical deformation into electrical power and signal, which cannot only detect pressure or strain changes but also harvest energy as a self-powered sensor. This study aims to develop a self-powered flexible pressure sensor based on regular nanopatterned polymer films.
Design/methodology/approach
In this paper, the self-powered flexible pressure sensor is mainly composed of two nanopatterned polymer films and one conductive electrode layer between them, which is a sandwich structure. The regular nanostructures increase the film roughness and contact area to enhance the friction effect. To enhance the performance of the pressure sensor, different nanostructures on soft polymer sensitive layers are fabricated using UV nanoimprint lithography to generate more triboelectric charges.
Findings
Finally, the self-powered flexible pressure sensor is prepared, which consists of sub-200 nm resolution regular nanostructures on the surface of the elastic layer and an indium tin oxide electrode thin film. By converting the friction mechanical energy into electrical power, a maximum power of 423.8 mW/m2 and the sensitivity of 0.8 V/kPa at a frequency of 5 Hz are obtained, which proves the excellent sensing performance of the sensor.
Originality/value
The acquired electrical power and pressure signal by the sensor would be processed in the signal process circuit, which is capable of immediately and sustainably driving the highly integrated self-powered sensor system. Results of the experiments show that this new pressure sensor is a potential method for personal pressure monitoring, featured as being wearable, cost-effective, non-invasive and user-friendly.
A Two-Degree-of-Freedom Cantilever-Based Vibration Triboelectric Nanogenerator for Low-Frequency and Broadband Operation
