Eddy Current Effects on the Guiding System of High-Speed Maglev Train

2019 ◽  
Author(s):  
Yongpan Hu ◽  
Jiewei Zeng ◽  
Zhiqiang Long ◽  
Mingda Zhai
Keyword(s):  
Eddy Current ◽  
High Speed ◽  
Maglev Train ◽  
Guiding System

scholarly journals Research on Absolute Positioning Sensor Based on Eddy Current Reflection for High-Speed Maglev Train

Sensors ◽  
2020 ◽  
Vol 20 (18) ◽  
pp. 5167
Author(s):  
Xiaobo Hong ◽  
Jun Wu ◽  
Yunzhou Zhang ◽  
Yongxiang He
Keyword(s):  
Eddy Current ◽  
High Speed ◽  
The Novel ◽  
Maglev Train ◽  
Compact Structure ◽  
Absolute Positioning ◽  
Eddy Current Effect ◽  
Speed Range ◽  
The Impact ◽  
Detection Coil

A novel absolute positioning sensor for high-speed maglev train based on eddy current effect is studied in this paper. The sensor is designed with photoelectric switch and four groups of unilateral coplanar code-reading detection coil combination. The photoelectric switch realizes the positioning of the marker plate, and the four groups of detection coils read the mileage code of the mileage sign plate to obtain the absolute mileage information of the vehicle, which effectively reduces the quality and volume of the sensor, and reduces the impact of ice and snow. At the same time, the code-reading reliability and speed adaptability index are proposed. The code-reading reliability of the sensor is analyzed and tested under the fluctuation of levitation guidance, and the positioning error under the speed range of 0–600 km/h is calculated and analyzed. The results show that the novel sensor has the advantages of simple and compact structure. It still satisfies the system’s requirements for absolute vehicle mileage information under the conditions of vehicle operating attitude fluctuations and changes in the full operating speed range.

Performance analysis of magnetic gear with Halbach array for high power and high speed

2020 ◽  
Vol 64 (1-4) ◽  
pp. 959-967
Author(s):  
Se-Yeong Kim ◽  
Tae-Woo Lee ◽  
Yon-Do Chun ◽  
Do-Kwan Hong
Keyword(s):  
Permanent Magnet ◽  
Eddy Current ◽  
High Power ◽  
High Speed ◽  
Torque Ripple ◽  
Eddy Current Loss ◽  
Element Analysis ◽  
Current Loss ◽  
Halbach Array ◽  
Magnetic Gear

In this study, we propose a non-contact 80 kW, 60,000 rpm coaxial magnetic gear (CMG) model for high speed and high power applications. Two models with the same power but different radial and axial sizes were optimized using response surface methodology. Both models employed a Halbach array to increase torque. Also, an edge fillet was applied to the radial magnetized permanent magnet to reduce torque ripple, and an axial gap was applied to the permanent magnet with a radial gap to reduce eddy current loss. The models were analyzed using 2-D and 3-D finite element analysis. The torque, torque ripple and eddy current loss were compared in both models according to the materials used, including Sm2Co17, NdFeBs (N42SH, N48SH). Also, the structural stability of the pole piece structure was investigated by forced vibration analysis. Critical speed results from rotordynamics analysis are also presented.

scholarly journals Modeling and Analysis of a Linear Generator for High Speed Maglev Train

IEEE Access ◽  
2021 ◽  
Vol 9 ◽  
pp. 24637-24645
Author(s):  
Sansan Ding ◽  
Weitao Han ◽  
Jinji Sun ◽  
Fujie Jiang ◽  
Guimei Deng ◽  
...  
Keyword(s):  
High Speed ◽  
Maglev Train ◽  
Modeling And Analysis ◽  
Linear Generator

scholarly journals Three-Axis Inductive Displacement Sensor Using Phase-Sensitive Digital Signal Processing for Industrial Magnetic Bearing Applications

Actuators ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 115
Author(s):  
Teemu Sillanpää ◽  
Alexander Smirnov ◽  
Pekko Jaatinen ◽  
Jouni Vuojolainen ◽  
Niko Nevaranta ◽  
...  
Keyword(s):  
Signal Processing ◽  
Digital Signal Processing ◽  
Eddy Current ◽  
High Speed ◽  
Digital Signal ◽  
Magnetic Bearing ◽  
Air Gap ◽  
Sensor Design ◽  
Quadrature Demodulation ◽  
Displacement Sensors

Non-contact rotor position sensors are an essential part of control systems in magnetically suspended high-speed drives. In typical active magnetic bearing (AMB) levitated high-speed machine applications, the displacement of the rotor in the mechanical air gap is measured with commercially available eddy current-based displacement sensors. The aim of this paper is to propose a robust and compact three-dimensional position sensor that can measure the rotor displacement of an AMB system in both the radial and axial directions. The paper presents a sensor design utilizing only a single unified sensor stator and a single shared rotor mounted target piece surface to achieve the measurement of all three measurement axes. The sensor uses an inductive measuring principle to sense the air gap between the sensor stator and rotor piece, which makes it robust to surface variations of the sensing target. Combined with the sensor design, a state of the art fully digital signal processing chain utilizing synchronous in-phase and quadrature demodulation is presented. The feasibility of the proposed sensor design is verified in a closed-loop control application utilizing a 350-kW, 15,000-r/min high-speed industrial induction machine with magnetic bearing suspension. The inductive sensor provides an alternative solution to commercial eddy current displacement sensors. It meets the application requirements and has a robust construction utilizing conventional electrical steel lamination stacks and copper winding.

Sign in / Sign up

Export Citation Format

Share Document