Estimation of heat flux distribution in convective heat transfer system based on decentralized fuzzy inference

2017 ◽  
Author(s):  
Kun Wang ◽  
Guangjun Wang ◽  
Hong Chen ◽  
Fei Yan
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Flux Distribution ◽  
Fuzzy Inference ◽  
Transfer System ◽  
Heat Flux Distribution ◽  
Heat Transfer System

Fuzzy Adaptive Predictive Inverse for Nonlinear Transient Heat Transfer Process

2017 ◽  
Vol 139 (10) ◽  
Author(s):  
Guangjun Wang ◽  
Yanhao Li ◽  
Hong Chen ◽  
Shibin Wan ◽  
Cai Lv
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Inverse Method ◽  
Fuzzy Inference ◽  
Relationship Matrix ◽  
Transfer System ◽  
Nonlinear Transient ◽  
Heat Transfer System ◽  
Adaptive Ability ◽  
Fuzzy Adaptive

For nonlinear transient heat transfer system, a fuzzy adaptive predictive inverse method (FAPIM) is proposed to inverse transient boundary heat flux. The influence relationship matrix is utilized to establish time-varying linear prediction model of the temperatures at measurement point. Then, the predictive and measurement temperatures are used to inverse the heat flux at current moment by rolling optimization. A decentralized fuzzy inference (DFI) mechanism is established. The deviation vector of the predictive temperature is adopted to conduct decentralized inference by a set of fuzzy inference units, and then, the influence relationship matrix is updated online to guarantee the adaptive ability of the prediction model by weighting fuzzy inference components. FAPIM is utilized to inverse the unknown heat flux of a heat transfer system with temperature-dependent thermal properties, which has shown that the inverse method has better adaptive ability for the inverse problems of nonlinear heat transfer system.

Analysis of flow and heat transfer over stretching/shrinking and porous surfaces

2021 ◽  
pp. 875608792110258
Author(s):  
Azhar Ali ◽  
Dil Nawaz Khan Marwat ◽  
Aamir Ali
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Current Model ◽  
Uniform Heat Flux ◽  
Similarity Transformations ◽  
Flow And Heat Transfer ◽  
Special Cases ◽  
Porous Surfaces

Flows and heat transfer over stretching/shrinking and porous surfaces are studied in this paper. Unusual and generalized similarity transformations are used for simplifying governing equations. Current model includes all previous cases of stretched/shrunk flows with thermal effects discussed so far. Moreover, we present three different cases of thermal behavior (i) prescribed surface temperature (ii) Variable/uniform convective heat transfer at plat surface and (iii) prescribed variable/uniform heat flux. Stretching/shrinking velocity Uw(x), porosity [Formula: see text], heat transfer [Formula: see text], heat flux [Formula: see text] and convective heat transfer at surface are axial coordinate dependent. Boundary layer equations and boundary conditions are transformed into nonlinear ODEs by introducing unusual and generalized similarity transformations for the variables. These simplified equations are solved numerically. Final ODEs represent suction/injection, stretching/shrinking, temperature, heat flux, convection effects and specific heat. This current problem encompasses all previous models as special cases which come under the scope of above statement (title). The results of classical models are scoped out as a special case by assigning proper values to the parameters. Numerical result shows that the dual solutions can be found for different possible values of the shrinking parameter. A stability analysis is accomplished and apprehended in order to establish a criterion for determining linearly stable and physically compatible solutions. The significant features and diversity of the modeled equations are scrutinized by recovering the previous problems of fluid flow and heat transfer from a uniformly heated sheet of variable (uniform) thickness with variable (uniform) stretching/shrinking and injection/suction velocities.

Scalable Heat Transfer Characterization on Film Cooled Geometries Based on Discrete Green’s Functions

2020 ◽  
Author(s):  
Jorge Saavedra ◽  
Venkat Athmanathan ◽  
Guillermo Paniagua ◽  
Terrence Meyer ◽  
Doug Straub ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Flat Plate ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Green's Functions ◽  
Green’S Functions ◽  
Numerical Procedure ◽  
Local Heat Transfer ◽  
Sensitivity Matrix

Abstract The aerothermal characterization of film cooled geometries is traditionally performed at reduced temperature conditions, which then requires a debatable procedure to scale the convective heat transfer performance to engine conditions. This paper describes an alternative engine-scalable approach, based on Discrete Green’s Functions (DGF) to evaluate the convective heat flux along film cooled geometries. The DGF method relies on the determination of a sensitivity matrix that accounts for the convective heat transfer propagation across the different elements in the domain. To characterize a given test article, the surface is discretized in multiple elements that are independently exposed to perturbations in heat flux to retrieve the sensitivity of adjacent elements, exploiting the linearized superposition. The local heat transfer augmentation on each segment of the domain is normalized by the exposed thermal conditions and the given heat input. The resulting DGF matrix becomes independent from the thermal boundary conditions, and the heat flux measurements can be scaled to any conditions given that Reynolds number, Mach number, and temperature ratios are maintained. The procedure is applied to two different geometries, a cantilever flat plate and a film cooled flat plate with a 30 degree 0.125” cylindrical injection orifice with length-to-diameter ratio of 6. First, a numerical procedure is applied based on conjugate 3D Unsteady Reynolds Averaged Navier Stokes simulations to assess the applicability and accuracy of this approach. Finally, experiments performed on a flat plate geometry are described to validate the method and its applicability. Wall-mounted thermocouples are used to monitor the surface temperature evolution, while a 10 kHz burst-mode laser is used to generate heat flux addition on each of the discretized elements of the DGF sensitivity matrix.

Convective Heat Transfer Performance of FC-72 in a Pin-Finned Channel

2008 ◽  
Author(s):  
Liang-Han Chien ◽  
S.-Y. Pei ◽  
T.-Y. Wu
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Flow Rate ◽  
Smooth Surface ◽  
Heat Transfer Performance ◽  
Fluid Temperature ◽  
Transfer Performance ◽  
Finned Surface

This study investigates the influence of the heat flux and mass velocity on convective heat transfer performance of FC-72 in a rectangular channel of 20mm in width and 2 mm in height. The heated side has either a smooth surface or a pin-finned surface. The inlet fluid temperature is maintained at 30°C. The total length of the test channel is 113 mm, with a heated length of 25mm. The flow rate varies between 80 and 960 ml/min, and the heat flux sets between 18 and 50 W/cm2. The experimental results show that the controlling variable is heat flux instead of flow rate because of the boiling activities in FC-72. At a fixed flow rate, the pin-finned surface yields up to 20% higher heat transfer coefficient and greater critical heat flux than those of a smooth surface.

scholarly journals Thermal analysis in thin-film fluid regions of rectangular microgroove

2018 ◽  
Vol 22 (2) ◽  
pp. 899-897
Author(s):  
Xiaohong Gui ◽  
Xiange Song ◽  
Baisheng Nie
Keyword(s):  
Thin Film ◽  
Heat Transfer ◽  
Heat Flux ◽  
Contact Angle ◽  
Film Thickness ◽  
Flux Distribution ◽  
Total Heat ◽  
Heat Flux Distribution ◽  
Total Heat Transfer ◽  
Thin Film Thickness

The effects of contact angle and superheat on thin-film thickness and heat flux distribution occurring in a rectangle microgroove are numerically simulated. Accordingly, physical, and mathematical models are built in detail. Numerical results indicate that meniscus radius and thin-film thickness increase with the improvement of contact angle. The heat flux distribution in the thin-film region increases non-linearly as the contact angle decreases. The total heat transfer through the thin-film region increases with the improvement of superheat, and decreases as the contact angle increases. When the contact angle is equal to zero, the heat transfer in the thin-film region accounts for more than 80% of the total heat transfer. Intensive evaporation in the thin-film region plays a key role in heat transfer for the rectangle capillary microgroove. The liquid with higher wetting performance is more capable of playing the advantages of higher intensity heat transfer in thin- film region. The current investigation will result in a better understanding of thin- -film evaporation and its effect on the effective thermal conductivity in the rectangle microgroove.

scholarly journals Transient Heat Transfer in Rotating Cylinder - Thermography Measurement to Analyse Intense Heat Flux Distribution

2008 ◽  
Author(s):  
J.C. Batsale ◽  
J.P. Lasserre ◽  
M. Varenne-Pellegrini ◽  
V. Desormiere ◽  
L. Authesserre ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Flux Distribution ◽  
Rotating Cylinder ◽  
Transient Heat Transfer ◽  
Heat Flux Distribution ◽  
Intense Heat
Sign in / Sign up

Export Citation Format

Share Document